Abstract:Cu-ZnO-Al2O3 is the most widely applied catalyst for CO2 hydrogenation to methanol. However, it is still a challenge to produce methanol using this catalyst under low-temperature (<250 °C) and low-pressure (<10 bar) conditions with desirable yield and selectivity. In this work, by tuning the experimental processing parameters such as solvent, loading amount, and annealing temperature, highly improved ZnO nanoarray supported Cu-ZnO-Al2O3 catalysts have been successfully demonstrated. By using organic solvent (N,N-dimethylformamide (DMF), acetone, or isopropanol) for dip-coating loading process instead of deionized (DI) water, Cu-ZnO-Al2O3 nanocatalysts was comparatively better dispersed on the nanorod array support with populated and abundant active sites, thus enhancing the methanol yield. With the control of the loading amount and annealing temperature, finely distributed Cu nanoparticles were obtained on the ZnO nanorod surfaces to enhance the interactions between Cu and ZnO nanorod surfaces. Further improvement of the catalyst performance is demonstrated by tuning the reaction space velocity. At 200 °C and 10 bar conditions, the optimized catalyst achieved a methanol yield of 6.46 mol h−1 kg−1 with 100 % selectivity. The good stability after prolonged testing of the catalysts demonstrates the potential practical implementation. The in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) measurements under the 1 bar reveal that the CO2 hydrogenation to methanol on the ZnO nanoarray supported Cu-ZnO-Al2O3 catalyst follows the CO reaction pathway, due to the surface oxygen vacancies on ZnO nanorods which facilitate CO2 dissociation.

New black indium oxide-tandem photothermal CO2-H2 methanol selective catalyst

RuCo/ZrO2 Tandem Catalysts with Photothermal Confinement Effect for Enhanced CO2 Methanation.

Theoretical Investigation on the CO2 Hydrogenation to Methanol Mechanism at Electron-Rich Active Interface over Cu/Ga-Ti-Al-O Catalyst

Photothermal tandem catalysis for CO2 hydrogenation to methanol

A living photocatalyst derived from CaCu<sub>3</sub>Ti<sub>4</sub>O<sub>12</sub> for CO<sub>2</sub> hydrogenation to methanol at atmospheric pressure

Black indium oxide a photothermal CO2 hydrogenation catalyst

Highly efficient and stable photothermal catalytic CO<sub>2</sub> hydrogenation to methanol over Ru/In<sub>2</sub>O<sub>3</sub> under atmospheric pressure

Photothermal CO2 hydrogenation to methanol over a CoO/Co/TiO2 catalyst in aqueous media under atmospheric pressure

Unprecedented InOOH Hexagonal Nanoplates for Highly Selective Synthesis of Methanol Via Moderately Photothermal CO2 Hydrogenation

A highly efficient Cu/ZnOx/ZrO2 catalyst for selective CO2 hydrogenation to methanol

Cu-supported nano-ZrZnOx as a highly active inverse catalyst for low temperature methanol synthesis from CO2 hydrogenation

Near‐Unity Photothermal CO2 Hydrogenation to Methanol based on a Molecule/Nanocarbon Hybrid Catalyst

Cu/ZnO/Al2O3 Catalyst Modulated by Zirconia with Enhanced Performance in CO2 Hydrogenation to Methanol

Photothermal CO2 Hydrogenation to Methanol over Ni-In2O3/g-C3N4 Heterojunction Catalysts

Optimizing interfacial interaction between Cu and metal oxides boosts methanol yield in CO2 hydrogenation

Breaking the Conversion-Selectivity Trade-Off in Methanol Synthesis from CO2 Using Dual Intimate Oxide/Metal Interfaces

Inverse ZrO2/Cu as a highly efficient methanol synthesis catalyst from CO2 hydrogenation

Optimization and understanding of ZnO nanoarray supported Cu-ZnO-Al2O3 catalyst for enhanced CO2 -methanol conversion at low temperature and pressure

The Role of Cu1-O3 Species in Single-Atom Cu Catalyst for Directional Methanol Synthesis from CO2 Hydrogenation

Carbon coated In2O3 hollow tubes embedded with ultra-low content ZnO quantum dots as catalysts for CO2 hydrogenation to methanol

Ni-Doped In 2 O 3 Photothermal Coupling Catalyzed Boosted Carbon Dioxide Hydrogenation to Methanol