Abstract:Maintenance of roadside ditches is important to avoid localized flooding and premature failure of pavements. Scheduling effective preventative maintenance requires mapping of the ditch profile to identify areas requiring excavation of long-term sediment accumulation. High-resolution, high-quality point clouds collected by mobile LiDAR mapping systems (MLMS) provide an opportunity for effective monitoring of roadside ditches and performing hydrological analyses. This study evaluated the applicability of mobile LiDAR for mapping roadside ditches for slope and drainage analyses. The performance of alternative MLMS units was performed. These MLMS included an unmanned ground vehicle, an unmanned aerial vehicle, a portable backpack system along with its vehicle-mounted version, a medium-grade wheel-based system, and a high-grade wheel-based system. Point cloud from all the MLMS units were in agreement in the vertical direction within the ±3 cm range for solid surfaces, such as paved roads, and ±7 cm range for surfaces with vegetation. The portable backpack system that could be carried by a surveyor or mounted on a vehicle and was the most flexible MLMS. The report concludes that due to flexibility and cost effectiveness of the portable backpack system, it is the preferred platform for mapping roadside ditches, followed by the medium-grade wheel-based system. Furthermore, a framework for ditch line characterization is proposed and tested using datasets acquired by the medium-grade wheel-based and vehicle-mounted portable systems over a state highway. An existing ground filtering approach is modified to handle variations in point density of mobile LiDAR data. Hydrological analyses, including flow direction and flow accumulation, are applied to extract the drainage network from the digital terrain model (DTM). Cross-sectional/longitudinal profiles of the ditch are automatically extracted from LiDAR data and visualized in 3D point clouds and 2D images. The slope derived from the LiDAR data was found to be very close to highway cross slope design standards of 2% on driving lanes, 4% on shoulders, as well as 6-by-1 slope for ditch lines. Potential flooded regions are identified by detecting areas with no LiDAR return and a recall score of 54% and 92% was achieved by the medium-grade wheel-based and vehicle-mounted portable systems, respectively. Furthermore, a framework for ditch line characterization is proposed and tested using datasets acquired by the medium-grade wheel-based and vehicle-mounted portable systems over a state highway. An existing ground filtering approach is modified to handle variations in point density of mobile LiDAR data. Hydrological analyses, including flow direction and flow accumulation, are applied to extract the drainage network from the digital terrain model (DTM). Cross-sectional/longitudinal profiles of the ditch are automatically extracted from LiDAR data, and visualized in 3D point clouds and 2D images. The slope derived from the LiDAR data was found to be very close to highway cross slope design standards of 2% on driving lanes, 4% on shoulder, as well as 6-by-1 slope for ditch lines. Potential flooded regions are identified by detecting areas with no LiDAR return and a recall score of 54% and 92% was achieved by the medium-grade wheel-based and vehicle-mounted portable systems, respectively.

Automatic cross section extraction and cross slope measurement for curved ramps using light detection and ranging point clouds

A Robust Curb Detection Algorithm Based on Lidar Sensor

Automatic Ground Points Identification Method for Roadside LiDAR Data

Rapid Geometric Evaluation of Transportation Infrastructure Based on a Proposed Low-Cost Portable Mobile Laser Scanning System

Application of UAV 3D Point Cloud Data in Highway Slope Disaster Investigation

GPS trajectory-based segmentation and multi-filter-based extraction of expressway curbs and markings from mobile laser scanning data

Extraction of Straight Field Roads Between Farmlands Based on Agricultural Vehicle -Mounted LiDAR

Three-Dimensional Reconstruction of Zebra Crossings in Vehicle-Mounted LiDAR Point Clouds

Road Ditch Line Mapping with Mobile LiDAR

Automatic Background Construction and Object Detection Based on Roadside LiDAR

The Fast and Continuous Railway Clearance Inspection Algorithm Based on Vehicle LiDAR Point Cloud

The Extraction of Street Curbs from Mobile Laser Scanning Data in Urban Areas

Automatic Extraction of Structural and Non-Structural Road Edges from Mobile Laser Scanning Data

Research on LiDAR point cloud data transformation method based on weighted altitude difference map

Road Curb Extraction from Mobile LiDAR Point Clouds

Terrain Point Cloud Assisted GB-InSAR Slope and Pavement Deformation Differentiate Method in an Open-Pit Mine

3D Road Boundary Extraction Based on Machine Learning Strategy Using LiDAR and Image-Derived MMS Point Clouds

Research on a pavement pothole extraction method based on vehicle-borne continuous laser scanning point cloud

Rapid assessment of slope deformation in 3D point cloud considering feature-based simplification and deformed area extraction

Projection and integration of connected-infrastructure LiDAR sensing data in a global coordinate

Automatic Road Marking Extraction and Vectorization from Vehicle-Borne Laser Scanning Data