Physicians' responsibility to assess patients' ability to operate a motor vehicle.

R. Dart

1997-08-01

Abstract:

What problem does this paper attempt to address?

Random Stepped-Frequency SAR Imagery With Full Cell Doppler Coherent Processing

GanE Dai,Lei Zhang,Sha Huan,Zhibin Wang

DOI: https://doi.org/10.1109/lgrs.2021.3053404

IF: 5.343

2022-01-01

IEEE Geoscience and Remote Sensing Letters

Abstract:Random stepped-frequency chirp waveform (RSFCW) is capable of achieving high-resolution synthetic aperture radar (SAR) imagery as well as certain electronic countermeasure capabilities. The Doppler-dependent phase incoherence due to the platform motion leads to degradation of the frequency synthesis of RSFCW. In this letter, a coherence processing algorithm for RSFCWSAR is developed with full cell Doppler correction (FCDC). The waveform structure of RSFCW is exploited to decompose the signal into different Doppler cells, which paves a way to the FCDC in phase alignment for frequency synthesis. Extensive simulation has confirmed the superiority of our method's performance in comparison to those of traditional techniques.

imaging science & photographic technology,remote sensing,engineering, electrical & electronic,geochemistry & geophysics
Waveform Design for Joint Communication and SAR Imaging Under Random Signaling

Bowen Zheng,Fan Liu

2024-03-26

Abstract:Conventional synthetic aperture radar (SAR) imaging systems typically employ deterministic signal designs, which lack the capability to convey communication information and are thus not suitable for integrated sensing and communication (ISAC) scenarios. In this letter, we propose a joint communication and SAR imaging (JCASAR) system based on orthogonal frequency-division multiplexing (OFDM) signal with cyclic prefix (CP), which is capable of reconstructing the target profile while serving a communication user. In contrast to traditional matched filters, we propose a least squares (LS) estimator for range profiling. Then the SAR image is obtained followed by range cell migration correction (RCMC) and azimuth processing. By minimizing the mean squared error (MSE) of the proposed LS estimator, we investigate the optimal waveform design for SAR imaging, and JCASAR under random signaling, where power allocation strategies are conceived for Gaussian-distributed ISAC signals, in an effort to strike a flexible performance tradeoff between the communication and SAR imaging tasks. Numerical results are provided to validate the effectiveness of the proposed ISAC waveform design for JCASAR systems.

Signal Processing
Adaptive waveform design in random stepped frequency radar

Tianyao Huang,Yimin Liu,Huadong Meng,Xiqin Wang

DOI: https://doi.org/10.1049/cp.2013.0494

2013-01-01

Abstract:Random stepped frequency (RSF) radar, whose carrier frequencies randomly hop pulse by pulse, improves the range-Doppler ambiguity and produces excellent electronic counter-countermeasures (ECCM) ability. Sparse Recovery technique improves the sensing performance of RSF radar by exploiting the sparsity of the observed targets. In this paper, a cognitive mechanism is implemented to further enhance the RSF radar. The transmitted waveforms, i.e. frequency-hopping codes, are adaptively designed to coordinate with the targets. We choose to minimize the Cramer-Rao bound on sparse recovery errors as the waveform-design criterion, and devise two corresponding algorithms. Simulations are performed, whose results demonstrate that the proposed cognitive mechanism introduces significant improvements on the performance of targets recovery.
Mitigation of Suppressive Interference in AMPC SAR Based on Digital Beamforming

Zhipeng Xiao,Feng He,Zaoyu Sun,Zehua Zhang

DOI: https://doi.org/10.3390/rs16152812

IF: 5

2024-08-01

Remote Sensing

Abstract:Multichannel Synthetic Aperture Radar (MC-SAR) systems, such as Azimuth Multi-Phase Centre (AMPC) SAR, provide an effective solution for achieving high-resolution wide-swath (HRWS) imaging by reducing the pulse repetition frequency (PRF) to increase the swath width. However, in an Electronic Countermeasures (ECM) environment, the image quality of multichannel SAR systems can be significantly degraded by electromagnetic interference. Previous research into interference and counter-interference techniques has predominantly focused on single-channel SAR systems, with relatively few studies addressing the specific challenges faced by MC-SAR systems. This paper uses the classical spatial filtering technique of adaptive digital beamforming (DBF). Considering the Doppler ambiguity present in the echoes, two schemes—Interference Reconstruction And Cancellation (IRC) and Channel Grouping Nulling (CGN)—are designed to effectively eliminate suppressive interference. The IRC method eliminates the effects of interference without losing spatial degrees of freedom, ensuring effective suppression of Doppler ambiguity in subsequent processing. This method shows significant advantages under conditions of strong Doppler ambiguity and low jammer-to-signal ratio. Conversely, the CGN method mitigates the effect of interference on multichannel imaging at the expense of degrees of freedom redundant to Doppler ambiguity suppression. It shows remarkable interference suppression performance under weak-Doppler-ambiguity conditions, allowing for better image recovery. Simulations performed on point and distributed targets have validated that the proposed methods can effectively remove interfering signals and achieve high-resolution wide-swath (HRWS) SAR images.

environmental sciences,imaging science & photographic technology,remote sensing,geosciences, multidisciplinary
Waveform Design Based ECCM Scheme Against Interrupted Sampling Repeater Jamming for Wideband MIMO Radar in Multiple Targets Scenario

Hao Zheng,Bo Jiu,Hongwei Liu

DOI: https://doi.org/10.1109/jsen.2021.3131491

IF: 4.3

2022-01-15

IEEE Sensors Journal

Abstract:In this paper, we propose a waveform design based electronic counter-countermeasures (ECCM) scheme against interrupted sampling repeater jamming (ISRJ) for wideband multiple-input multiple-output (MIMO) radar. The ECCM scheme includes two steps: ISRJ parameters estimation and ISRJ signal suppression. The ISRJ signal interpretations based on time-frequency (TF) domain and Doppler domain are proposed respectively. Based on the Doppler interpretation, a waveform with thumbtack ambiguity function and a corresponding multiple Doppler channels processing structure are proposed to obtain ISRJ parameters. According to the TF interpretation and the known ISRJ parameters, a waveform with desired TF distribution and a corresponding frequency filter processing strategy are proposed to suppress ISRJ signal. The proposed ECCM scheme can be directly used in phased-array mode without waveform optimization. Considering the multiple targets scenario, the simultaneous multiple beams technology in MIMO radar is preferred. Therefore, a constant modulus waveform design method is proposed to match the desired transmit beampattern and TF distribution. Besides, in order to further suppress the sidelobe output of ISRJ signal, an extended version of the proposed ECCM scheme in the slow-time dimension is proposed. Finally, the numerical simulations are provided to demonstrate the effectiveness of the proposed ECCM scheme in multiple targets scenario.

engineering, electrical & electronic,instruments & instrumentation,physics, applied
SAR Waveform and Mismatched Filter Design for Countering Interrupted-Sampling Repeater Jamming

Kai Zhou,Dexin Li,Sinong Quan,Tao Liu,Yi Su,Feng He

DOI: https://doi.org/10.1109/tgrs.2021.3107328

IF: 8.2

2022-01-01

IEEE Transactions on Geoscience and Remote Sensing

Abstract:The interrupted-sampling repeater jamming (ISRJ) is coherent and has the characteristic of suppression and deception to degrade the synthetic aperture radar (SAR) image quality. The anti-ISRJ methods are studied in this work in order to suppress the ISRJ based on the waveform and filter design for SAR. First, the relationship between the ISRJ and waveform is obtained by analyzing the principle of the ISRJ using the ambiguity function. The ISRJ produces multiple false targets based on the high Doppler tolerance of waveform and the characteristic of the matched filter. Next, a method is proposed to counter the ISRJ by transmitting a phase-coded (PC) waveform with low Doppler tolerance and designing the corresponding mismatched filter. The joint design method is then developed to improve the anti-ISRJ and imaging performance. In the proposed methods, the majorization minimization framework is introduced to solve the nonconvex waveform and filter design problem. Finally, several simulations are conducted to demonstrate the effectiveness of the proposed methods. Simulation results show that the joint design method shows better anti-ISRJ and imaging performance in comparison with the separate design method, but it is more sensitive to the ISRJ sampling duty ratio and period.

imaging science & photographic technology,remote sensing,engineering, electrical & electronic,geochemistry & geophysics
Countermeasures against SAR based on wideband digital receiver

Zang Xiaogang,Gong Xinbao,Ling Xiaofeng,Chang Cheng,Fan Ye

DOI: https://doi.org/10.3969/j.issn.1673-2421.2007.06.013

2007-01-01

Abstract:Deceptive electronic countermeasure(DECM) is an important technique against SARs.However,in order to achieve effective results,DECM system must obtain accurate and real-time estimations on important parameters of SAR such as center frequency,angle of arrival,pulse modulation,etc.Based on hardware implementation of wideband digital integrative receivers,a scheme of DECM system against SARs combining with digital techniques of wideband receivers is proposed.Preliminary test results demonstrate that the system obtains good measurements on important parameters of SARs such as frequency and frequency modulation slope.
Improved SAR Interrupted-sampling Repeater Jamming Countermeasure based on Waveform Agility and Mismatched Filter Design

Kai Zhou,Yi Su,Daoyou Wang,Hui Ma,Lianzhao Liu,Chao Li

DOI: https://doi.org/10.1109/tgrs.2023.3270351

IF: 8.2

2023-01-01

IEEE Transactions on Geoscience and Remote Sensing

Abstract:The interrupted-sampling repeater jamming (ISRJ) countermeasure is researched based on waveform agility and mismatched filter design in this work. By analyzing the effects of transmitted waveform on ISRJ imaging characteristic, the principle of the anti-ISRJ method is proposed. The ISRJ range processing gain and energy can be suppressed by designing the waveform and mismatched filter. Meanwhile, the ISRJ azimuth processing gain can be further restrained by utilizing the waveform agility. The anti-ISRJ problem is formulated and is then divided into several subproblems. The analytical solutions of waveform and mismatched filter are derived based on majorization minimization (MM), and a fast algorithm is proposed by applying a squared iterative method (SQUAREM). The fast implementation of the algorithm is derived, and computational complexity is $mathcal {O}({Nlog N})$ . Moreover, to improve the anti-ISRJ performance, the peak-to-average power ratio (PAR) constraint is introduced. Specifically, the waveform design subproblem under PAR constraint is solved, and thus, the PAR waveform can also be designed by the proposed algorithm. The simulation results verify that the proposed joint design algorithm shows significantly faster running speed than the conventional algorithms. The anti-ISRJ performance is superior to the existing methods, and the best anti-ISRJ performance can be obtained by applying the PAR waveform agility and mismatched filter design method.

imaging science & photographic technology,remote sensing,engineering, electrical & electronic,geochemistry & geophysics
Anti-jamming Method for SAR Using Joint Waveform Modulation and Azimuth Mismatched Filtering

Zhuan Sun,Zhanyu Zhu

2023-06-21

Abstract:High-fidelity deception jamming can seriously mislead Synthetic Aperture Radar (SAR) image interpretation and target detection, which is difficult to identify or eliminate through traditional anti-jamming methods. Based on the Range-Doppler Algorithm (RDA), an anti-jamming method for SAR by using joint waveform modulation and azimuth mismatched filtering is proposed in this paper. The signal model of SAR echo after pulse compression with deception jamming is derived from the radar detection and jamming characteristics. A multi-objective cost function is introduced to suppress the jamming level and keep the real target information, parameterized with the waveform initial phase and the azimuth mismatched filter coefficients, which is optimized using the second-order Taylor expansion approximation and the alternating direction multiplier method (ADMM). The performance of this proposed method is evaluated through the convergence analysis and anti-jamming experiments on the point target and the distributed target scenarios.

Signal Processing
Target Detection from SAR Images Based on Wavelet Transform De-Noise and Improved CFAR

Bo Zhao,Li Chen,Xiao Yang Zhou,Xin Yi He,Shu Run Tan,Hai Lin,Tie Jun Cui

DOI: https://doi.org/10.1117/12.832985

2009-01-01

Abstract:Target detection is an important part of an automatic target recognition (ATR) system. There would be many false alarms if using constant false alarm rate (CFAR) algorithm directly on complex synthetic aperture radar (SAR) images with tremendous speckle. Usually, the speckle should be reduced previously before CFAR. In this paper, a wavelet transform de-noise and an improved CFAR algorithm have been combined to detect military targets from SAR image. Different threshold methods were used in the wavelet domain when dealing with the detail information and non-detail information in the image to receive the edge information and reduce the speckle. Then a three-stage CFAR algorithm was used to detect the de-noised image. This algorithm contains global CFAR, local CFAR and count filters. Good results are obtained when the method is used to process high-resolution, HH polarization SAR images. Such algorithms could be arranged in the SAR image based automatic target recognition system.
A Novel CFAR Algorithm for Multi-target Detection with FMCW Radar

Zhihui Cao,Junjie Li,Chunyi Song,Zhiwei Xu,Xiaoping Wang

DOI: https://doi.org/10.1109/globecom42002.2020.9322140

2020-01-01

Abstract:Constant false alarm rate (CFAR) detection plays a vital role in frequency modulated continuous wave (FMCW) radar systems. Most existing CFAR algorithms need to estimate background level before determining the detection threshold. In a multi-target scene, existence of interference targets could cause inaccurate estimation of background level, which will then lead to severely degraded performance of the CFAR algorithm. This is also called multi-target shadowing effect. To overcome the challenge, a compressed sensing CFAR (CS-CFAR) is proposed in this work, which detects the target of interest (TOI) relying on the correlation between the linear measurements of signal and the sensing matrix, instead of relying on an estimated background level as in conventional CFAR algorithms, and achieves a required false alarm rate by estimating the distributed parameters of reduced sample model. Through doing so the proposed CS-CFAR algorithm effectively mitigates impact of interference targets on the detection performance. Superiority of the proposed algorithm over the conventional ones in multi-target scenarios is verified by both simulation and test results.
A New Waveform Design Method for Multi-Target Inverse Synthetic Aperture Radar Imaging Based on Orthogonal Frequency Division Multiplexing Chirp

Xuebo Zou,Guanghu Jin,Feng He,Yongsheng Zhang

DOI: https://doi.org/10.3390/rs16020308

IF: 5

2024-01-12

Remote Sensing

Abstract:With the increasing use of the strategy and group target attack method in the modern battlefield, multi-target inverse synthetic aperture radar (ISAR) imaging simultaneously with high efficiency draws more and more attention, which gives a promising prospect for aerospace target detection and recognition in the multi-target scenario. To overcome the shortcomings of traditional multi-target imaging with one beam at one pulse repetition time (PRT) based on phase array radar (PAR), this paper proposes a novel multi-target imaging waveform design method based on the newly full digital array radar (DAR). Firstly, we propose using radar waveform diversity with 2D orthogonality to realize multi-target ISAR imaging with high imaging quality and efficiency. Then, to meet the constant modulus requirement for maximizing the transmitting power, orthogonal frequency division multiplexing (OFDM) chirp theory is proposed to directly generate the transmit waveform instead of the traditional optimization method with the nonconvex problem for waveform design. Based on time-variant weighted and time diversity technology, a of group transmit waveforms is designed, which can form multiple beams simultaneously and make the signals arriving at different targets approximately orthogonal. Finally, simulations and experiments are carried out to demonstrate the effectiveness of the proposed method.

environmental sciences,imaging science & photographic technology,remote sensing,geosciences, multidisciplinary
Advancing Stepped-Waveform Radar Jamming Techniques for Robust False-Target Generation against LFM-CFAR Systems

Yanqi Wang,Chao Wang,Qingzhan Shi,Jingjian Huang,Naichang Yuan

DOI: https://doi.org/10.3390/s23187782

IF: 3.9

2023-09-11

Sensors

Abstract:This study investigates the utilization of a stepped wave frequency modulation jamming technique in radar systems. The objective is to enhance the effectiveness and robustness of false target jamming in the presence of linear frequency modulation (LFM) radars employing constant false alarm rate (CFAR) detection. The proposed method combines stepped frequency modulation with full pulse delay/sum repeat jamming to enhance resilience against uncertainties in target parameters. Theoretical analysis and simulation experiments are conducted to establish relationships between key jammer parameters, such as frequency slope and power compensation, and performance metrics, like false target distribution and CFAR masking. The results demonstrate that the proposed technique effectively maintains a dense distribution of false targets surrounding the protected target, even in the presence of uncertainties in position and signal-to-noise ratio. In comparison to existing methods, the utilization of stepped-waveform modulation enables improved control over target distribution and CFAR masking. Adaptive power allocation compensates for parameter errors, thereby enhancing robustness. Simulation results reveal that the proposed approach significantly reduces the probability of detecting the true target by over 95% under uncertain conditions, while previous methods experienced degradation. The integration of stepped waveforms optimizes false target jamming, thereby advancing electronic warfare capabilities in countering advanced radar threats. This study establishes design principles for resilient jamming architectures and supports enhanced survivability against radars employing pulse compression and CFAR detection. Moreover, the concepts proposed in this study have the potential for extension to emerging radar waveforms.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Waveform-Domain Complementary Signal Sets for Interrupted Sampling Repeater Jamming Suppression

Hanning Su,Qinglong Bao,Jiameng Pan,Fucheng Guo,Weidong Hu

2024-01-19

Abstract:The interrupted-sampling repeater jamming (ISRJ) is coherent and has the characteristic of suppression and deception to degrade the radar detection capabilities. The study focuses on anti-ISRJ techniques in the waveform domain, primarily capitalizing on waveform design and and anti-jamming signal processing methods in the waveform domain. By exploring the relationship between waveform-domain adaptive matched filtering (WD-AMF) output and waveform-domain signals, we demonstrate that ISRJ can be effectively suppressed when the transmitted waveform exhibits waveform-domain complementarity. We introduce a phase-coded (PC) waveform set with waveform-domain complementarity and propose a method for generating such waveform sets of arbitrary code lengths. The performance of WD-AMF are further developed due to the designed waveforms, and simulations affirm the superior adaptive anti-jamming capabilities of the designed waveforms compared to traditional ones. Remarkably, this improved performance is achieved without the need for prior knowledge of ISRJ interference parameters at either the transmitter or receiver stages.

Signal Processing
Phase Compensation and Image Autofocusing for Randomized Stepped Frequency ISAR

Lei Wang,Tianyao Huang,Yimin Liu

DOI: https://doi.org/10.1109/jsen.2019.2897014

IF: 4.3

2019-01-01

IEEE Sensors Journal

Abstract:Randomized stepped frequency (RSF) waveforms are attractive for inverse synthetic aperture radar (ISAR) imaging due to their synthetic-bandwidth system architecture and outstanding electronic counter-countermeasure characteristics. However, the extra complexities of the RSF radar's frequency oscillator and the target echo model make phase compensation and image autofocusing more complicated. In this paper, we introduce a novel method for the phase compensation and image autofocusing of RSF-ISAR. The new method consists of the following two stages: the first is a parametric coarse compensation for target radial motion, and the second is a non-parametric fine compensation for motion residuals and radar system imperfection. Two target models, a naive target consisting of unit point scatterers and a Yak-42 target obtained from field experiments, are used for numerical analysis, which shows the effectiveness and superiority of the proposed method.
Randomized Stepped Frequency Isar Imaging

Tianyao Huang,Yimin Liu,Gang Li,Xiqin Wang

DOI: https://doi.org/10.1109/radar.2012.6212202

2012-01-01

Abstract:Linearly stepped frequency (LSF) waveforms are widely equipped in inverse synthetic aperture radar (ISAR), where the frequency is linearly altered with a fixed frequency step in each burst. ISAR employing randomized stepped frequency (RSF) modulation improves the rang-Doppler resolution, widens the unambiguous Doppler window, and enhances performance in electronic counter-countermeasures (ECCM). However in RSF radar, range profiles can severely spread when the radial velocity is unknown. In this paper, we analytically derive the return signal model of a target rectilinearly moving at invariable speed, and devise a new algorithm to estimate the velocity and reconstruct the image of target. Numerical results demonstrate the effectiveness of the algorithm.
A Frequency Diverse Array SAR Processing Framework Based on the Segmented Phase Code Waveform for HRWS Imaging

Yuhao Wen,Zhimin Zhang,Zhen Chen,Haonan Zhao,Yongwei Zhang,Huaitao Fan

DOI: https://doi.org/10.1109/lgrs.2023.3308443

IF: 5.343

2023-09-09

IEEE Geoscience and Remote Sensing Letters

Abstract:Frequency diverse array synthetic aperture radar (FDA-SAR) has been recognized as a potential technique for high-resolution wide-swath (HRWS) imaging, and employs a slight frequency increment to the transmitting subapertures/channels to form a range-dependent beam pattern for swath widening. The key challenge of FDA-SAR is echo separation at the receiver. Former studies have employed quasi-orthogonal waveforms with low cross correlation energies as the transmitted signals, which cannot ensure reliable echo separation, especially for distributed scatterers. In this letter, an FDA-SAR processing framework is proposed based on the segmented phase code (SPC) waveform. An encoding scheme and a notch-expanding receiving beamformer based on convex optimization are used for precise echo separation. Then, using the degrees of freedom (DOFs) on transmitting, a beamformer is applied to resolve range ambiguities. The proposed scheme avoids the performance deterioration caused by the echo separation issue, even for distributed scatterers, while allowing other multiple-channel techniques to be integrated. Simulation experiments have validated the effectiveness of the proposed scheme.

imaging science & photographic technology,remote sensing,engineering, electrical & electronic,geochemistry & geophysics
A Sparse Imaging Method for Frequency Agile SAR

Kai Zhou,Dexin Li,Feng He,Sinong Quan,Yi Su

DOI: https://doi.org/10.1109/tgrs.2022.3151079

IF: 8.2

2022-01-01

IEEE Transactions on Geoscience and Remote Sensing

Abstract:Frequency agility increases the difficulty of jammers to predict and estimate the carrier frequency and, thus, improves the radar electronic counter-countermeasures (ECCM) performance. In this article, frequency agility is introduced into synthetic aperture radar (SAR). The characteristic of the Doppler history of frequency-agile SAR (FASAR) is analyzed, which shows that the azimuth compression could not be achieved by the classic imaging algorithms. In order to reconstruct the images of interested targets, a three-channel sparse imaging method is proposed based on approximated observation model by using the echo data of different carrier frequencies. By deriving the equivalent observation model, it is concluded that the reconstruction performance can be enhanced by improving the coherence of match filter imaging results in different channels. The image characteristic of different channels in FASAR is analyzed based on the chirp scaling imaging operator. A phase compensation method is then proposed to improve the coherence of images of interested targets in different channels. Specifically, the SAR mode of random frequency agility is proposed to improve the reconstruction performance. Finally, simulations are carried out to demonstrate the effectiveness of imaging methods and ECCM performance. Theoretical analysis and simulation results demonstrate that images generated in random FASAR have better performance than those in stepped FASAR. By performing the phase compensation, the reconstruction performance of small targets can be significantly improved.

imaging science & photographic technology,remote sensing,engineering, electrical & electronic,geochemistry & geophysics
Orthogonal waveform design with fractional programming on the ambiguity suppression of SAR systems

Zhang, Yongwei

DOI: https://doi.org/10.1007/s11432-023-4076-7

2024-08-26

Science China Information Sciences

Abstract:Waveform diversity (WD) represents a dynamic and transformative technology widely used in radar systems to enhance sensitivity and discrimination capabilities. Recently, WD techniques have been extensively explored for their potential ambiguity suppression within synthetic aperture radar (SAR) systems. Among these, the alternate transmitting mode combined with orthogonal waveforms emerges as a particularly promising solution. This study focuses on optimizing the power spectrum density (PSD) of signals to design and generate an orthogonal waveform pair that achieves both a low cross-correlation-to-autocorrelation ratio (CAR) and satisfactory imaging performance. Initially, we construct a fractional programming model with convex constraints to minimize the CAR. To address this challenge, we introduce an iterative optimization procedure for the PSD variable, which sequentially reduces the CAR. Each optimization step can be efficiently solved using a quadratically constrained quadratic program, ensuring that the resulting computational complexity remains low. Building on the optimized PSD, we established a parametric piecewise linear model to generate an orthogonal waveform pair. This model not only maintains a low CAR but achieves satisfactory imaging performance in real-time applications. Consequently, this orthogonal waveform pair effectively suppresses range ambiguity in SAR systems. Finally, we demonstrated the practicability and effectiveness of the proposed orthogonal waveforms through detailed simulation experiments, specifically targeting ambiguity suppression in conventional quad-polarization SAR systems.

computer science, information systems,engineering, electrical & electronic
Intra-Pulse Frequency Coding Design for a High-Resolution Radar Against Smart Noise Jamming

Rongyan Xi,Dingyou Ma,Xiang Liu,Lei Wang,Yimin Liu

DOI: https://doi.org/10.3390/rs14205149

IF: 5

2022-01-01

Remote Sensing

Abstract:Smart noise jamming forms active jamming by intercepting, modulating, and forwarding radar signals into the radar receiver, which seriously affects the radar range recovery performance. In this paper, we propose a novel waveform design approach and an efficient range recovery method for high-resolution radar in the jamming scenario. Firstly, we propose an intra-pulse frequency-coded frequency-modulated continuous waveform (IPFC-FMCW), which contains multiple FMCW chips with different widths and frequencies, to combat the smart noise jamming. After the jamming suppression, the proposed waveform has a low sidelobe level, which is different from traditional FMCW signals for which the observations are periodically missing, resulting in high sidelobe levels. Then, to improve the range recovery performance of the waveform after jamming suppression, we optimize the range profile by designing the transmit waveform and then solve it by a simulated annealing algorithm. Next, based on the designed waveform, we derive the echo model after jamming suppression and propose a gridless compressed sensing (CS) method to recover the range of the targets. Compared with the existing waveforms and methods, the proposed waveform and the processing method achieve better range recovery performance in the jamming scenario. Numerical simulations are utilized to demonstrate the range recovery effectiveness of the proposed waveform and method in smart noise jamming.

Physicians' responsibility to assess patients' ability to operate a motor vehicle.

Random Stepped-Frequency SAR Imagery With Full Cell Doppler Coherent Processing

Waveform Design for Joint Communication and SAR Imaging Under Random Signaling

Adaptive waveform design in random stepped frequency radar

Mitigation of Suppressive Interference in AMPC SAR Based on Digital Beamforming

Waveform Design Based ECCM Scheme Against Interrupted Sampling Repeater Jamming for Wideband MIMO Radar in Multiple Targets Scenario

SAR Waveform and Mismatched Filter Design for Countering Interrupted-Sampling Repeater Jamming

Countermeasures against SAR based on wideband digital receiver

Improved SAR Interrupted-sampling Repeater Jamming Countermeasure based on Waveform Agility and Mismatched Filter Design

Anti-jamming Method for SAR Using Joint Waveform Modulation and Azimuth Mismatched Filtering

Target Detection from SAR Images Based on Wavelet Transform De-Noise and Improved CFAR

A Novel CFAR Algorithm for Multi-target Detection with FMCW Radar

A New Waveform Design Method for Multi-Target Inverse Synthetic Aperture Radar Imaging Based on Orthogonal Frequency Division Multiplexing Chirp

Advancing Stepped-Waveform Radar Jamming Techniques for Robust False-Target Generation against LFM-CFAR Systems

Waveform-Domain Complementary Signal Sets for Interrupted Sampling Repeater Jamming Suppression

Phase Compensation and Image Autofocusing for Randomized Stepped Frequency ISAR

Randomized Stepped Frequency Isar Imaging

A Frequency Diverse Array SAR Processing Framework Based on the Segmented Phase Code Waveform for HRWS Imaging

A Sparse Imaging Method for Frequency Agile SAR

Orthogonal waveform design with fractional programming on the ambiguity suppression of SAR systems

Intra-Pulse Frequency Coding Design for a High-Resolution Radar Against Smart Noise Jamming