Abstract:A highly sensitive (S = 108.52 kPa−1 for 0–5 kPa range) soft capacitive sensor worn like a Band‐Aid is developed such that continuous blood pressure monitoring is sustainably achieved after an initial, single point calibration obtained from the arm‐cuff. The sensor leverages iontronic material with air‐gaps for the dielectric combined with highly wrinkled, stretchable electrodes. Continuous beat‐to‐beat blood pressure (BP) monitoring provides hemodynamic information such as BP changes and waveforms over time, providing abundant information to more accurately diagnose a person's cardiovascular health compared to static cuff‐based measurements. To overcome the shortcomings of current techniques, a highly sensitive (S = 108.52 kPa−1 for 0–5 kPa range) soft capacitive sensor that can be worn like a Band‐Aid is developed such that continuous beat‐to‐beat BP monitoring can be sustainably achieved after an initial calibration. The sensor leverages iontronic material with air gaps for the dielectric combined with highly wrinkled, stretchable electrodes; the resulting average sensitivity of this device is demonstrated to be higher than that of other comparable sensors in literature. For the hemodynamic capture, the operating frequency of 300 kHz is chosen to achieve higher temporal resolution in continuous BP monitoring. Further, the multi‐island design in this work allows for rapid placement of the sensor without needing to accurately align with the underlying artery. Because of the improved sensitivity, the sensors can be adhered to the pulse points without an applanator. Finally, this sensor demonstrates sustained beat‐to‐beat blood pressure recordings that show excellent systolic, diastolic, and mean arterial pressure correlation with an FDA‐cleared device, the Caretaker.

Clinical nurses' ethical decision making in situations of informed consent

Wearable Skin-Like Optoelectronic Systems with Suppression of Motion Artifacts for Cuff-Less Continuous Blood Pressure Monitor

Flexible Weaving Constructed Self‐Powered Pressure Sensor Enabling Continuous Diagnosis of Cardiovascular Disease and Measurement of Cuffless Blood Pressure

Thin, soft, wearable system for continuous wireless monitoring of artery blood pressure

A new method of continuous blood pressure monitoring using multichannel sensing signals on the wrist

A highly elastic, moisturizing, and adhesion conductive hydrogel designed for cuffless blood pressure measurement

Continuous cuffless monitoring of arterial blood pressure via graphene bioimpedance tattoos

Highly Wearable Cuff-Less Blood Pressure and Heart Rate Monitoring with Single-Arm Electrocardiogram and Photoplethysmogram Signals

Unconstrained blood pressure monitoring based on a neural network–assisted multistage pressure textile sensor

Continuous cuffless blood pressure monitoring with a wearable ring bioimpedance device

Soft Iontronic Capacitive Sensor for Beat‐to‐Beat Blood Pressure Measurements

Flexible Non-contact Electrodes for Wearable Biosensors System on Electrocardiogram Monitoring in Motion

Ambulatory Cardiovascular Monitoring Via a Machine‐Learning‐Assisted Textile Triboelectric Sensor

Highly flexible, wearable, and disposable cardiac biosensors for remote and ambulatory monitoring

A flexible multimodal pulse sensor for wearable continuous blood pressure monitoring

An Unobtrusive, Wireless and Wearable Single-Site Blood Pressure Monitor Based on an Armband Using Electrocardiography (ECG) and Reflectance Photoplethysmography (PPG) Signal Processing

Monitoring blood pressure and cardiac function without positioning via a deep learning–assisted strain sensor array

Continuous Artery Monitoring Using a Flexible and Wearable Single-Element Ultrasonic Sensor

Wearable Health Monitoring System using Flexible Materials Electrodes

Clinical Validation of a Wearable Piezoelectric Blood‐Pressure Sensor for Continuous Health Monitoring

Soft Wearable Pressure Sensors for Beat‐to‐Beat Blood Pressure Monitoring