Abstract:Journal of Composite Materials, Ahead of Print. Hybridizing the natural fibers with stronger synthetic fibers could significantly improve the properties of the natural fiber-reinforced composites. The improved mechanical capabilities of fiber reinforced polymers result from the fiber's capacity for withstanding a more substantial portion of the mechanical load compared to the matrix it replaces. In order to guarantee the efficient transfer of the mechanical load from the matrix to the reinforcement, it is necessary to incorporate a fibrous filler. Transference takes place when the length of the fiber is longer than a specific critical length. Fibers which are shorter than the critical length will pull out from the matrix when tested to a tensile load. In some cases, complete transfer of the load is not performed. The goal of this study is to learn more about flax (FF), glass (GF), and mixtures of flax and glass (FF + GF) short fiber-reinforced PLA-PBS composites. This is performed to find out how the flax/glass combination affects the mechanical properties of PLA-PBS-reinforced short fiber composites. In order to extend their use for industrial applications, these composites were manufactured via extrusion and, afterward, injection molding. Fiber aspect ratios were followed after compounding and injection processing. The analysis of fiber lengths reveals a noteworthy observation: the proportion of fibers exceeding their critical length of 531 μm and 772 μm for FF and GF, respectively, is more significant when flax fibers (FF) and glass fibers (GF) are combined compared to when they reinforce the composite individually. Specifically, the composite containing both FF and GF exhibits a higher percentage of fibers surpassing their critical length, compared to their individual reinforcement in the composite. The results reveal that 27% of individually extracted single FF exceed their critical length, whereas a higher proportion, at 34%, is observed when FF is part of the composite mixture. In contrast, the critical length is surpassed by only 4% of individually extracted single GF, whereas the combined presence of GF in the composite results in a notably higher percentage, at 19%. The tensile properties of these composites were investigated considering the effect of the hybridization by flax/glass short fibers. It was noted that the tensile properties of the hybrid composites increase comparing to the flax composites from 42.4 MPa to 53 MPa for the tensile strength and from 4.9 GPa to 5.4 GPa for the tensile modulus. In contrast, the elongation at break of the hybrid composites decreases from 1.7% to 1.5% with the incorporation of glass fibers. The experimental results were compared with the predictions of the mixture law and the Cox-Krenchel model. The findings indicate that mixing synthetic fibers with natural fibers is an excellent approach to enhancing mechanical properties.

Experimental characterizations of hybrid natural fiber-reinforced composite for wind turbine blades

Multi-objective optimization and modeling of a natural fiber hybrid reinforced composite (PxGyEz) for wind turbine blade development using grey relational analysis and regression analysis

Use of Yarn and Carded Jute as Epoxy Matrix Reinforcement for the Production of Composite Materials for Application in the Wind Sector: A Preliminary Analysis for the Manufacture of Blades for Low-Intensity Winds

Bo-derived waste neem to enriching reinforced hybrid composite for environmental remediation

Modelling and analysis of jute fiber reinforced epoxy composite in the development of wind blade for low intensity winds

Experimental Studies for the Creation of Composite Materials with Increased Static Mechanical Characteristics

Investigation of the hybridization effect on mechanical properties of natural fiber reinforced biosourced composites

Optimization of Characteristics Polymer Composite Reinforced Kenaf and Jute Fiber Using Taguchi-Response Surface Methodology Approach

Multi-Objective Optimization of Glass/Carbon Hybrid Composites for Small Wind Turbine Blades using Extreme Mixture Design Response Surface Methodology

Manufacturing of a natural fiber/glass fiber hybrid reinforced polymer composite (PxGyEz) for high flexural strength: an optimization approach

Performance Analysis of Reinforced Epoxy Functionalized Carbon Nanotubes Composites for Vertical Axis Wind Turbine Blade

Performance analysis of wind turbine blades using E-Glass fiber and SiO2- Al2O3-TiO2 MMT nanocomposite with AW 106 epoxy

Mechanical, morphological and wear resistance of natural fiber / glass fiber-based polymer composites

Enhancing Epoxy Composite Performance with Carbon Nanofillers: A Solution for Moisture Resistance and Extended Durability in Wind Turbine Blade Structures

Enhancement of mechanical and structural characteristics through the hybridization of carbon fiber with Cordia‐dichotoma/polyester composite

Composites techniques optimization and finite element analysis of kenaf fiber reinforced epoxy nonwoven composite structures for renewable energy infrastructure

Mechanical (Static and Dynamic) Characterization and Thermal stability of hybrid green composites for Engineering Applications

Comparative study of the thermomechanical properties of natural fiber reinforced thermoplastic composites: A structural application for quadcopter design

Tensile mechanical performance of natural/natural fiber reinforced hybrid bio-composite materials – A statistical approach

Recent Progress on Natural Fibers Mixed with CFRP and GFRP: Properties, Characteristics, and Failure Behaviour

Evaluation of the Mechanical Properties of a Novel Hybrid Composite Composed of Rattan and Date Palm Fiber: An Experimental Study