Abstract:While flow-through anodic oxidation (FTAO) technique has demonstrated high efficiency to treat various refractory waste streams, there is an increasing concern on the secondary hazard generation thereby. In this study, we developed an integrated system that couples FTAO and cathodic reduction processes (termed FTAO-CR) for sustainable treatment of chlorine-laden industrial wastewater. Among four common electrode materials ( i.e. , Ti 4 O 7 , β -PbO 2 , RuO 2 , and SnO 2 -Sb), RuO 2 flow-through anode exhibited the best pollutant removal performance and relatively low ClO 3 and ClO 4 yields. Because of the significant scavenging effect of Cl − in real wastewater treatment, the direct electron transfer process played a dominant role in contaminant degradation for both active and nonactive anodes though active species ( i.e. , active chlorine) were involved in the subsequent transformation of the organic matter. A continuous FTAO-CR system was then constructed for simultaneous COD removal and organic and inorganic chlorinated byproduct control. The quality of the treated effluent could meet the national discharge permit limit at low energy cost (~4.52 kWh m 3 or ~0.035 kWh g 1 -COD). Results from our study pave the way for developing novel electrochemical platforms for the purification of refractory waste streams whilst minimizing the secondary pollution. Environmental Implications Industrial wastewater usually features high organic matter content and complex composition, posing a significant environmental risk. While anodic oxidation has demonstrated high efficiency, there is increasing concern on the secondary hazard generation thereby. An energy-efficient system coupling flow-through anodic oxidation and cathodic reduction processes is therefore proposed, achieving simultaneous organic contaminant removal and chlorinated byproduct control. The direct electron transfer process imparts an advantage in treating chlorine-laden wastewater compared to the • OH-based advanced oxidation counterparts. The results of this study pave the way for developing novel electrochemical platforms for the purification of refractory waste streams whilst minimizing the secondary pollution.

Electrochemical removal of 4-chlorophenol in water using a porous Magnéli-phase (Ti4O7) electrode

Electrochemical Oxidation of Chemi-Thermo-mechanical Pulping Wastewater

Enhanced treatment of p-nitrophenol and coking wastewater through electrochemical and electrochemical-ozonation coupling process utilizing a novel Ti4O7 reactive electrochemical membrane anode

Phenol Degradation in an Electrochemical System with TiO2/activated Carbon Fiber As Electrode

Electrochemical oxidation of phenol in chloride containing electrolyte using a carbon-coated Ti4O7 anode

Removal of phenol from wastewater by electrochemical bromination in a flow reactor

Energy-efficient Treatment of Refractory Industrial Effluent Using Flow-through Electrochemical Processes: Oxidation Mechanisms and Reduction of Chlorinated Byproducts

Selective electrochemical degradation of 4-chlorophenol at a Ti/RuO2-IrO2 anode in chloride rich wastewater

Removal of 4-Chlorophenol from Polluted Water by Aluminum-Iron Alloys.

Electrocatalytic Degradation of Phenolic Wastewater Using a Zero-Gap Flow-Through Reactor Coupled with a 3D Ti/RuO2-TiO2@Pt Electrode

Electrocatalytic deep hydrogenation of 4-chlorophenol into cyclohexanol on microchannel-enhanced Ru/TiO2 for wastewater detoxification and simultaneous resource recovery

Flow-through heterogeneous electro-Fenton system based on the absorbent cotton derived bulk electrode for refractory organic pollutants treatment

Three-dimensional functional carbon nanotube architecture as a highly efficient and active indirect catalyst for degradation of 4-chlorophenol

Square-wave pulsed potential driven electrocatalytic degradation of 4-chlorophenol using Fe-Ni/rGO/PPy@NF three dimensional electrode

Intensive investigation of the synergistic effects between electrocatalysis and peroxymonosulfate activation for efficient organic elimination

The cooperative electrochemical oxidation of chlorophenols in anode-cathode compartments

Electrochemical activation of peroxymonosulfate with titanium suboxide anode for 4-chlorophenol degradation: Influencing factors, kinetics, and degradation mechanism

Flow-through integration of FeOCl/graphite felt-based heterogeneous electro-Fenton and Ti4O7-based anodic oxidation for efficient contaminant degradation

Electrochemical degradation of phenol by in situ electro-generated and electro-activated hydrogen peroxide using an improved gas diffusion cathode

High-efficiency electrochemical activation of H2O2 into ·OH enabled by flow-through FeOCl-modified carbon electrode for organic pollutants degradation

Electrochemical Treatment of Phenol-Containing Wastewater by Facet-Tailored TiO2: Efficiency, Characteristics and Mechanisms.