[A clinical observation on changes in oral-habit incidence].

T. Abe,K. Matsuzaki,M. Yakushiji,Y. Machida

Abstract:

What problem does this paper attempt to address?

Coupling Microbial Fuel Cell and Hydroponic System for Electricity Generation, Organic Removal, and Nutrient Recovery via Plant Production from Wastewater

N. Evelin Paucar,Chikashi Sato

DOI: https://doi.org/10.3390/en15239211

IF: 3.2

2022-12-06

Energies

Abstract:The world is predicted to face serious threats from the depletion of non-renewable energy resources, freshwater shortage, and food scarcity. Microbial fuel cells (MFCs) are innovative bio-electrochemical devices capable of directly converting chemical energy into electrical energy using microorganisms as a catalyst. This ability has been explored for generating electricity using wastewater as an energy source, while simultaneously treating wastewater. On the other hand, hydroponics is the cultivation of plants in water without soil. The goal of this study was to develop a novel integrated microbial fuel cell-hydroponic system (MFC-Hyp system) that possesses the ability to concurrently generate electricity while degrading organic pollutants (Chemical oxygen demand, COD) in wastewater, remove and recover nutrients (phosphorus, P and nitrogen, N) from the wastewater, and produce edible plants. The MFC-Hyp system developed in this study produced a power density of 250.7 mW/m2. The power density increased by approximately 19% and the phosphorus recovery increased to 7.5% in the presence of Allium tuberosum compared to 4.9% without the plant (e.g., in the control). The removal efficiencies of nitrate, phosphate, and COD are 32%, 11%, and 80%, respectively. The results indicate that the novel integrated MFC-Hyp system can remove COD from wastewater, generate electricity using wastewater as an energy source, and utilize nutrients for growing plants; however, this system requires further improvement for field implementation.

energy & fuels
Self-sustaining Advanced Wastewater Purification and Simultaneous in Situ Nutrient Recovery in a Novel Bioelectrochemical System

Xi Chen,Han Zhou,Kuichang Zuo,Yue Zhou,Qiuying Wang,Dongya Sun,Yifan Gao,Peng Liang,Xiaoyuan Zhang,Zhiyong Jason Ren,Xia Huang

DOI: https://doi.org/10.1016/j.cej.2017.07.130

IF: 15.1

2017-01-01

Chemical Engineering Journal

Abstract:Wastewater containing abundant organics and nutrient resources requires large energy input in conventional treatment technologies to reach the discharge standard and/or to recover nutrient resources. This study presents a self-sustaining advanced wastewater purification and in situ nutrient recovery process accomplished by a newly designed 10-liter-scale bioelectrochemical system containing membrane stack configuration, which was called an advanced microbial nutrient recovery cell (AMNRC). After subsequent treatments in the AMNRC's anode, cathode and stacked desalination chambers, all the removals of organics and nutrient in the domestic wastewater were achieved higher than 95%, which represented < 24.9 mg/L of chemical oxygen demand,< 14.2 mg/L of total nitrogen (TN), < 6.5 mg/L of ammonium nitrogen (NH4+-N), and < 0.49 mg/L of total phosphorus (TP) were left in the final effluent. Three sequential treatment processes including anaerobic microbial degradation, aerobic microbial treatment, and electrical ion migration comprehensively facilitated the above removals. Meanwhile TN, NH4+-N and TP were concentrated in the recovery solution by 260%, 150%, and 490%, respectively. Ammonium and phosphate were then recovered as struvite during crystallization. The AMNRC was proved as an energy neutral approach to efficiently purify wastewater and simultaneously recover nutrient, the treatment processes were driven by the energy extracted from wastewater itself.
Novel Self-driven Microbial Nutrient Recovery Cell with Simultaneous Wastewater Purification

Xi Chen,Dongya Sun,Xiaoyuan Zhang,Peng Liang,Xia Huang

DOI: https://doi.org/10.1038/srep15744

IF: 4.6

2015-01-01

Scientific Reports

Abstract:Conventional wastewater purification technologies consume large amounts of energy, while the abundant chemical energy and nutrient resources contained in sewage are wasted in such treatment processes. A microbial nutrient recovery cell (MNRC) has been developed to take advantage of the energy contained in wastewater, in order to simultaneously purify wastewater and recover nutrient ions. When wastewater was circulated between the anode and cathode chambers of the MNRC, the organics (COD) were removed by bacteria while ammonium and phosphate (NH 4 + -N and PO 4 3− -P) were recovered by the electrical field that was produced using in situ energy in the wastewater without additional energy input. The removal efficiencies from wastewater were >82% for COD, >96% for NH 4 + -N and >64% for PO 4 3− -P in all the operational cycles. Simultaneously, the concentrations of NH 4 + and PO 4 3− in the recovery chamber increased to more than 1.5 and 2.2 times, respectively, compared with the initial concentrations in wastewater. The MNRC provides proof-of-concept as a sustainable, self-driven approach to efficient wastewater purification and nutrient recovery in a comprehensive bioelectrochemical system.
Energy recovery efficiency of Low Cost Microbial Fuel Cell using Domestic Wastewater

Vishnupavya Umasankar,Danyaa Manjai V Mohan,Vishvapriya kalaivanan,Deepika sree Krishnakumar,Vasudevan Mangottiri,Geethamani Ramaswamy

DOI: https://doi.org/10.1088/1757-899X/955/1/012099

2020-11-21

IOP Conference Series: Materials Science and Engineering

Abstract:Microbial fuel cell is one of the emerging technologies which utilize wastewater to generate electricity with the help of action of microorganisms. The real interest in microbial fuel cells has tremendously grown in recent years. It converts chemical reaction into electrical energy and helps in the recovery of energy from wastewater. The main objective of this study was to enhance the electricity production and simultaneously treat the wastewater. The lab scale model consists of double chamber microbial fuel cell, i.e., two separate chambers one with salt water and the other with wastewater representing anode and cathode, a salt bridge acting as proton exchange membrane; electrodes from batteries are used for this study. In this, the proton exchange and electron transfer occurs after the redox reaction. The microbes in the sludge or wastewater are responsible for the release of electrons. These electrons tend to move through the external circuit, producing electricity. For maintaining electrical neutrality salt bridge is used. The dual chamber microbial fuel cell used in this experiment produced an average voltage of 0.37mv for a wastewater volume of one liter. This set up is done on small scale, but with further and more detailed study it can be installed in industries that produce Microbial Waste water as a by-product to generate electricity and reuse the waste water for other processes after treatment.
Transformation from biofiltration unit to hybrid constructed wetland-microbial fuel cell: Improvement of wastewater treatment performance and energy recovery

Tean-Peng Teoh,Chong-Jing Koo,Li-Ngee Ho,Yee-Shian Wong,Nabilah Aminah Lutpi,Sing-Mei Tan,Kea-Lee Yap,Soon-An Ong

DOI: https://doi.org/10.1007/s11356-023-26789-6

Abstract:This study aimed to compare the performance of biofiltration, constructed wetland, and constructed wetland microbial fuel cell (CW-MFC). The transformation from a biofiltration unit to a hybrid CW-MFC was demonstrated with the advantages of improvement of wastewater treatment while generating electricity simultaneously. The introduction of plants to the upper region of the bioreactor enhanced the DO level by 0.8 mg/L, ammonium removal by 5 %, and COD removal by 1 %. The integration of electrodes and external circuits stimulated the degradation rate of organic matter in the anodic region (1 % without aeration and 3 % with aeration) and produced 5.13 mW/m3 of maximum power density. Artificial aeration improved the nitrification efficiency by 38 % and further removed the residual COD to an efficiency of 99 %. The maximum power density was also increased by 3.2 times (16.71 mW/m3) with the aid of aeration. In treating higher organic loading wastewater (3M), the maximum power density showed a significant increment to 78.01 mW/m3 (4.6-fold) and the COD removal efficiency was 98 %. The ohmic overpotential dominated the proportion of total loss (67-91 %), which could be ascribed to the low ionic conductivity. The reduction in activation and concentration loss contributed to the lower internal resistance with the additional aeration and higher organic loading. Overall, the transformation from biofiltration to a hybrid CW-MFC system is worthwhile since the systems quite resemble while CW-MFC could improve the wastewater treatment as well as recover energy from the treated wastewater.
Multi-anode enhanced the bioelectricity generation in air-cathode microbial fuel cells towards energy self-sustaining wastewater treatment

Li Xie,Fumichika Tanaka,Toshiyuki Yagi,Hideaki Hashimoto,Kyo Ikeru,Takashi Igarashi,Hiroaki Kobayashi,Mitsuhiro Sakoda,Naoko Yoshida

DOI: https://doi.org/10.1016/j.envres.2023.117744

2024-02-15

Abstract:Microbial fuel cells (MFCs) hold considerable promise for harnessing the substantial energy resources present in wastewater. However, their practical application in wastewater treatment is limited by inadequate removal of organic matter and inefficient power recovery. Previous studies have investigated aeration as a method to enhance the removal of organic matter, but this method is energy-intensive. To address this issue, this study proposed using MFC-recovered bioelectricity for aeration, thereby mitigating the associated expenses. An air-cathode MFC with multi-anode was constructed and optimized to maximize electricity supply for aeration. Carbon-felt anodes were chosen as the most effective anode configuration, due to the high abundance of electroactive bacteria and genes observed in the biofilm generated on their surface. By incorporating six carbon felt anodes, the MFC achieved a 1.7 and 1.1 fold enhancement in the maximum power and current density, respectively. The optimized MFC unit achieved a stable current density of 0.32 A/m2 and achieved COD removal of 60% in the long-term operation of 140 days in a 50 L reactor. In a reactor scaled up to 1600 L, 72 MFCs successfully powered a mini air pump work for 10 s after an 81-s charging period. The intermittent aeration resulted in partial increases in DO concentrations to 0.03-3.5 mg/L, which is expected to promote the removal of nitrogen compounds by the nitrification-anammox process. These groundbreaking results lay the foundation for self-sustaining wastewater treatment technologies.
Enhanced bioenergy recovery by innovative application of chia seeds nanopowder for anode modification in microbial fuel cell treating hospital wastewater

Waad M.A. Abbas,Zainab Z. Ismail

DOI: https://doi.org/10.1080/09593330.2024.2432481

IF: 3.475

2024-12-01

Environmental Technology

Abstract:Microbial fuel cells (MFCs) are new bioelectrochemical techniques for conversion of organic waste materials into energy depending on the metabolic activity of the anodic biofilm, which acts as the biocatalyst in the anode compartment. Hence, the anode material is a priority for better growth of bacterial species and electrical conductivity as well. In this study, an innovative application of Chia seeds nanopowder (CSNP) was carried out for the first time with acid-activated multiwall carbon nanotubes (functionalised MWCNTs) for anode nanomodification by overlaying the surfaces of the graphite anodes (GA) in MFCs fuelled with real hospital wastewater (HWW). Two tubular-enclosed dual-chamber MFCs were constructed, setup and operated in a continuous mode for 3 months. MFC1 was assembled with CSNP/MWCNTs-GA, whereby MFC2 was assembled with MWCNTs-GA. The results revealed higher power output up to 2202.73 mW/m 3 observed in MFC1 compared to 1271.57 mW/m 3 in MFC2. The efficiencies of organic content (COD) removal were 86.1% and 82.9% obtained in MFC1 and MFC2, respectively. Although both efficiencies of COD removal were relatively comparable, however, a remarkable increase in COD removal efficiency was achieved in MFC1. These observations indicated the potential role of CSNP for enhancing the biofilm growth and increasing the electrode conductivity.

environmental sciences
Optimization of microbial fuel cell process using a novel consortium for aromatic hydrocarbon bioremediation and bioelectricity generation

Anwesha Mukherjee,Purvi Zaveri,Rushika Patel,Manisha T Shah,Nasreen S Munshi

DOI: https://doi.org/10.1016/j.jenvman.2021.113546

2021-11-15

Abstract:Microbial Fuel Cell (MFC) is an innovative bio-electrochemical approach which converts biochemical energy inherent in wastewater into electrical energy, thus contributing to circular economy. Five electrogenic bacteria, Kocuria rosea (GTPAS76), two strains of Bacillus circulans (GTPO28 and GTPAS54), and two strains of Corynebacterium vitaeruminis (GTPO38 and GTPO42) were isolated from a common effluent treatment plant (CETP) and were used individually as well as in consortium form to run double chambered "H" type microbial fuel cell. Individually they could produce voltage in the range of 0.4-0.7 V in the MFC systems. Consortium developed using GTPO28, GTPO38, GTPAS54 and GTPAS76 were capable of producing voltage output of 0.8 V with 81.81 % and 64 % COD and BOD reduction, respectively. The EPS production capacity and electricity generation by the isolated bacteria correlated significantly (r = 0.72). Various parameters like, effect of preformed biofilm, length of salt bridge and its reuse, aeration, substrate concentration and external resistance were studied in detail. The study emphasizes on improving the commercialization aspect of MFC with repeated use of salt bridge and improving wastewater treatment potential after optimization of MFC system. Polarization curve and power density trends were studied in optimized MFC. A maximum power density and current density achieved were 18.15 mW/m2 and 370.37 mA/m2, respectively using 5 mM sodium benzoate. This study reports the use of sodium benzoate as a substrate along with reusing of the salt bridge in MFC study with promising results for BOD and COD reduction, proving it to be futuristic technology for bio-based circular ecosystem development.
Microbial nutrient recovery cell as an efficient and sustainable nutrient recovery option in sewage treatment

Ayushman Bhattacharya,Margret Neena,Pritha Chatterjee

DOI: https://doi.org/10.1016/j.jenvman.2024.121753

Abstract:Globally, nutrient pollution is a serious and challenging concern. Wastewater treatment plants (WWTPs) are designed to prevent the discharge of contaminants resulting from anthropogenic sources to the receiving water bodies. In this study, seasonal nutrient pollution load, and biological nutrient removal efficiency of an anoxic aerobic unit based WWTP were investigated. Seasonal assessment revealed that the average total nitrogen removal efficiency and total phosphorus removal efficiency of the WWTP do not meet the discharge standard of 10 mg/L and 1 mg/L, respectively. Furthermore, the WWTP does not utilize the energy contained in the wastewater. In this regard, dual chamber MFC (D-MFC) has emerged as a promising solution that can not only treat wastewater but can also convert chemical energy present in the wastewater into electrical energy. However, higher N O3- (57 ± 4 mg/L) and P-P O43- (6 ± 0.52 mg/L) concentration in cathodic effluent is a major drawback in D-MFC. Therefore, to solve this issue, D-MFC was transformed into a microbial nutrient recovery cell (MNRC) which demonstrated a final N H4+-N and P-P O43- concentration of nearly 1 mg/L with N H4+-N and P-P O43- recovery up to 74 % and 69 %, respectively in the recovery chamber. Besides, MNRC attained a maximum power density of 307 mW/m3 and a current density of 1614 mA/m3, thus indicating MNRC is an eco-friendly, energy-neutral, and promising technology for electricity generation and recovering nutrients.
Electrified Nutrient Recovery at Municipal Wastewater Facilities: Sampling, Screening and Multivariate Analyses

Damilola Daramola,Jason Trembly,Kody Wolfe,Rida Benhaddou,Asad Abbas,Sana Heydarian,Lawrence Ajayi

DOI: https://doi.org/10.26434/chemrxiv-2024-gwpw5

2024-08-08

Abstract:Municipal wastewater facilities can contain recycle streams with high nutrient content, that both increase the overall energy consumption in the facility and cause environmental pollution when not properly handled. Reducing the nutrient load of these streams through recovery is a promising solution that enhances the Food-Energy-Water nexus by producing sustainable fertilizer. In this study, the potential for nutrient recovery at municipal wastewater facilities was investigated through a 1-year sampling of nutrient, ionic, organic and heavy metal composition of three wastewater streams influent to or effluent from two types of digesters. Subsequently, electrochemical nutrient recovery was evaluated for these streams through multivariate screening of three groups of variables – operational, stream and design – and the effect of these variables on optimal nutrient recovery in the form of phosphorus. Results showed that Orthophosphate (Ortho-P) and ammonia concentrations do not show significant correlation in any tested streams. On the other hand, major ions exhibited interdependence with Ortho-P concentration, while the stream pH was found to correlate with Ortho-P and Cl- in the anaerobic digester effluent. Screening analyses identified 5 – anode type, cathodic potential, initial P concentration, initial NH4+ concentration and temperature – of the 11 variables evaluated were the variables that most significantly affected P recovery efficiency and specific energy consumed during this recovery. Finally, the optimum conditions for high phosphorus recovery and low energy consumption from the anaerobic digester effluent during a 2-hour experiment were a cathodic potential of -0.805 V vs Ag/AgClsat, an electrode area to electrolyte volume ratio of 0.145 1/cm, and a temperature of 41.3°C, with a solid product that was predominantly struvite. Overall, the demonstrated 95% P recovery efficiency and 0.03 kWh/kg P are characteristic of an emerging process that could be competitive at scale with state-of-the-art synthetic nutrient routes, if applied to the right stream.

Chemistry
Performance evaluation of a microbial fuel cell for resource recovery as struvite and bioelectricity generation from slaughterhouse wastewater

C Sreelakshmi,S Kiruthika,R Jeyalakshmi

DOI: https://doi.org/10.1002/jctb.7660

IF: 3.709

2024-04-26

Journal of Chemical Technology & Biotechnology

Abstract:Background Microbial fuel cell, a potential cost‐effective technology for the energy neutral treatment of wastewater. However, the successful implementation of this technology in resource recovery is still limited. In this study, a microbial electrochemical cell was designed and operated for 30 days. The critical factors assessed for removal and recovery of N and P as struvite from wastewater. Results The optimization studies on critical factors like the chemical oxygen demand of wastewater (500–2000 mg/L) and cathode aeration rate (45–135 mL/min) were conducted using the pure culture of Escherichia coli. The system yielded an average power densityof 465 mW/m2, average current density of 915 mA/m2 and P recovery at an extent of 40% as struvite. Additionally the maximum reduction in the COD of 90% with an average coulombic efficiency of about 82% was obtained at a short interval of 30 days. The solubility studies of the recovered struvite for 12 h. at different pH from 4.5 to 9 showed maximum solubility of 80% at 4.5 and minimum of 3.5% at 9. Conclusion This study moves one step closer to applying MFC technology for N and P‐rich wastewater treatment with concurrent struvite precipitation and electricity production. In this way, Sustainable Development Goals 2, 6, and 7 can be achieved through resource recovery, clean water, and bioenergy. This article is protected by copyright. All rights reserved.

engineering, chemical,biotechnology & applied microbiology, environmental,chemistry, multidisciplinary
Microbial approach towards anode biofilm engineering enhances extracellular electron transfer for bioenergy production

Anwar Ahmad,Alia Said Al Senaidi,Mohammad S Mubarak

DOI: https://doi.org/10.1016/j.jenvman.2024.122696

Abstract:Applying microbial electrolysis cells (MEC) is a biological approach to enhance the growth of high amounts of electroactive biofilm for extracellular electron transfer. The electroactive biofilm degrades the organics by oxidizing them at the anode and producing electrical energy. Addition of waste-activated sludge (WAS) with fat grease oil (FOG) produces an optimal reactor environment for microbial growth to enhance the exchange of electrons between cells via microbial electrolysis. The present work aimed to investigate the microbial approach to increase the extracellular electron transfer (EET) in microbial electrolysis cells. Results revealed that metabolites in electroactive microbes (EAM) grow viable cells that initiate high EET at anode sites. At optimum WAS with FOG addition, volatile fatty acid and current generation yield production was 2.94 ± 0.19 g/L and 17.91 ± 7.23 mA, accompanied by COD removal efficiency of 89.5 ± 14.4%, respectively. This study introduces a novel approach to anode biofilm engineering that significantly enhances extracellular electron transfer, offering a fresh perspective on bioenergy production. Our approach, which demonstrates that anodic biofilm enhances intercellular electron transfer, increases NADH-NAD ratio, and increases metabolite yield-fluxes, has the potential to revolutionize bio-electricity production. Results indicated that the electrolysis highlights MEC performance in power generation of 788 mV with 200 mL of anode volume of active viable cells by utilizing WAS with 11% FOG. The achievements of this study provide critical parameters for the anode biofilm engineering, demonstrating how growth cell volume, intercellular electron transfer, and increases in NADH-NAD ratio are evidence of an increase in the EET, compelling evidence for the resilience treatment and efficient current production. These findings are significant in advancing our understanding of bioenergy production.
Microbial network for waste activated sludge cascade utilization in an integrated system of microbial electrolysis and anaerobic fermentation

Wenzong Liu,Zhangwei He,Chunxue Yang,Aijuan Zhou,Zechong Guo,Bin Liang,Cristiano Varrone,Ai-Jie Wang

DOI: https://doi.org/10.1186/s13068-016-0493-2

2016-04-02

Abstract:Background: Bioelectrochemical systems have been considered a promising novel technology that shows an enhanced energy recovery, as well as generation of value-added products. A number of recent studies suggested that an enhancement of carbon conversion and biogas production can be achieved in an integrated system of microbial electrolysis cell (MEC) and anaerobic digestion (AD) for waste activated sludge (WAS). Microbial communities in integrated system would build a thorough energetic and metabolic interaction network regarding fermentation communities and electrode respiring communities. The characterization of integrated community structure and community shifts is not well understood, however, it starts to attract interest of scientists and engineers. Results: In the present work, energy recovery and WAS conversion are comprehensively affected by typical pretreated biosolid characteristics. We investigated the interaction of fermentation communities and electrode respiring communities in an integrated system of WAS fermentation and MEC for hydrogen recovery. A high energy recovery was achieved in the MECs feeding WAS fermentation liquid through alkaline pretreatment. Some anaerobes belonging to Firmicutes (Acetoanaerobium, Acetobacterium, and Fusibacter) showed synergistic relationship with exoelectrogens in the degradation of complex organic matter or recycling of MEC products (H2). High protein and polysaccharide but low fatty acid content led to the dominance of Proteiniclasticum and Parabacteroides, which showed a delayed contribution to the extracellular electron transport leading to a slow cascade utilization of WAS. Conclusions: Efficient pretreatment could supply more short-chain fatty acids and higher conductivities in the fermentative liquid, which facilitated mass transfer in anodic biofilm. The overall performance of WAS cascade utilization was substantially related to the microbial community structures, which in turn depended on the initial pretreatment to enhance WAS fermentation. It is worth noting that species in AD and MEC communities are able to build complex networks of interaction, which have not been sufficiently studied so far. It is therefore important to understand how choosing operational parameters can influence reactor performances. The current study highlights the interaction of fermentative bacteria and exoelectrogens in the integrated system.
(Invited) Bioelectrochemical Systems for Resource Recovery and H2 Production from Wastewater

Xiuping Zhu,Sidan Lu

DOI: https://doi.org/10.1149/ma2021-0223767mtgabs

2021-01-01

ECS Meeting Abstracts

Abstract:Wastewaters contain abundant nutrients and energy, which can be recovered by using proper bioelectrochemical systems. We developed a three-chamber resource recovery microbial fuel cell (RRMFC) to treat synthetic urine-containing wastewater with various organic pollutants and simultaneously recover nutrients (e.g., N, P, and S). Over one cycle (∼3 days), 99% of urea, 97% of COD, 99% of histidine, 91% of creatinine, 99% of sodium acetate, 98% of SO42−, and 99% of PO43− were removed from the wastewater, and simultaneously 42% of total nitrogen, 37% of PO43−, 59% of SO42−, and 33% of total salts were recovered from the wastewater. We also developed a solar microbial electrolysis cell (solar-MEC) with a Fe2O3 photoanode, a bioanode, and a black-silicon (b-Si) photocathode for H2 production from wastewater without external bias. The solar-MEC had a maximum current density of 0.8 mA/cm2 and an average H2 production rate of 5.1 µmol/h/cm2 under one sun irradiation.
Nutrients recovery by coupled bioreactor of heterotrophic ammonia assimilation and microbial fuel cell in saline wastewater

Chuanfu Zhao,Tong Jiao,Wenhao Zhang,Wenchao Zhang,Man Jia,Sheng Liu,Mengru Zhang,Fei Han,Yufei Han,Jianhua Lei,Xianfeng Wang,Weizhi Zhou

DOI: https://doi.org/10.1016/j.scitotenv.2024.170697

2024-03-01

Abstract:Heterotrophic ammonia assimilation (HAA) process had been widely used in the treatment of high salt wastewater, but the electro enhanced coupling process and electron transfer process were rarely studied. In this study, a HAA process coupled microbial fuel cell (MFC) system was established to treat ammonia-containing wastewater under increasing salinity to achieve nitrogen recovery and electricity generation. Up to 95.4 % NH4+-N and 96.4 % COD removal efficiencies were achieved at 2 % salinity in HAA-MFC. The maximum power density and current density at 2 % salinity were 29.93 mW/m2 and 182.37 mA/m2, respectively. The residual organic matter in the cathode effluent was effectively removed by the anode. The increase of salinity not only enhanced the sludge settling performance and activity, but also promoted the enzyme activity and amino acid production of the ammonia assimilation pathway. Marinobacter and Halomonas were gradually enriched at the anode and cathode with increased salinity to promote ammonia assimilation and electron production. This research offered a promising solution to overcome salinity-related challenges in wastewater treatment and resource recovery.

environmental sciences
A novel approach to recycle bacterial culture waste for fermentation reuse via a microbial fuel cell-membrane bioreactor system

Jian Li,Yuan Zhu,Liangpeng Zhuang,Yuichiro Otsuka,Masaya Nakamura,Barry Goodell,Tomonori Sonoki,Zhen He

DOI: https://doi.org/10.1007/s00449-015-1420-9

IF: 3.434

2015-05-27

Bioprocess and Biosystems Engineering

Abstract:Biochemical production processes require water and nutrient resources for culture media preparation, but aqueous waste is generated after the target products are extracted. In this study, culture waste (including cells) produced from a lab-scale fermenter was fed into a microbial fuel cell-membrane bioreactor (MFC-MBR) system. Electrical energy was generated via the interaction between the microbial consortia and the solid electrode in the MFC. The treated wastewater was reclaimed in this process which was reused as a solvent and a nutrient source in subsequent fermentation. Polarization testing showed that the MFC produced a maximum current density of 37.53 A m−3 with a maximum power density of 5.49 W m−3. The MFC was able to generate 0.04 kWh of energy per cubic meter of culture waste treated. The lab-scale fermenters containing pure cultures of an engineered Pseudomonas spp. were used to generate 2-pyrone-4,6-dicarboxylic acid (PDC), a high value platform chemical. When the MFC-MBR-treated wastewater was used for the fermenter culture medium, a specific bacterial growth rate of 1.00 ± 0.05 h−1 was obtained with a PDC production rate of 708.11 ± 64.70 mg PDC L−1 h−1. Comparable values for controls using pure water were 0.95 ± 0.06 h−1 and 621.01 ± 22.09 mg PDC L−1 h−1 (P > 0.05), respectively. The results provide insight on a new approach for more sustainable bio-material production while at the same time generating energy, and suggest that the treated wastewater can be used as a solvent and a nutrient source for the fermentation production of high value platform chemicals.

engineering, chemical,biotechnology & applied microbiology
An insight on energy production using microbial fuel cell: A microbiological perspective and electron transfer improvement

Priya Dharshini Palanivel,Samsudeen Naina Mohamed,Gunda Mohanakrishna,Srinithya Ravinuthala,S Saravanan

DOI: https://doi.org/10.1002/jctb.7788

IF: 3.709

2024-11-30

Journal of Chemical Technology & Biotechnology

Abstract:Microbial fuel cells (MFCs) are sustainable energy technologies that could resolve pollution challenges brought by various activities. It can meet energy demand by producing bioelectricity through catabolizing organic matter. Over the past two decades, research on many microbes have been used in MFCs, which intrigued researchers to explore the underlying electron transfer mechanism between microbe and anode. Electron transfer between electrode and microorganism occurs via different pathways: direct, indirect electron transfer and interspecies electron transfer. Shewanella and Geobacter are well‐known for microbe–electrode and microbe–microbe electron transfer. This review provides an overview of the significant varieties of microbes utilized in MFCs for simultaneous bioelectricity generation and wastewater treatment. Mechanisms of different modes of electron transfer involved during the oxidation of organic wastes in the anode section of MFCs are highlighted. Furthermore, this review also details some of the techniques to promote extracellular electron transfer efficiency which is important for the enhanced performance of MFC in terms of power, current generation and wastewater remediation. A perspective of challenges to be addressed for the effective functioning of these technologies, opportunities for MFC systems to be scaled up and associated techno‐economic analysis are discussed. © 2024 Society of Chemical Industry (SCI).

engineering, chemical,biotechnology & applied microbiology, environmental,chemistry, multidisciplinary
Advancements in Bioelectricity Generation Through Nanomaterial-Modified Anode Electrodes in Microbial Fuel Cells

Yilkal Dessie,Sisay Tadesse

DOI: https://doi.org/10.3389/fnano.2022.876014

2022-05-17

Frontiers in Nanotechnology

Abstract:The use of nanotechnology in bioelectrochemical systems to recover bioelectricity and metals from waste appears to be a potentially appealing alternative to existing established procedures. This trend exactly characterizes the current renewable energy production technology. Hence, this review focuses on the improvement of the anode electrode by using different functional metal oxide-conducting polymer nanocomposites to enhance microbial fuel cell (MFC) performance. Enhancement of interfacial bioelectrocatalysis between electroactive microorganisms and hierarchical porous nanocomposite materials could enhance cost-effective bioanode materials with superior bioelectrocatalytic activity for MFCs. In this review, improvement in efficiency of MFCs by using iron oxide- and manganese oxide-based polypyrrole hybrid composites as model anode modifiers was discussed. The review also extended to discussing and covering the principles, components, power density, current density, and removal efficiencies of biofuel cell systems. In addition, this research review demonstrates the application of MFCs for renewable energy generation, wastewater treatment, and metal recovery. This is due to having their own unique working principle under mild conditions and using renewable biodegradable organic matter as a direct fuel source.
Integrated chamber-free microbial fuel cell for wastewater purification and bioenergy generation

Peng Chen,Taotao Zhang,Yahui Chen,Haitao Ma,Yu Wang,Wei Liu,Yao Wang,Guangwu Zhou,Renwei Qing,Yun Zhao,Heng Xu,Likai Hao,Can Wang,Fei Xu

DOI: https://doi.org/10.1016/j.cej.2022.136091

IF: 15.1

2022-08-01

Chemical Engineering Journal

Abstract:An integrated chamber-free microbial fuel cell (iMFC) was constructed, which can be directly used for wastewater purification and energy recovery. The iMFC demonstrated potential electricity generating ability, producing 123.02 mW m−2 (688.90 mW m−3) with an open-circuit voltage of 0.75 V and current discharge of 294.32 mAh. Cyclic voltammetry analysis indicated that the electricity storage capacity contributed by pseudocapacitance effect enhanced power generation of iMFC. Electrochemical impedance analysis revealed a low internal resistance (60.20 Ω), mainly related to internal diffusion. In addition, iMFC had an excellent chemical oxygen demand (COD) removal capacity, removing 81.20% of wastewater COD in 48 h, with optimum coulombic efficiency of 23.07%. The high-throughput sequencing analysis (16S rRNA/16S rDNA) indicated that Comamonas, Delftia, and Flavobacterium were dominant on both anode and cathode with varying abundance. Additionally, Pseudomonas and Clostridium_sensu_stricto_13 contributed as important exoelectrogens. With concise architecture, the iMFC could be easily integrated and used in existing wastewater treatment plants without further construction, making it feasible for industrial application.

engineering, chemical, environmental
Synergistic advancements in sewage-driven microbial fuel cells: novel carbon nanotube cathodes and biomass-derived anodes for efficient renewable energy generation and wastewater treatment

Nasser A. M. Barakat,Shimaa Gamal,Hak Yong Kim,Nasser M. Abd El-Salam,Hassan Fouad,Olfat A. Fadali,Hager M. Moustafa,Omina H. Abdelraheem

DOI: https://doi.org/10.3389/fchem.2023.1286572

IF: 5.5

2023-11-24

Frontiers in Chemistry

Abstract:Microbial fuel cells (MFCs) offer a dual solution of generating electrical energy from organic pollutants-laden wastewater while treating it. This study focuses on enhancing MFC performance through innovative electrode design. Three-dimensional (3D) anodes, created from corncobs and mango seeds via controlled graphitization, achieved remarkable power densities. The newly developed electrode configurations were evaluated within sewage wastewater-driven MFCs without the introduction of external microorganisms or prior treatment of the wastewater. At 1,000°C and 1,100°C graphitization temperatures, corncob and mango seed anodes produced 1,963 and 2,171 mW/m 2 , respectively, nearly 20 times higher than conventional carbon cloth and paper anodes. An advanced cathode composed of an activated carbon-carbon nanotube composite was introduced, rivaling expensive platinum-based cathodes. By optimizing the thermal treatment temperature and carbon nanotube content of the proposed cathode, comparable or superior performance to standard Pt/C commercial cathodes was achieved. Specifically, MFCs assembled with corncob anode with the proposed and standard Pt/C cathodes reached power densities of 1,963.1 and 2,178.6 mW/m 2 , respectively. Similarly, when utilizing graphitized mango seeds at 1,100°C, power densities of 2,171 and 2,151 mW/m 2 were achieved for the new and standard cathodes, respectively. Furthermore, in continuous operation with a flow rate of 2 L/h, impressive chemical oxygen demand (COD) removal rates of 77% and 85% were achieved with corncob and mango seed anodes, respectively. This work highlights the significance of electrode design for enhancing MFC efficiency in electricity generation and wastewater treatment.

chemistry, multidisciplinary

[A clinical observation on changes in oral-habit incidence].

Coupling Microbial Fuel Cell and Hydroponic System for Electricity Generation, Organic Removal, and Nutrient Recovery via Plant Production from Wastewater

Self-sustaining Advanced Wastewater Purification and Simultaneous in Situ Nutrient Recovery in a Novel Bioelectrochemical System

Novel Self-driven Microbial Nutrient Recovery Cell with Simultaneous Wastewater Purification

Energy recovery efficiency of Low Cost Microbial Fuel Cell using Domestic Wastewater

Transformation from biofiltration unit to hybrid constructed wetland-microbial fuel cell: Improvement of wastewater treatment performance and energy recovery

Multi-anode enhanced the bioelectricity generation in air-cathode microbial fuel cells towards energy self-sustaining wastewater treatment

Enhanced bioenergy recovery by innovative application of chia seeds nanopowder for anode modification in microbial fuel cell treating hospital wastewater

Optimization of microbial fuel cell process using a novel consortium for aromatic hydrocarbon bioremediation and bioelectricity generation

Microbial nutrient recovery cell as an efficient and sustainable nutrient recovery option in sewage treatment

Electrified Nutrient Recovery at Municipal Wastewater Facilities: Sampling, Screening and Multivariate Analyses

Performance evaluation of a microbial fuel cell for resource recovery as struvite and bioelectricity generation from slaughterhouse wastewater

Microbial approach towards anode biofilm engineering enhances extracellular electron transfer for bioenergy production

Microbial network for waste activated sludge cascade utilization in an integrated system of microbial electrolysis and anaerobic fermentation

(Invited) Bioelectrochemical Systems for Resource Recovery and H<sub>2</sub> Production from Wastewater

Nutrients recovery by coupled bioreactor of heterotrophic ammonia assimilation and microbial fuel cell in saline wastewater

A novel approach to recycle bacterial culture waste for fermentation reuse via a microbial fuel cell-membrane bioreactor system

An insight on energy production using microbial fuel cell: A microbiological perspective and electron transfer improvement

Advancements in Bioelectricity Generation Through Nanomaterial-Modified Anode Electrodes in Microbial Fuel Cells

Integrated chamber-free microbial fuel cell for wastewater purification and bioenergy generation

Synergistic advancements in sewage-driven microbial fuel cells: novel carbon nanotube cathodes and biomass-derived anodes for efficient renewable energy generation and wastewater treatment