Physicochemical and Mechanical Properties of Non-Isocyanate Polyhydroxyurethanes (NIPHUs) from Epoxidized Soybean Oil: Candidates for Wound Dressing Applications

Maria Morales-González,Manuel F. Valero,Luis E. Díaz

DOI: https://doi.org/10.3390/polym16111514

IF: 5

2024-05-28

Polymers

Abstract:Only 0.1% of polyurethanes available on the market are from renewable sources. With increasing concern about climate change, the substitution of monomers derived from petrochemical sources and the application of eco-friendly synthesis processes is crucial for the development of biomaterials. Therefore, polyhydroxyurethanes have been utilized, as their synthesis route allows for the carbonation of vegetable oils with carbon dioxide and the substitution of isocyanates known for their high toxicity, carcinogenicity, and petrochemical origin. In this study, polyhydroxyurethanes were obtained from carbonated soybean oil in combination with two diamines, one that is aliphatic (1,4-butadiamine (putrescine)) and another that is cycloaliphatic (1,3-cyclohexanobis(methylamine)). Four polyhydroxyurethanes were obtained, showing stability in hydrolytic and oxidative media, thermal stability above 200 °C, tensile strength between 0.9 and 1.1 MPa, an elongation at break between 81 and 222%, a water absorption rate up 102%, and contact angles between 63.70 and 101.39. New formulations of bio-based NIPHUs can be developed with the inclusion of a cycloaliphatic diamine (CHM) for the improvement of mechanical properties, which represents a more sustainable process for obtaining NIPHUs with the physicochemical, mechanical, and thermal properties required for the preparation of wound dressings.

polymer science

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to develop a non - isocyanate polyhydroxyurea (NIPHUs) based on renewable resources to replace polyurethane materials mainly made from petrochemical raw materials on the market at present, especially for wound dressing applications. Specifically, the research aims to synthesize NIPHUs by using modified soybean oil (carbonized soybean oil) and two different diamines (one is the aliphatic 1,4 - butanediamine (BDA), and the other is the cycloaliphatic 1,3 - cyclohexanebis(methylamine) (CHM)), and evaluate the physicochemical properties, mechanical properties and thermal stability of these new materials to determine whether they are suitable as candidate materials for wound dressings.

The research background of the paper points out that although there are many different types of polyurethane materials on the market, less than 0.1% of them are from renewable resources. With the increasing concern about climate change, finding monomers to replace petrochemical raw materials and adopting environmentally - friendly synthesis processes are crucial for the development of biomaterials. Therefore, the researchers chose to use soybean oil as the basic raw material, generate carbonized soybean oil by reacting with carbon dioxide, and then react with diamines to generate polyhydroxyurea. This process not only reduces the dependence on toxic isocyanates, but also improves the sustainability of the materials.

Through this research, the author hopes to develop new NIPHUs with the required physicochemical, mechanical and thermal properties, so that they can become an ideal choice for wound dressings, promote the wound healing process, reduce the incidence of chronic or non - healing wounds, and thus relieve the burden on the medical system.