Abstract:Transmission X-ray security scanners are deployed to detect smuggling of contraband articles, including weapons, narcotics, and explosives, for the purposes of homeland security. Current X-ray scanners use a fixed tube voltage (i.e., 160 kV); hence, they have a limitation in detecting thinly coated and/or low-density objects. To overcome this limitation, we are developing an X-ray scanner that applies variable tube voltage according to the physical/chemical properties of the object being inspected. To this end, in our previous study, Monte Carlo simulations with Geant4 (GEometry ANd Tracking4) and MCNP (Monte Carlo N Particle) were performed to optimize the design of the X-ray scanner for variable tube voltages. The MCNP was used to simulate the radiation generator for the X-ray source term, and the Geant4 was used to optimize the design of the dual-energy detector and to obtain the detector counts. In the present study, we experimentally validated the reliability of the Monte Carlo simulation model for the X-ray scanner. An 241 Am source and a radiation generator were employed in this validation. For the 241 Am source, the dual-energy detector signal was measured at a distance of 1 cm from the detector. In the case of the radiation generator, the source-to-object distance and the source-to-detector distance were 70 cm and 120 cm, respectively, as used in a typical X-ray security scanner. The tube voltage and the current were 140 kV and 10 mA, respectively. To obtain the X-ray images, the object was scanned while moving at a speed of 0.2 m/s on a conveyor system. The X-ray source term used in the simulation was obtained by monoenergetic-electron-beam bombardment onto the target. 4-D simulations were performed for the moving object. To validate the simulation model, we compared the simulated and measured image profiles, as well as the pixel counts of the dual-energy detector. The percent differences between the simulated and measured pixel counts and the image profiles were all within 5%. Thus, we concluded that our simulation model for the X-ray scanner can be considered to be reliable.

Simulation method of airborne γ radiation detector response based on the equivalent transformation

A New Hybrid Equivalent Modeling Method of Low-Frequency Radiation Source Based on GS and JADE Algorithms and Phaseless Near-Field Data

An Effective Equivalent Radiation Source Based on Near-field Scanning for Electromagnetic Interference Estimation

Monte Carlo Simulations of Airborne Gamma Spectrometry of Radionuclide in Earth

Equivalent Electromagnetic Hybrid Dipole Based on Cascade-Forward Neural Network to Predict Near-Field Magnitude of Complex Environmental Radiation

A new equivalent radiation source method for the reconstruction of nuclear radiation field

Simulation of a gamma-ray imaging technique using detector response patterns

Monte Carlo simulation of semiconductor-based detector in mixed radiation field in the atmosphere

Monte Carlo Method for Calculating Particle Radiation Detector Correction Factors

A Hybrid Monte Carlo Model for the Energy Response Functions of X-Ray Photon Counting Detectors

Towards Monte Carlo based Full Spectrum Modeling of Airborne Gamma-Ray Spectrometry Systems

A semi-empirical response function for Gamma-ray of Scintillation detector based on physical interaction mechanism

A gamma ray sourceless efficiency calibration method based on the Boolean operation of the ray deposition process

RAPID LEAKAGE SOURCE RECONSTRUCTION METHOD BASED ON BACKWARD ATMOSPHERIC DISPERSION SIMULATION

Experimental validation of Monte Carlo simulation model for X-ray security scanner

3-D Gamma Radiation Field Reconstruction Method Using Limited Measurements for Multiple Radioactive Sources

Simulation analysis of the Compton-to-peak method for quantifying radiocesium deposition quantities

Real-Time Simulation of Clear Sky Background Radiation in Gas Infrared Remote Sensing Monitoring

Geant4 Simulation of Detection Efficiency and Self-Attenuation Effect of Β Particles for Radioxenon Measurement Using Β−γ Coincidence Equipment

Simulation of Parallel Muons Transmission Imaging Using Monte Carlo Method

Response Function Estimation for the XCounter Flite X1 Photon Counting Detector Using Monte Carlo Method