[Calcified gastric cancer: traditional study, CT and differential diagnosis].

G. Vadalà,S. Failoni,F. Tramontana

La radiologia medica

Abstract:

What problem does this paper attempt to address?

The Electrochemical Characterization of Rebar Passivation Film in Simulated Concrete Media

Gan Weizhong,Jin Weiliang,Shao Jianping

DOI: https://doi.org/10.4028/www.scientific.net/amr.255-260.539

2011-01-01

Advanced Materials Research

Abstract:Based on the fundamental theory of electrochemical anodic polarization, simulated concrete is doped with corrosion inhibitor to prevent corrosion by chloride ion in the marine environment. Thus, with reference to the potential-time curves obtained in different concrete environments and construction conditions, the early dynamic state of active transition of rebar passive films in concretes can be quickly characterized. According to the experiments, the characteristics of passive active transition are synchronous with rebar corrosion. This helps to systematically study the influence of different components of concrete and external media on the durability of the concrete structure. The strong alkaline environment of the concrete is useful in controlling corrosion rate of reinforcing bar. As one of the additional protective measures of the durability of the concrete structure, corrosion inhibitor's long-term performance contains uncertainty.
Anticorrosion Performance and Field Application of a New Rebar Inhibitor

Zhou Yang Lian,Jun Cheng Jiang,Dong Sheng Chen,Wu Ji Wei,Yong Zhang Zhou

DOI: https://doi.org/10.4028/www.scientific.net/amm.310.95

2013-01-01

Applied Mechanics and Materials

Abstract:The anticorrosion performance and field application of a new rebar inhibitor were evaluated through the tests of half-cell potential and weight loss. The results indicated that half-cell potential of rebar had a negative shift with the addition of chloride ion, so it took long time to reach the stable potential. With the increase of chloride ion in the system, half-cell potential was more difficult to achieve stability. When chlorine ion content was low, inhibition effect was very obvious. Inhibition efficiency was 85.53% without chlorine ion and 85.74% with 1.0%NaCl by weight loss. New Rebar Inhibitor had no effect on the mechanical properties of concrete, which had good protective effect on concrete pipe rack in using.
Effectiveness Protection Performance of an Internal Blending Organic Corrosion Inhibitor for Carbon Steel in Chloride Contaminated Simulated Concrete Pore Solution

Penggang Wang,Yuan Wang,Tiejun Zhao,Chuansheng Xiong,Peizhen Xu,Juan Zhou,Zhihong Fan

DOI: https://doi.org/10.3151/jact.18.116

2020-03-25

Journal of Advanced Concrete Technology

Abstract:Application of corrosion inhibitors is considered as one of the most economical and effective solutions for the protection of reinforced concrete structures under severe environment. The aim of this paper is to investigate the protection performance and mechanism of an internal blending organic inhibitor for carbon steel in chloride contaminated simulated concrete pore solution. The influences of concentration of inhibitor, chloride content and pH value of the solutions on the protection efficiency were investigated. Both weight loss and electrochemical were used to evaluate the protection efficiency of the inhibitor. Scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectroscopy (FTIR) analyses were performed to reveal the mechanism of corrosion resistance of the inhibitor. Results indicated that the corrosion of carbon steel in chloride contaminated simulated concrete pore solution was highly resisted in presence of inhibitor, the inhibition efficiency of 3.5% NaCl saturated Ca(OH)2 solution with 4% inhibitor reached 89%. With lower pH value, corrosion of steel will happen easier even with addition of inhibitor. However, inhibitor will still have effective even to protect carbon steel in fully carbonated concrete. The organic film with characteristics of aromatic groups can be detected on the carbon steel surface in presence of inhibitor, confirming the protection effects for steel.

construction & building technology,materials science, multidisciplinary,engineering, civil
Bidirectional Electromigration of A Corrosion Inhibitor in Chloride Contaminated Concrete

Chen Xu,Wei-liang Jin,Nan Huang,Hang Tong Wu,Zhi Yuan Li,Jiang Hong Mao

DOI: https://doi.org/10.1680/jmacr.15.00121

IF: 2.46

2016-01-01

Magazine of Concrete Research

Abstract:Triethylenetetramine (TETA), as a corrosion inhibitor for steel in aqueous media, was introduced into chloride-contaminated concrete, specimens by using a novel method called bidirectional electromigration rehabilitation (BIEM). An electric field was applied between embedded steel cathodes and external anodes to inject the corrosion inhibitor from external electrolytes into the concrete, and at the same time to extract the chloride ions from the concrete cover zone. In part 1, after the treatment, the specimens were drilled to determine the concentration profiles of the corrosion inhibitor, chloride and hydroxyl ions within the concrete. The effects of variations in the applied current density, duration of electrolysis, water/cement ratio, initial chloride content and surface carbonation on the concentration profiles of the proposed ions were determined. Electrochemical chloride extraction (ECE), in which saturated calcium hydroxide solution was used as an external electrolyte, was applied in control experiments. As expected, chloride content decreased and alkalinity increased after the treatment. Also, the concentration of the inhibitor injected around the embedded steel bars was adequate to provide corrosion protection. The results can provide a direction in designing the BIEM process.
Rust Prevention Property of a New Organic Inhibitor under Different Conditions

Xingxing Guo,Chengsheng Wang,Hua Fu,Li Tian,Hua Song

DOI: https://doi.org/10.3390/ma17092168

2024-05-06

Abstract:The corrosion resistance properties of a new type of environmentally-friendly organic inhibitor containing amino ketone molecules are presented in this paper. To evaluate the prevention effect of the inhibitor on corrosion of reinforcement, the electrochemical characteristics of steels in the simulated concrete pore solution (SPS) were investigated under varied conditions of the relevant parameters, including concentrations of the inhibitor and NaCl, pH value, and temperature. The inhibition efficiency of the material was characterized through electrochemical impedance spectroscopy (EIS), potentiodynamic polarization, and the weight loss of steels. The results reveal a significant improvement in the corrosion resistance of steels with the inhibitor. A maximum resistance value of 89.07% was achieved at an inhibitor concentration of 4%. Moreover, the new organic inhibitor exhibited good corrosion protection capability for steels under different NaCl concentrations. Its inhibition efficiency was determined to be 65.62, 80.06, and 66.30% at NaCl concentrations of 2, 3.5 and 5%, respectively. On the other hand, it was found that an alkaline environment was favorable for an enhanced corrosion prevention effect, and an optimal pH value of 11.3 was observed in this work. Besides, the inhibition efficiencies at different temperatures showed a trend of 25 > 35 > 40 > 20 > 30 °C, with a maximum value of 81.32% at 25 °C. The above results suggest that the new organic material has high potential to be used as an eco-friendly and long-term durable inhibitor for steel corrosion prevention under complex conditions.
Development of Migrating Corrosion Inhibitor in Reinforced Concrete

PAN Chonggen,LI Yiyi,SHU Dongdong,WANG Zeng,ZHU Shaoj ie,MAO Jianghong,JIN Weiliang

DOI: https://doi.org/10.11896/j.issn.1005-023x.2016.013.023

2016-01-01

Abstract:Steel bar corrotion-induced durability degradation has received extensive attention from all over the world.Migrating corrosion inhibitor can improve the durability of concrete effectively,and it′s well compatible with structure of concrete.The economy of migrating corrosion inhibitor is also superior than inorganic corrosion inhibitor. In this paper,the corrosion reason of concrete and mechanism of migrating corrosion inhibitor are analyzed.Subse-quently,domestic and foreign developments of migrating corrosion inhibitor are introduced,also with the property tes-ting and evaluation method of migrating corrosion inhibitor.Finally,Application problems of migrating corrosion in-hibitor are summarized.
Characteristics, interventions, and outcomes of misdiagnosed delirium in cancer patients

Tomomi Wada,M. Wada,M. Wada,Hideki Onishi

DOI: https://doi.org/10.1017/S1478951509990861

2010-03-23

Palliative & Supportive Care

Abstract:Abstract Objective: Although delirium is a common psychiatric complication in cancer patients, it is often not accurately recognized. To date, the characteristics and outcome of misrecognized patients are unclear in the cancer setting. This retrospective study was planned to determine the recognition by oncologists at the psychiatric consultation, characteristics, reversibility and outcome of misrecognized patients with delirium. Method: We reviewed charts of 60 patients diagnosed with delirium by the psycho-oncologists who were referred to the psychiatric consultation by the oncologists. Information about demographics, initial assessment by the oncologists, delirium subtype, precipitating factors, intervention for delirium, reversibility, and final status was obtained. Results: Twenty-two among 60 delirious patients were misrecognized by the oncologists at the time of consultation. They were often diagnosed as having anxiety or other psychiatric disorders. Misrecognized participants were significantly younger than accurately recognized cases of delirium. The psychiatrists made suggestions to the oncologists for all the referred patients, even when they were accurately diagnosed with delirium before consultation. For the correctly recognized patients, the main suggestion was pharmacological reevaluation. For the misdiagnosed cases, the psychiatrists suggested a reconsideration of the strategy for cancer treatment and the provision of information to the patient's family members about their condition. Significance of Results: Despite its high prevalence, delirium is difficult to diagnose for non-psychiatric physicians. Its detection is important not only to give the best treatment option to cancer patients but also to provide the best opportunity to inform their family about their condition and end-of-life issues.
Analysis of Polarization Curves Characteristics of Rebar in Concrete

Chen XU,Weiliang JIN,Zhiyuan LI,Zengguo YUE

DOI: https://doi.org/10.3969/j.issn.1674-4764.2012.05.010

2012-01-01

Abstract:To avoid equilibrium potential shifts in polarization curve test,based on anodic polarization current method,the critical polarization current density of steel corrosion was given as well as the corresponding empirical formula of corrosion current density.Reasonable explanation to equilibrium potential shifts was given by studying polarization curves characteristic of rebar in concrete before and after corrosion.The results show that anodic polarization current method can effectively distinguish steel corrosion,and the critical polarization current density is 0.2 μA/cm2.
1-Benzyl-4-Phenyl-1H-1,2,3-Triazole as a Green Corrosion Inhibitor for Carbon Steel Reinforcing Bars in Concrete Elements

Loreto J Pamatmat Dacio,Jorge Escribano,Oladis Troconis de Rincon,Leonardo X. Alvarez,Brendy Carolina Rincon Troconis

DOI: https://doi.org/10.1149/ma2023-02111081mtgabs

2023-12-22

ECS Meeting Abstracts

Abstract:Reinforced concrete (RC) plays a crucial role in the construction of structures around the world. But these structures are frequently subjected to corrosive conditions, which can degrade their structural performance, shorten their service life, resulting in failure with catastrophic consequences. The concrete high pH stabilizes the formation of an oxide passive layer on the rebar. Nevertheless, this protective film can be compromised if the chloride ion concentration threshold is reached at the steel rebar surface, which can occur as the structure ages while exposed to chloride containing environments. Considering growing environmental concerns about the effectiveness of existing corrosion control methods, this study investigates the potential of 1-Benzyl-4-Phenyl-1H-1,2,3-Triazole (BPT), an organic compound, as a green corrosion inhibitor for rebar corrosion. BPT was found to inhibit corrosion of mild steel in acidic environments and has been synthesized in an eco-friendly and sustainable method. The objective of this work is to evaluate the corrosion inhibition of BPT to protect steel reinforcement in simulated marine environments. BPT was evaluated in synthetic pore solution (SPS, 8.33 g/L NaOH + 23.3 g/L KOH + 2.0 g/L Ca(OH) 2 , pH: 13.6) in the presence of chlorides to determine its optimal concentration. Exposure took place following a modified version of ASTM G180. In addition different electrochemical techniques were used including linear polarization resistance, electrochemical impedance spectroscopy (EIS) and cyclic potentiodynamic polarization. Then, mortar specimens containing BPT were tested under accelerated exposure by simulated seawater spray (modified ISO 11474) and the electrochemical response characterized using electrochemical techniques. Also, the physical-mechanical properties were evaluated. The BPT was found to provide different mechanisms to inhibit rebar corrosion including, adsorption on the material (EIS results) and reduced mortar permeability (resistivity and capillary absorption tests). Furthermore, BPT (at the optimal concentration) did not affect the mechanical properties of the mortar. This work highlights the efficacy of an eco-friendly corrosion control technology to extend the service life of critical reinforced concrete structures for a sustainable future.
Investigation on the Effect of Corrosion-Inhibiting-waterproofing Compacting Agent on Inhibiting Corrosion

Zi-li GUO,Dong-jie ZHANG,Xiang-ming KONG,Yong-jie LI

DOI: https://doi.org/10.3969/j.issn.1002-3550.2012.09.028

2012-01-01

Abstract:The corrosion-inhibiting-waterproofing compacting agent is an admixture that can decrease corrosion of the rebar in the concrete,raise the impervious ability of concrete,reduce shrinkage and prevent cracking of cementitious materials.Three ways including polarization potential of fresh mortar,drying and wetting cycles,electrochemistry synthesisare used to make experimental investigation on effect of corrosion-inhibitingwaterproofing compacting agent on inhibiting corrosion.The results show that this kind of corrosion-inhibiting-waterproofing compacting agent truly can effectively reduce the corrosive condition of the rebar in the reinforced concrete and prolong its normal working performance.
Study of Wiring Method on Accelerated Corrosion of Steel Bars in Concrete

Qiang Li,Xianyu Jin,Dongming Yan,Chuanqing Fu,Jun Xu

DOI: https://doi.org/10.1016/j.conbuildmat.2020.121286

IF: 7.4

2021-01-01

Construction and Building Materials

Abstract:Corrosion of steel reinforcement severely affects the load-bearing capacity of reinforced concrete elements. Accelerated corrosion of reinforcement by electrolytic methods (i.e., impressed current methods) is an effective technique to obtain corroded concrete specimens in a short time. To study the applicability of the accelerated corrosion methods, this study artificially induces corrosion in the longitudinal reinforcement and stirrups, and investigates the effects of different wire connection methods on the corrosion characteristics. The amount of rust, surface morphology of rusted steel, morphology of corrosion product, rate of corrosion, and mechanical properties of corroded specimens were investigated. The results show that under the same corrosion condition, the rusting occurs first in the stirrups, and the corrosion rate of stirrups is higher than that of longitudinal reinforcement, regardless of the wiring method. Under the same targeted corrosion rate, the corrosion-induced expansion and surface morphology are identical for different wiring methods. The ultimate bearing capacity and stiffness of corroded specimens decrease with the increase of corrosion rate. The connection method has little influence on the bearing capacity, stiffness, strain, macroscopic mechanical properties, and failure characteristics of the corroded specimens. (C) 2020 Elsevier Ltd. All rights reserved.
Influence of Threshold Chloride Concentration on Corrosion Behavior of Low-Alloy Steel Rebar in Concrete Pore Solutions

Ziyi Zhang,

DOI: https://doi.org/10.20964/2020.10.20

IF: 1.541

2020-10-01

International Journal of Electrochemical Science

Abstract:Corrosion of steel reinforced concrete by the chloride-induced is the most common types of degradation in the building and construction industry. Here, the corrosion behavior of Chromium (Cr)- modified low-carbon and low-alloy steel rebars exposed to simulated concrete pore solution (SCPS) with different chloride content were studied by the electrochemical impedance spectroscopy (EIS) technique. EIS results indicate that Cr-modified low-alloy steel reveal a higher corrosion protection with a high level of threshold chloride in SCPS and higher impedance than the low-carbon steel. The double-layer capacitance values were reduced as pH value gradually increased, which indicates that the thickness of the passive layer was enhanced, resulting in an increase in the protective capacity. Scanning electron microscopy investigation confirmed the results attained by EIS measurement. The findings show that low-alloy steel indicates higher resistance of pitting corrosion because of the formation of Cr-enriched stable and protective rust layer.

electrochemistry
Corrosion Behaviors of Tetrasodium Iminodisuccinate (IDS) as an Environmentally Friendly Inhibitor: Experimental and Theoretical Studies

Shaopeng Fu,Xingyao Yang,Yichun Peng,Qi Wang,Qinghao Sun,Junwei Zhang,Xinping Wang,Zezhou Liang,Jianfeng Li

DOI: https://doi.org/10.3390/coatings13030613

IF: 3.236

2023-03-15

Coatings

Abstract:An environmentally friendly chelating agent, tetrasodium iminodisuccinate (IDS), was investigated as an inhibitor in the simulated concrete pore solution on Q235 carbon steel by using Tafel polarization (TF), electrochemical impedance spectroscopy (EIS) and surface morphology tests. The EIS and TF results indicate that the IDS is a mixed type of inhibitor and exhibits excellent protection efficiency (97.54%) at 200 mg/L. Furthermore, based on the Langmuir adsorption isotherm, IDS protects carbon steel through physical and chemical adsorption. Besides, density functional theory (DFT) and molecular dynamics (MD) simulations are applied to explore the inhibition mechanism to support the experimental data, indicating that IDS can be used as a new green corrosion inhibitor.

materials science, multidisciplinary,physics, applied, coatings & films
Inhibition Effect of Hydrophobic Functional Organic Corrosion Inhibitor in Reinforced Concrete

Jinzhen Huang,Jie Hu,Jinshun Cai,Haoliang Huang,Jiangxiong Wei,Qijun Yu,Huang,Hu,Cai,Huang,Wei,Yu

DOI: https://doi.org/10.3390/ma15207124

IF: 3.4

2022-10-14

Materials

Abstract:Using an admixed organic corrosion inhibitor is one of the most efficient strategies to enhance the corrosion resistance and durability of reinforced concrete. However, traditional admixed organic corrosion inhibitors only increase the corrosion resistance of the embedded reinforcing steel, and the optimization effect on the pore structure and the impermeability of concrete is very limited. In this study, in order to evaluate the corrosion-inhibition effect of a novel hydrophobic functional organic corrosion inhibitor, the adsorption behavior of a hydrophobic functional organic corrosion inhibitor and its related effect on the electrochemical behavior of the reinforcing steel was investigated. In addition, this paper further discusses the effect of a hydrophobic functional organic corrosion inhibitor on pore structure and hydrophobic properties, as well as the impermeability of concrete. The results indicated that the hydrophobic functional organic corrosion inhibitor was effectively adsorbed on the surface of the steel bar, and the higher adsorption content was relevant to the higher inhibitor dosage. On one hand, the hydrophobic functional organic corrosion inhibitor exhibited both a pore-blocking effect and a hydrophobic effect on concrete, leading to a refined pore structure and reduced capillary water absorption amount; on the other hand, the hydrophobic functional organic corrosion inhibitor exhibited an excellent corrosion-inhibition effect on the reinforcement embedded in the concrete, presenting an inhibition efficiency higher than 90% with a concentration of 4 wt. %.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Controlled release of corrosion inhibitor from microwave-responsive capsules and anti-corrosion performance of steel bars

Qi Zhang,Pan Feng,Jinjie Shi,Haochuan Wang

DOI: https://doi.org/10.1016/j.corsci.2022.110572

IF: 7.72

2022-08-10

Corrosion Science

Abstract:A novel type of microwave-responsive, actively controlling capsule (ActiveCaps) is designed and prepared. In this study, ActiveCaps are used to carry corrosion inhibitors, and their controlled release behaviour is studied using ethylenediamine tetra-acetic acid (EDTA) titration in a simulated concrete pore solution. Electrochemical measurements were then performed to investigate the influence of controlled release on the anti-corrosion performance of the steel bars. The results show that ActiveCaps have a slow and sustained release behaviour, following the Peppas–Sahlin release model. Compared with the traditional direct addition method, the controlled release of the inhibitor Na 2 PO 3 F through ActiveCaps can form a thicker passive film on steel bars, and the inhibition efficiency is increased by 28.73% at 28d, indicating a higher anti-corrosion performance in the long term. This is due to the formation of Ca 5 (PO 4 ) 3 F, which serves as a protective layer covering the surface of the steel bars, precipitated by the reaction between the sustained-released Na 2 PO 3 F and Ca 2+ in solution. Thus, the utilisation efficiency of Na 2 PO 3 F is improved. The proposed novel, actively controlling technology provides a promising alternative for enhancing the durability of reinforced concrete structures using corrosion inhibitors effectively.

materials science, multidisciplinary,metallurgy & metallurgical engineering
e-Government 2015: exploring m-government scenarios, between ICT-driven experiments and citizen-centric implications

Gianluca Misuraca

DOI: https://doi.org/10.1080/09537320902750871

2009-04-01

Abstract:After introducing the challenges and failures of first generation e-government (identified as e-Gov 1.0), and the rhetoric of the next generation of e-government efforts (identified as e-Gov 2.0), this paper presents an analysis of the promises of m-government, a relatively new phenomenon whose potential is largely unknown and unexplored but is already considered by many to be the most important subset of future e-government services. Discussing some cases of m-government technologies and applications worldwide, the paper identifies a number of risks and research questions to be further elaborated. In practice, are we about to go through a major adapting societal move, partly due to information and communication technologies (ICTs) but also to other co-factors likely to influence our near future (socio-political-economic and environmental trends), or are we just passing through a natural evolution (eventually faster than others occurred in the past)? Within this particular dynamic, the paper further addresses the importance of looking at what the various emerging scenarios may be, and which ones have to be considered and eventually deployed in terms of policy-relevant and favourable cost–benefit perspectives.
Synergistic inhibition of molybdate and phytate on chloride-induced corrosion of carbon steel in simulated concrete pore solutions

Yongqi Liu,Xiangdong Guan,Jinjie Shi

DOI: https://doi.org/10.1016/j.cemconcomp.2023.105366

IF: 9.93

2024-01-01

Cement and Concrete Composites

Abstract:Improving the corrosion resistance of reinforcing steel is particularly important to prolong the service life of reinforced concrete (RC) structures. This study proposes a novel mixed corrosion inhibitor of sodium molybdate and sodium phytate to enhance the corrosion resistance of Q235 carbon steel in concrete exposed to aggressive environments. Based on the synergistic inhibition of the mixed corrosion inhibitor with an optimal concentration ratio, the passivation and chloride-induced corrosion of steel in simulated concrete pore solutions were investigated using electrochemical measurements, XPS, AFM, SEM/EDS and ATR-FTIR. The results indicated that the mixed corrosion inhibitor could promote the passivation process of steel by increasing the passive film thickness, despite no significantly improved passivation ability was highlighted for steel. Furthermore, due to the formation of a protective and thick passive film with a specific three-layer structure, the mixed corrosion inhibitor markedly improved the pitting corrosion resistance of steel and exhibited a high inhibition efficiency after 30 days of chloride exposure. Accordingly, the corresponding synergistic inhibition mechanism of the mixed corrosion inhibitor was proposed.

construction & building technology,materials science, composites
Ethanolamines corrosion inhibition effect on steel rebar in simulated realkalized concrete environments

Yunyun Tong,Jinjian Ye,Qiannan Wang,Hui Zhang,Hui Yu,Abdel-Okash Seibou

DOI: https://doi.org/10.1080/13467581.2022.2046004

IF: 0.904

2022-03-15

Journal of Asian Architecture and Building Engineering

Abstract:This paper reports the corrosion inhibition effect of the realkalization and corrosion inhibitors combination treatment on steel rebars. First, the corrosion was studied in simulated carbonated concrete and simulated realkalized concrete environments and then compared with the corrosion, while realkalization-corrosion inhibitor treatment was applied. The corrosion inhibitors studied are monoethanolamine (MEA), dimethylethanolamine (DEMA) and triethylenetetramine (TETA). Through the electrochemical measurement; the potential of steel rebars in realkalized environment containing MEA and DMEA shifted in positive direction by 84 mV and 66 mV; the current destiny of each group decreased by 3.76 and 2.33 μA/cm2, respectively. Unlike the addition of TETA shifted the potential in negative direction by 281 mV and increased the current density by 27.72 μA/cm2. Comparing steel rebars surfaces, the realkalization-corrosion inhibitors groups showed a better inhibition effect than the two control groups (simulated carbonated concrete and simulated realkalized environments). Among the corrosion inhibitors used, MEA has the best corrosion inhibition effect in the electrochemical realkalized concrete environment, it can form a protective film on the steel rebars through physical and chemical adsorption, which can effectively inhibit the corrosion of steel rebars. The result confirms that, by the combination of MEA and electrochemical realkalization, the corrosion inhibition in carbonated reinforced concrete can improve significantly.

construction & building technology
Application of Electrochemical Impedance Spectroscopy to Evaluate the Corrosion Behavior of 2304 Duplex Stainless Steel Reinforced Rebar in Concrete Exposed in Chloride-Rich Environment

Wu Zhao,Jianguo Zhao,Shengjing Zhang,Jinbo Yang,

DOI: https://doi.org/10.20964/2019.08.53

IF: 1.541

2019-08-01

International Journal of Electrochemical Science

Abstract:Corrosion of steel bars embedded in concrete is one of the main causes affecting the long-term performance of reinforced concrete structures. In this study, the corrosion behavior of AISI 2304 stainless steel reinforced calcium silicate cement concrete in chloride-rich environments were evaluated by electrochemical impedance spectroscopy (EIS). The EIS results show that both the immersion time and pH play significant roles in the evolvement of the charge transfer processes and film resistance. At pH value of 13, the total impedance increased during the 3 months of immersion time, and then it slightly reduced, indicating the protective ability is being lost. The calcium silicate concrete with steel rebar indicated that the samples remained in the passive state throughout the linear polarization resistance test. The polarization resistance value attained in the pH solutions of 13 are upper than that in other pH values which show higher capability for corrosion prevention in the pH value of 13.

electrochemistry
Research Progress in Corrosion Behavior and Anti-Corrosion Methods of Steel Rebar in Concrete

Qiuyue Wang,Zilong Wang,Chengtao Li,Xinglong Qiao,Hao Guan,Zhou Zhou,Dan Song

DOI: https://doi.org/10.3390/met14080862

IF: 2.695

2024-07-27

Metals

Abstract:The corrosion of steel rebars is a prevalent factor leading to the diminished durability of reinforced concrete structures, posing a significant challenge to the safety of structural engineering. To tackle this issue, extensive research has been conducted, yielding a variety of theoretical insights and remedial measures. This review paper offers an exhaustive analysis of the passivation processes and corrosion mechanisms affecting steel rebars in reinforced concrete. It identifies key factors such as chloride ion penetration and concrete carbonization that primarily influence rebar corrosion. Furthermore, this paper discusses a suite of strategies designed to enhance the longevity of reinforced concrete structures. These include improving the concrete protective layer's quality and bolstering the rebars' corrosion resistance. As corrosion testing is essential for evaluating steel rebars' resistance, this paper also details natural and accelerated corrosion testing methods applicable to rebars in concrete environments. Additionally, this paper deeply presents an exploration of the use of X-ray computed tomography (X-CT) technology for analyzing the corrosion byproducts and the interface characteristics of steel bars. Recognizing the close relationship between steel bar corrosion research and microstructural properties, this paper highlights the pivotal role of X-CT in advancing this field of study. In conclusion, this paper synthesizes the current state of knowledge and provides a prospective outlook on future research directions on the corrosion of steel rebars within reinforced concrete structures.

materials science, multidisciplinary,metallurgy & metallurgical engineering

[Calcified gastric cancer: traditional study, CT and differential diagnosis].

The Electrochemical Characterization of Rebar Passivation Film in Simulated Concrete Media

Anticorrosion Performance and Field Application of a New Rebar Inhibitor

Effectiveness Protection Performance of an Internal Blending Organic Corrosion Inhibitor for Carbon Steel in Chloride Contaminated Simulated Concrete Pore Solution

Bidirectional Electromigration of A Corrosion Inhibitor in Chloride Contaminated Concrete

Rust Prevention Property of a New Organic Inhibitor under Different Conditions

Development of Migrating Corrosion Inhibitor in Reinforced Concrete

Characteristics, interventions, and outcomes of misdiagnosed delirium in cancer patients

Analysis of Polarization Curves Characteristics of Rebar in Concrete

1-Benzyl-4-Phenyl-1H-1,2,3-Triazole as a Green Corrosion Inhibitor for Carbon Steel Reinforcing Bars in Concrete Elements

Investigation on the Effect of Corrosion-Inhibiting-waterproofing Compacting Agent on Inhibiting Corrosion

Study of Wiring Method on Accelerated Corrosion of Steel Bars in Concrete

Influence of Threshold Chloride Concentration on Corrosion Behavior of Low-Alloy Steel Rebar in Concrete Pore Solutions

Corrosion Behaviors of Tetrasodium Iminodisuccinate (IDS) as an Environmentally Friendly Inhibitor: Experimental and Theoretical Studies

Inhibition Effect of Hydrophobic Functional Organic Corrosion Inhibitor in Reinforced Concrete

Controlled release of corrosion inhibitor from microwave-responsive capsules and anti-corrosion performance of steel bars

e-Government 2015: exploring m-government scenarios, between ICT-driven experiments and citizen-centric implications

Synergistic inhibition of molybdate and phytate on chloride-induced corrosion of carbon steel in simulated concrete pore solutions

Ethanolamines corrosion inhibition effect on steel rebar in simulated realkalized concrete environments

Application of Electrochemical Impedance Spectroscopy to Evaluate the Corrosion Behavior of 2304 Duplex Stainless Steel Reinforced Rebar in Concrete Exposed in Chloride-Rich Environment

Research Progress in Corrosion Behavior and Anti-Corrosion Methods of Steel Rebar in Concrete