Direct membrane-carbonation photobioreactor producing photoautotrophic biomass via carbon dioxide transfer and nutrient removal.

Hyun-Woo Kim,Jingsai Cheng,B. Rittmann

DOI: https://doi.org/10.1016/j.biortech.2015.12.066

IF: 11.4

2016-03-01

Bioresource Technology

Abstract:

What problem does this paper attempt to address?

Condition Monitoring for Roller Bearings of Wind Turbines Based on Health Evaluation under Variable Operating States

Lei Fu,Yan-ding Wei,Sheng Fang,Xiaojun Zhou,Junqiang Lou

DOI: https://doi.org/10.3390/en10101564

IF: 3.2

2017-01-01

Energies

Abstract:Condition monitoring (CM) is used to assess the health status of wind turbines (WT) by detecting turbine failure and predicting maintenance needs. However, fluctuating operating conditions cause variations in monitored features, therefore increasing the difficulty of CM, for example, the frequency-domain analysis may lead to an inaccurate or even incorrect prediction when evaluating the health of the WT components. In light of this challenge, this paper proposed a method for the health evaluation of WT components based on vibration signals. The proposed approach aimed to reduce the evaluation error caused by the impact of the variable operating condition. First, the vibration signal was decomposed into a set of sub-signals using variational mode decomposition (VMD). Next, the sub-signal energy and the probability distribution were obtained and normalized. Finally, the concept of entropy was introduced to evaluate the health condition of a monitored object to provide an effective guide for maintenance. In particular, the health evaluation for CM was based on a performance review over a range of operating conditions, rather than at a certain single operating condition. Experimental investigations were performed which verified the efficiency of the evaluation method, as well as a comparison with the previous method.
AE health monitoring technique for composite wind turbine blade: a state-of-art review

Pengfei Liu,Dehong Xu

2023-01-01

Abstract:First, this chapter introduces basic structures and damage mechanisms of wind turbine blades. Second, the acoustic emission (AE) test principle, advantages, AE resources of composites, AE types and basic feature parameters, and signal processing method are given. Third, research progress on the defect positioning methods, damage mode identification, and damage evaluation model of composites are reviewed.
An Overview on Structural Health Monitoring and Fault Diagnosis of Offshore Wind Turbine Support Structures

Yang Yang,Fayun Liang,Qingxin Zhu,Hao Zhang

DOI: https://doi.org/10.3390/jmse12030377

IF: 2.744

2024-02-23

Journal of Marine Science and Engineering

Abstract:The service environment of offshore wind turbine (OWT) support structures is harsh, and it is extremely difficult to replace these structures during their operational lifespan, making their failure a catastrophic event. The structural health monitoring (SHM) of OWT support structures is a crucial aspect of operational maintenance for OWT support structures, aiming to mitigate significant financial losses. This paper systematically summarizes the current monitoring methods and technologies for OWT support structures, including towers and foundations. Through the review of monitoring content and the evolution of monitoring techniques for supporting structures, it delves deeper into the challenges faced by wind turbine monitoring and highlights potential avenues for future development. Then, the current damage identification techniques for OWT towers and foundations are analyzed, exploring various methods including model-based, vibration-based, artificial intelligence and hybrid fault diagnosis methods. The article also examines the advantages and disadvantages of each approach and outlines potential future directions for research and development in this field. Furthermore, it delves into the current damage identification techniques for OWT towers and foundations, discussing prevalent challenges and future directions in this domain. This status review can provide reference and guidance for the monitoring design of OWT support structures, and provide support for the fault diagnosis of OWT support structures.

oceanography,engineering, marine, ocean
Progress and Trends in Damage Detection Methods, Maintenance, and Data-driven Monitoring of Wind Turbine Blades – A Review

Kyungil Kong,Kirsten Dyer,Christopher Payne,Ian Hamerton,Paul M Weaver

DOI: https://doi.org/10.1016/j.ref.2022.08.005

2022-08-30

Renewable Energy Focus

Abstract:In recent decades, renewable energy has attracted attention as a viable energy supply. Among renewable energy sources, offshore wind energy has been considerably growing since longer and larger wind turbine composite blades were deployed. The manufacture of the longer and larger composite blades leads to more wind energy production. However, the wind turbine composite blades are susceptible to damage and defects due to multiple structural loads and harsh operating environments in service. Hence, condition monitoring and maintenance of wind turbine composite blades require in-depth investigation to prevent structural damage and defects and to improve remaining lifetime of the composite structure. The types of damage and defects in wind turbine composite blades are typically delamination, debonding, and cracks, which are influenced by the intrinsic structural nonlinearities, manufacturing process stage, and harsh environmental impacts in service. For these reasons, the regular condition monitoring of the composite blades is required to assess degradation in performance and structural condition to minimise levelised energy costs for maintenance. To improve reliability and sustainability, data-driven inspection with digital twin technology is reviewed as a trend of condition monitoring frameworks. Advanced functional materials to potentially assist current non-destructive testing (NDT) methods or to be utilised as self-sensing performance are reviewed. From manufacturing to the system level, a comprehensive review on progress and trends of monitoring of wind turbine composite blades is carried out including physics-based NDT methods, data fusion in sensor networks, automated system, mechanics, and digital twin technology with the environmental coupling.
Structural Health Monitoring of Composite Wind Turbine Blades: Challenges, Issues and Potential Solutions

Wenxian Yang,Zhike Peng,Kexiang Wei,Wenye Tian

DOI: https://doi.org/10.1049/iet-rpg.2016.0087

IF: 3.034

2017-01-01

IET Renewable Power Generation

Abstract:Wind turbine (WT) blades are vulnerable to failure as they are exposed to direct harsh environment, suffering constantly varying loads by wind and cyclic fatigue load due to self-weight, experiencing extreme temperature and humidity changes, erosion and corrosion. As a consequence, blades show high failure rate and share significant downtime, which highlight the significance and essentiality of the research, development and application of blade structural health monitoring (SHM) techniques. To fulfil reliable SHM of WT blades, much effort has been spent in the past years as reported in the literature. However, to date, how to realise reliable WT blade SHM is still an open question. The previous reviews enumerate the non-destructive testing techniques that are potentially applicable to blade SHM, but they fail to indicate which technique is most suitable for blade SHM and how to implement reliable SHM of a WT blade. To fill this gap, this study is geared toward to investigate the pros and cons of existing blade SHM techniques and following which, a newly developed blade SHM technique that is effective in both damage detection and fault location is discussed.
Genotype and antibiotic susceptibility patterns of Pseudomonas aeruginosa and Stenotrophomonas maltophilia isolated from cystic fibrosis patients.

H. Nazik,B. Ongen,Z. Erturan,M. Salcioğlu

DOI: https://doi.org/10.7883/yoken.jjid.2007.82

2007-05-01

Abstract:The purpose of this study was to type the Pseudomonas aeruginosa and Stenotrophomonas maltophilia isolates recovered from cystic fibrosis (CF) patients by random amplified polymorphic DNA (RAPD)-PCR and to determine the antibiotic susceptibility of these strains. P. aeruginosa (n=49), and S. maltophilia (n=11) isolates which had been recovered from 16 and 8 patients, respectively, during a 1-year period were investigated. Three primers were used for RAPD-PCR typing. Antibiotic susceptibility testing of all isolates was performed by the disc diffusion method. RAPD-PCR analysis revealed 21 (P. aeruginosa) and 9 (S. maltophilia) different genotypes. According to the antimicrobial susceptibility results, the P. aeruginosa and S. maltophilia strains were cumulated into 24 and 11 groups, respectively. The CF patients were colonized or infected with P. aeruginosa strains of single or sometimes multiple genotypes which remained stable over several months. Our results also revealed that cross-colonization might be possible among the patients who are followed up at the same center. Piperacillin-tazobactam for P. aeruginosa and trimethoprim-sulfamethoxazole for S. maltophilia were found to be the most active antibiotics according to our results.
In-situ Condition Monitoring of Wind Turbine Blades: A Critical and Systematic Review of Techniques, Challenges, and Futures

Shilin Sun,Tianyang Wang,Fulei Chu

DOI: https://doi.org/10.1016/j.rser.2022.112326

IF: 16.799

2022-01-01

Renewable and Sustainable Energy Reviews

Abstract:Blades are critical components in wind turbines (WTs) for power generation, and condition monitoring (CM) of WT blades is a crucial and challenging issue under operating conditions. Several methods have been developed to assess blade health status, and some of them have the potential to achieve in-situ CM. Nevertheless, there is a lack of critical and comprehensive survey concerning CM techniques for operational WT blades, as well as unsolved problems and research prospects. In this paper, typical causes and types of blade damage that deserve to be considered during the running time are presented. Besides, in-situ CM techniques for WT blades are reviewed in terms of four sub-targets: damage detection, localization, classification, and evaluation. Further, the investigation and development timeline of in-situ CM methods and types of damage that have been verified to be recognizable in field tests are concluded for the first time. The paper ends with discussions on research impediments and prospects that indicate promising development tendencies.
A Systematic Review of Advanced Sensor Technologies for Non-Destructive Testing and Structural Health Monitoring

Sahar Hassani,Ulrike Dackermann

DOI: https://doi.org/10.3390/s23042204

IF: 3.9

2023-02-16

Sensors

Abstract:This paper reviews recent advances in sensor technologies for non-destructive testing (NDT) and structural health monitoring (SHM) of civil structures. The article is motivated by the rapid developments in sensor technologies and data analytics leading to ever-advancing systems for assessing and monitoring structures. Conventional and advanced sensor technologies are systematically reviewed and evaluated in the context of providing input parameters for NDT and SHM systems and for their suitability to determine the health state of structures. The presented sensing technologies and monitoring systems are selected based on their capabilities, reliability, maturity, affordability, popularity, ease of use, resilience, and innovation. A significant focus is placed on evaluating the selected technologies and associated data analytics, highlighting limitations, advantages, and disadvantages. The paper presents sensing techniques such as fiber optics, laser vibrometry, acoustic emission, ultrasonics, thermography, drones, microelectromechanical systems (MEMS), magnetostrictive sensors, and next-generation technologies.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Condition-based structural health monitoring of offshore wind jacket structures: Opportunities, challenges, and perspectives

Jiaxuan Leng,Paolo Gardoni,Mengmeng Wang,Zhixiong Li,Grzegorz Królczyk,Shizhe Feng,Atilla Incecik,Weihua Li

DOI: https://doi.org/10.1177/14759217221148688

2023-01-25

Structural Health Monitoring

Abstract:Structural Health Monitoring, Ahead of Print. Structural health monitoring (SHM) has been recognized as a useful tool for safety management and risk reduction of offshore wind farms. In complex offshore environment, jacket structures of offshore wind turbines are prone to damages due to corrosion and fatigue. Effective SHM on jacket structures can substantially reduce their operation risk and costs. This work reviews the latest progress on the SHM of offshore wind jacket structures. The achievements in the structural damage identification, location, quantification, and remaining useful life (RUL) estimation are respectively introduced in detail, and existing challenges are discussed. Possible solutions to the challenges using the Digital Twin (DT) technology are put forward. The DT is able to mirror a real jacket structure into a virtual model, and Bayesian updating can refresh the virtual model parameters in real-time to keep consistency between virtual model and physical structure; then, just-in-time SHM can be carried out for jacket structures by performing damage detection, location, quantification, and RUL estimation using the virtual model. As a result, the DT may provide engineers and researchers a practicable tool for safety monitoring and risk reduction of fixed foundation offshore wind structures.

engineering, multidisciplinary,instruments & instrumentation
A review of recent advances in wind turbine condition monitoring and fault diagnosis

Bin Lu,Yaoyu Li,Xin Wu,Zhongzhou Yang

DOI: https://doi.org/10.1109/pemwa.2009.5208325

2009-06-01

Abstract:The state-of-the-art advancement in wind turbine condition monitoring and fault diagnosis for the recent several years is reviewed. Since the existing surveys on wind turbine condition monitoring cover the literatures up to 2006, this review aims to report the most recent advances in the past three years, with primary focus on gearbox and bearing, rotor and blades, generator and power electronics, as well as system-wise turbine diagnosis. There are several major trends observed through the survey. Due to the variable-speed nature of wind turbine operation and the unsteady load involved, time-frequency analysis tools such as wavelets have been accepted as a key signal processing tool for such application. Acoustic emission has lately gained much more attention in order to detect incipient failures because of the low-speed operation for wind turbines. There has been an increasing trend of developing model based reasoning algorithms for fault detection and isolation as cost-effective approach for wind turbines as relatively complicated system. The impact of unsteady aerodynamic load on the robustness of diagnostic signatures has been notified. Decoupling the wind load from condition monitoring decision making will reduce the associated down-time cost.
Assessment of Condition Monitoring Techniques for Offshore Wind Farms

Edwin Wiggelinkhuizen,Theo Verbruggen,Henk Braam,Luc Rademakers,Jianping Xiang,Simon Watson

DOI: https://doi.org/10.1115/1.2931512

2008-06-24

Journal of Solar Energy Engineering

Abstract:This paper discusses the results of an extensive investigation to assess the added value of various techniques of health monitoring to optimize the maintenance procedures of offshore wind farms. This investigation was done within the framework of the EU funded Condition Monitoring for Offshore Wind Farms (CONMOW) project, which was carried out from 2002 to 2007. A small wind farm of five turbines has been instrumented with several condition monitoring systems and also with the “traditional” measurement systems for measuring mechanical loads and power performance. Data from vibration and traditional measurements, together with data collected by the turbine’s system control and data acquisition (SCADA) systems, have been analyzed to assess (1) if failures can be determined from the different data sets; (2) if so, if they can be detected at an early stage and if their progress over time can be monitored; and (3) if criteria are available to assess the component’s health. Several data analysis methods and measurement configurations have been developed, applied, and tested. This paper first describes the use of condition monitoring if condition based maintenance is going to be applied instead of only scheduled and corrective maintenance. Second, the paper describes the CONMOW project and its major results, viz., the assessment of the usefulness and capabilities of condition monitoring systems, including algorithms for identifying early failures. Finally, the economic consequences of applying condition monitoring systems have been quantified and assessed.
Wind turbine condition monitoring: technical and commercial challenges

Wenxian Yang,Peter J. Tavner,Christopher J. Crabtree,Y. Feng,Y. Qiu

DOI: https://doi.org/10.1002/we.1508

2012-08-01

Wind Energy

Abstract:ABSTRACT Deployment of larger scale wind turbine systems, particularly offshore, requires more organized operation and maintenance strategies to ensure systems are safe, profitable and cost‐effective. Among existing maintenance strategies, reliability centred maintenance is regarded as best for offshore wind turbines, delivering corrective and proactive (i.e. preventive and predictive) maintenance techniques enabling wind turbines to achieve high availability and low cost of energy. Reliability centred maintenance analysis may demonstrate that an accurate and reliable condition monitoring system is one method to increase availability and decrease the cost of energy from wind. In recent years, efforts have been made to develop efficient and cost‐effective condition monitoring techniques for wind turbines. A number of commercial wind turbine monitoring systems are available in the market, most based on existing techniques from other rotating machine industries. Other wind turbine condition monitoring reviews have been published but have not addressed the technical and commercial challenges, in particular, reliability and value for money. The purpose of this paper is to fill this gap and present the wind industry with a detailed analysis of the current practical challenges with existing wind turbine condition monitoring technology. Copyright © 2012 John Wiley & Sons, Ltd.

energy & fuels,engineering, mechanical
Non-Contact Inspection Methods for Wind Turbine Blade Maintenance: Techno–Economic Review of Techniques for Integration with Industry 4.0

Ahmad Aminzadeh,Mariya Dimitrova,Mohammad Saleh Meiabadi,Sasan Sattarpanah Karganroudi,Hossein Taheri,Hussein Ibrahim,Yuxin Wen

DOI: https://doi.org/10.1007/s10921-023-00967-5

2023-06-14

Journal of Nondestructive Evaluation

Abstract:Wind energy has emerged as a critical source of renewable energy worldwide, and the performance of wind turbines relies heavily on the quality and design of their blades. However, the manual manufacturing process of wind turbine blades using polymeric matrix composite materials makes them susceptible to irregular and complex loading damage. This damage can lead to reduced power generation, shortened lifespan, and increased maintenance costs. Therefore, non-destructive testing (NDT) of wind turbine blades is necessary to identify surface and internal defects, ensuring the sustainable operation of the wind turbines. This article briefly reviews wind turbine blades' materials, design, and manufacturing methodology. We also discuss the inspection strategy during production and inspection methods during operation. Five non-contact NDT techniques, including thermography, radiography, machine vision, laser shearography testing, and microwave testing, are appraised to inspect wind turbine blade damage. These techniques were evaluated using a Techno–Economic approach that considers technical and economic factors, such as accuracy, cost, reliability, and ease of implementation. Thanks to technological advancements, integrating non-contact inspection methods with Industry 4.0 technologies can help improve wind power generation's safety, efficiency, and reliability. However, evaluating available methods' compatibility with Industry 4.0 technologies may be necessary.

materials science, characterization & testing
Structural health monitoring of an onshore steel wind turbine

Marco Simoncelli,Marco Zucca,Matteo Ghilardi

DOI: https://doi.org/10.1007/s13349-024-00794-w

2024-04-12

Journal of Civil Structural Health Monitoring

Abstract:The study presents the development of a structural monitoring system installed in a 45-m-high steel wind tower located in Italy. The installed monitoring system was composed by 16 strain gauges placed in the tower wall, in a pattern of four Wheatstone bridges at 45°, together with thermal couples, at 21 m from the ground (half-height of the tower). Moreover, several accelerometers were placed along the tower height (with one of them located next to the strain gauges). The wind velocity and directions were obtained directly from the turbine own monitoring system. Such a monitoring system was designed because, due to the decrement of the total height from the original design, the tower suffers from resonance problems. In fact, the investigated tower was originally designed with 65 m of height but then, to comply with local regulations, the height was decreased to the actual size. Therefore, to allow safe operation and avoid excessive fatigue due to the increased displacements, the velocity of the rotor has been manually limited causing an important reduction in the energy production. The results of the study show the importance of monitoring the resonance issue. The differences between the damage indexes obtained with two different working conditions are discussed: tower working with limited operational capacity and tower working at its maximum capacity (in resonance).

engineering, civil
Recent Advancements in Non-Destructive Testing Techniques for Structural Health Monitoring

Patryk Kot,Magomed Muradov,Michaela Gkantou,George S. Kamaris,Khalid Hashim,David Yeboah

DOI: https://doi.org/10.3390/app11062750

2021-03-18

Applied Sciences

Abstract:Structural health monitoring (SHM) is an important aspect of the assessment of various structures and infrastructure, which involves inspection, monitoring, and maintenance to support economics, quality of life and sustainability in civil engineering. Currently, research has been conducted in order to develop non-destructive techniques for SHM to extend the lifespan of monitored structures. This paper will review and summarize the recent advancements in non-destructive testing techniques, namely, sweep frequency approach, ground penetrating radar, infrared technique, fiber optics sensors, camera-based methods, laser scanner techniques, acoustic emission and ultrasonic techniques. Although some of the techniques are widely and successfully utilized in civil engineering, there are still challenges that researchers are addressing. One of the common challenges within the techniques is interpretation, analysis and automation of obtained data, which requires highly skilled and specialized experts. Therefore, researchers are investigating and applying artificial intelligence, namely machine learning algorithms to address the challenges. In addition, researchers have combined multiple techniques in order to improve accuracy and acquire additional parameters to enhance the measurement processes. This study mainly focuses on the scope and recent advancements of the Non-destructive Testing (NDT) application for SHM of concrete, masonry, timber and steel structures.
Condition monitoring of wind turbines: Techniques and methods

Fausto Pedro García Márquez,Andrew Mark Tobias,Jesús María Pinar Pérez,Mayorkinos Papaelias

DOI: https://doi.org/10.1016/j.renene.2012.03.003

IF: 8.7

2012-10-01

Renewable Energy

Abstract:Wind Turbines (WT) are one of the fastest growing sources of power production in the world today and there is a constant need to reduce the costs of operating and maintaining them. Condition monitoring (CM) is a tool commonly employed for the early detection of faults/failures so as to minimise downtime and maximize productivity. This paper provides a review of the state-of-the-art in the CM of wind turbines, describing the different maintenance strategies, CM techniques and methods, and highlighting in a table the various combinations of these that have been reported in the literature. Future research opportunities in fault diagnostics are identified using a qualitative fault tree analysis.

energy & fuels,green & sustainable science & technology
A Review of Machine Vision-Based Structural Health Monitoring: Methodologies and Applications

X. W. Ye,C. Z. Dong,T. Liu

DOI: https://doi.org/10.1155/2016/7103039

IF: 2.336

2016-01-01

Journal of Sensors

Abstract:In the past two decades, a significant number of innovative sensing and monitoring systems based on the machine vision-based technology have been exploited in the field of structural health monitoring (SHM). This technology has some inherent distinctive advantages such as noncontact, nondestructive, long distance, high precision, immunity to electromagnetic interference, and large-range and multiple-target monitoring. A lot of machine vision-based structural dynamic measurement and structural state inspection methods have been proposed. Real-world applications are also carried out to measure the structural physical parameters such as the displacement, strain/stress, rotation, vibration, crack, and spalling. The purpose of this review article is devoted to presenting a summary of the basic theories and practical applications of the machine vision-based technology employed in structural monitoring as well as its systematic error sources and integration with other modern sensing techniques.
A review of wind turbine bearing condition monitoring: State of the art and challenges

Henrique Dias Machado de Azevedo,Alex Maurício Araújo,Nadège Bouchonneau

DOI: https://doi.org/10.1016/j.rser.2015.11.032

IF: 16.799

2016-04-01

Renewable and Sustainable Energy Reviews

Abstract:Since the early 1980s, wind power technology has experienced an immense growth with respect to both the turbine size and market share. As the demand for large-scale wind turbines and lor operation & maintenance cost continues to raise, the interest on condition monitoring system has increased rapidly. The main components of wind turbines are the focus of all CMS since they frequently cause high repair costs and equipment downtime. However, vast quantities of their failures are caused due to a bearing failure. Therefore, bearing condition monitoring becomes crucial. This paper aims at providing a state-of-the-art review on wind turbine bearing condition monitoring techniques such as acoustic measurement, electrical effects monitoring, power quality, temperature monitoring, wear debris analysis and vibration analysis. Furthermore, this paper will present a literature review and discuss several technical, financial and operational challenges from the purchase of the CMS to the wind farm monitoring stage.

energy & fuels,green & sustainable science & technology
Wind turbine condition monitoring by the approach of SCADA data analysis

Wenxian Yang,Richard Court,Jiesheng Jiang

DOI: https://doi.org/10.1016/j.renene.2012.11.030

IF: 8.7

2013-05-01

Renewable Energy

Abstract:Wind turbines are being increasingly deployed in remote onshore and offshore areas due to the richer wind resource there and the advantages of mitigating the land use and visual impact issues. However, site accessing difficulties and the shortage of proper transportation and installation vehicles/vessels are challenging the operation and maintenance of the giants erected at these remote sites. In addition to the continual pressure on lowering the cost of energy of wind, condition monitoring is being regarded as one of the best solutions for the maintenance issues and therefore is attracting significant interest today. Much effort has been made in developing wind turbine condition monitoring systems and inventing dedicated condition monitoring technologies. However, the high cost and the various capability limitations of available achievements have delayed their extensive use. A cost-effective and reliable wind turbine condition monitoring technique is still sought for today. The purpose of this paper is to develop such a technique through interpreting the SCADA data collected from wind turbines, which have already been collected but have long been ignored due to lack of appropriate data interpretation tools. The major contributions of this paper include: (1) develop an effective method for processing raw SCADA data; (2) propose an alternative condition monitoring technique based on investigating the correlations among relevant SCADA data; and (3) realise the quantitative assessment of the health condition of a turbine under varying operational conditions. Both laboratory and site verification tests have been conducted. It has been shown that the proposed technique not only has a potential powerful capability in detecting incipient wind turbine blade and drive train faults, but also exhibits an amazing ability in tracing their further deterioration.

energy & fuels,green & sustainable science & technology
A data-based model for condition monitoring and maintenance planning for protective coating systems for wind tower structures

Andreas W. Momber,Tim W. Nattkemper,Daniel Langenkämper,Torben Möller,Daniel Brün,Peter Schaumann,Sulaiman Shojai

DOI: https://doi.org/10.1016/j.renene.2022.01.022

IF: 8.7

2022-03-01

Renewable Energy

Abstract:The application of protective coating systems is the major measure against the corrosion of steel structures for onshore wind turbines. The organic coatings are, however, susceptible to atmospheric exposure and tend to deteriorate during the operation. At the same time, onshore turbines become more powerful and require taller and more resistant tower structures. The inspection and condition monitoring of protective coating systems on large onshore turbines (in excess of 120 m height) is a demanding and time-consuming procedure and requires high human effort. The rapid developments in digitization and data analysis offer opportunities to notably increase the efficiency of monitoring processes and to develop (semi-)automated standardized procedures. The paper describes a data-oriented approach to utilize digital data for the monitoring and maintenance planning of surface protection systems of large onshore wind turbines. The proposed approach includes the following steps: the segmentation of an existing wind power structure into a number of reference areas based on an In-situ Virtual Twin; the definition of a local deterioration degree for each individual reference area; the annotation of image data; the use of heterogenous multi-modal data (image data, geodetical data, meteorological data, profile scanning data) as the sources for condition assessment and monitoring. An example procedure is exercised for a tower structure of an onshore wind power turbine in order to illustrate the practical relevance of the approach.

energy & fuels,green & sustainable science & technology

Direct membrane-carbonation photobioreactor producing photoautotrophic biomass via carbon dioxide transfer and nutrient removal.

Condition Monitoring for Roller Bearings of Wind Turbines Based on Health Evaluation under Variable Operating States

AE health monitoring technique for composite wind turbine blade: a state-of-art review

An Overview on Structural Health Monitoring and Fault Diagnosis of Offshore Wind Turbine Support Structures

Progress and Trends in Damage Detection Methods, Maintenance, and Data-driven Monitoring of Wind Turbine Blades – A Review

Structural Health Monitoring of Composite Wind Turbine Blades: Challenges, Issues and Potential Solutions

Genotype and antibiotic susceptibility patterns of Pseudomonas aeruginosa and Stenotrophomonas maltophilia isolated from cystic fibrosis patients.

In-situ Condition Monitoring of Wind Turbine Blades: A Critical and Systematic Review of Techniques, Challenges, and Futures

A Systematic Review of Advanced Sensor Technologies for Non-Destructive Testing and Structural Health Monitoring

Condition-based structural health monitoring of offshore wind jacket structures: Opportunities, challenges, and perspectives

A review of recent advances in wind turbine condition monitoring and fault diagnosis

Assessment of Condition Monitoring Techniques for Offshore Wind Farms

Wind turbine condition monitoring: technical and commercial challenges

Non-Contact Inspection Methods for Wind Turbine Blade Maintenance: Techno–Economic Review of Techniques for Integration with Industry 4.0

Structural health monitoring of an onshore steel wind turbine

Recent Advancements in Non-Destructive Testing Techniques for Structural Health Monitoring

Condition monitoring of wind turbines: Techniques and methods

A Review of Machine Vision-Based Structural Health Monitoring: Methodologies and Applications

A review of wind turbine bearing condition monitoring: State of the art and challenges

Wind turbine condition monitoring by the approach of SCADA data analysis

A data-based model for condition monitoring and maintenance planning for protective coating systems for wind tower structures