Abstract:Lithium propagation through the solid electrolyte is a main failure mechanism for the all-solid-state lithium-anode battery. Preceding the lithium penetration is a crack formation, i.e., fracture, in the solid electrolyte, providing a passage for lithium to preferentially grow during plating [1,2], due to the field-enhancement effect at the lithium tip [3]. Therefore, it is vital to understand both the crack initiation and lithium propagation for the prediction of the system behaviors, as well as the optimization of the interfacial design. Mathematical modeling is a key tool for the fundamental understanding of the undergoing physical processes. There are several solid-electrolyte fracture models in the literature, but they often treat none or a limited amount of the electrochemical–mechanical couplings. This is despite the fact that high stack pressure, as well as the stress build-up at the lithium/electrolyte interface, necessitate the consideration of stress in the thermodynamic, kinetic, and transport constitutive and governing equations. In particular, the Butler–Volmer equation (or alternative interfacial kinetic expression) must be modified to take into account the stress effects on the reaction kinetics. Furthermore, the incorporation of an appropriate lithium mechanical constitutive behavior is equally important for an accurate depiction of the system behaviors. Consequently, we aim to build a model that brings together (1) rigorous electrochemical–mechanical couplings and (2) appropriate lithium properties at the battery-application length scale to study the crack initiation during battery operation. It features an isolated Gaussian-curved lithium peak in perfect contact with the lithium-lanthanum-zirconium-oxide (LLZO) solid electrolyte. LLZO is treated as an elastic solid, while lithium is modeled as a non-Newtonian fluid. The pseudo-viscosity of lithium is carefully extracted from Haslam et al.’s thin-film compression experiment [4] using the force–displacement relationship in the squeeze-flow experiment. Current flow in the LLZO is treated with Ohm’s law, and the model is solved for a steady-state application of current. Preliminary results show that electrochemical–mechanical couplings strongly influence the model outputs. The stress distribution is intimately intertwined with the interfacial current distribution, which dictates the fracture initiation. Other key sensitivities include the constitutive model for the lithium metal and the asperity geometry. We also aim to present model parameter values that produce an experimentally observed fracture current density of around 1 mA/cm 2 . References [1] Ning, Z. et al. (2021). Visualizing plating-induced cracking in lithium-anode solid electrolyte cells. Nature Materials , 20 (8), 1121–1129. [2] Ning, Z. et al. (2023). Dendrite initiation and propagation in lithium metal solid-state batteries. Nature , 618 (7964), 287–293. [3] Carmona, E. A., & Albertus, P. (2023). Modeling How Interface Geometry and Mechanical Stress Affect Li Metal/Solid Electrolyte Current Distributions. Journal of The Electrochemical Society , 170 (2), 20524. [4] Haslam, C. G. et al. (2022). The effect of aspect ratio on the mechanical behavior of Li metal in solid-state cells. Journal of Power Sources , 520 , 230831.

Modeling electrode-level crack and quantifying its effect on battery performance and impedance

The Influence of Stress-Dependent Overpotential on Dendrite Growth in All-Solid-state Battery with Cracks

Cracking predictions of lithium-ion battery electrodes by X-ray computed tomography and modelling

Modeling storage particle delamination and electrolyte cracking in cathodes of solid state batteries

Modeling of Void‐Mediated Cracking and Lithium Penetration in All‐Solid‐State Batteries

Quantifying the Impact of Charge Rate and Number of Cycles on Structural Degeneration of Li-Ion Battery Electrodes

The Influence of Crack on the Si Anode Performance in Na- and Mg-ion Batteries: an Atomic Multiscale Study

Cohesive Modeling of Crack Nucleation under Diffusion Induced Stresses in a Thin Strip: Implications on the Critical Size for Flaw Tolerant Battery Electrodes

A phase field model coupling lithium diffusion and stress evolution with crack propagation and application in lithium ion batteries.

Unlocking the Electrochemical–Mechanical Coupling Behaviors of Dendrite Growth and Crack Propagation in All‐Solid‐State Batteries

Simulations of dendrite and crack and their interactions in solid electrolyte by phase field method

Unravelling the Impact of Reaction Paths on Mechanical Degradation of Intercalation Cathodes for Lithium-Ion Batteries.

Electrochemical–Mechanical Coupling Is Essential to Predict Solid-Electrolyte Fracture during Li-Metal Plating

Panoramic modeling of lithium dendrite formation and crack penetration in solid-state electrolyte: Mechanism and suppression strategies

Atomic Mechanism of the Distribution and Diffusion of Lithium in a Cracked Si Anode

Numerical Analysis of Degradation and Capacity Loss in Graphite Active Particles of Li-Ion Battery Anodes

A Gaussian Process-Based Crack Pattern Modeling Approach for Battery Anode Materials Design

Visualizing plating-induced cracking in lithium-anode solid-electrolyte cells

Electro-Chemo-Mechanical Model for the Damage in Porous Electrodes of Lithium-Ion Batteries

Modelling of cracks developed in lithium-ion cells under mechanical loading

Origins and Importance of Intragranular Cracking in Layered Lithium Transition Metal Oxide Cathodes