Abstract:It is important to characterize the composition of aerosol particles in air, which causes adverse health effects and millions of deaths each year. Aerosol, or particulate matter (PM), is difficult to characterize because of its wide range of particle sizes; constituents (various organic and inorganic compounds); concentration; morphology; state (liquid or solid); and time-dependent modification. Infrared (IR) spectroscopy is a non-destructive method, which provides useful chemical information about the constituents. Current methods for collecting samples use filters that are made of materials which interferes with the IR spectra and thus lowers detection capabilities. Hence, collection on an IR-transparent substrate is desirable. In order to make a good quantitative measurement of the composition of the aerosol using IR-spectroscopy, a collector design should achieve some objectives. Low size-dependence, low chemical interference, and high collection efficiency are required to collect an aerosol sample that is identical to the aerosol in air. Furthermore, high spatial uniformity in deposition pattern is required to reduce optical artefacts or spectrometer dependence, and high collection mass flux is required to reduce the collection time needed for making a confident claim. Electrostatic precipitation (ESP) is a versatile method of aerosol collection and does not suffer from high pressure drop (which can modify the aerosol chemical composition, for example in filtration), or from bounce-off effects (which preferentially samples the size range and liquids, for example in impaction). ESP devices for particle deposition are present in either a translationally symmetric design (linear system) or a radially symmetric design (radial system). Most ESP designs in the public domain have been designed for different purposes and face limitations for fulfilling objectives stated above. Hence, a new device is necessary to meet performance objectives. Our design is based on an analytical, dimensionless (scalable) mathematical model that embodies the physics of particle migration trajectories due to fluid dynamics and electrostatics that lead to particle capture in a two-stage ESP device. This model allowed us to evaluate the tradeoffs among objectives to arrive at a design optimized across multiple objectives, and across multiple length scales (due to its dimensionless form). We validated this model against numerical simulations using COMSOL Multiphysics software, which is considered to be accurate but can only be run for a limited number of configurations (with respect to geometry and operating parameters) due to its high computational cost. Using the validated analytical model, we investigate the relationship among device geometry, methods of particle introduction, operational parameters, and deposited particle positions (which determines collection efficiency, uniformity, and size dependence), to arrive at a range of designs that meet design criteria. We further report the fabrication of a suitable embodiment using 3D-printing while incorporating ease of operation and handling. Measurement capabilities and limits of the device using different laboratory-generated aerosol are reported.

Theoretical basis of the time-of-flight aerosol spectrometer: a method for monitoring the size distribution of submicron aerosol particles

Size-Resolved Single-Particle Fluorescence Spectrometer for Real-Time Analysis of Bioaerosols: Laboratory Evaluation and Atmospheric Measurements

Aerosol Time-Of-Flight Mass Spectrometer for Measuring Ultrafine Aerosol Particles

A Spectrometer for Measuring Particle Size Distributions in the Range of 3 Nm to 10 Μm

A New Time-of-Flight Aerosol Mass Spectrometer (TOF-AMS)—Instrument Description and First Field Deployment

Method and apparatus for quantitative measurement of aerosol composition using controlled collection of airborne particles

Application and Progress of Single Particle Aerosol Time-of-Flight Mass Spectrometry in Fine Particulate Matter Research

Light Scattering Intensity Field Imaging Sensor for In Situ Aerosol Analysis

Technical Note: Characterization of a Single-Beam Gradient Force Aerosol Optical Tweezer for Droplet Trapping, Phase Transition Monitoring, and Morphology Studies

A Portable Electrical Analyzer for Size Distribution Measurement of Submicron Aerosols

Optically Sizing Single Atmospheric Particulates with a 10-Nm Resolution Using a Strong Evanescent Field.

Robust Inversion Methods for Aerosol Spectroscopy

Sizing Submicron Particles from Optical Scattering Data Collected with Oblique Incidence Illumination.

Overview of measurements and current instrumentation for 1–10 nm aerosol particle number size distributions

Development, Characterization, and Application of a Versatile Single Particle Detection Apparatus for Time-Integrated and Time-Resolved Fluorescence Measurements—Part I: Theoretical Considerations

Numerical Study of Metal Nano-Orifices for Optical Sizing of Ultrafine Particles in Aerosols

Design and Simulation of Aerosol Inlet System for Particulate Matter with a Wide Size Range

A high-resolution mass spectrometer to measure atmospheric ion composition

Modification, calibration, and performance of the Ultra-High Sensitivity Aerosol Spectrometer for particle size distribution and volatility measurements during the Atmospheric Tomography Mission (ATom) airborne campaign

Quantitative Signal Analysis of Sum-Frequency Scattering Experiments from Aerosol Surfaces

Sizing response of the Ultra-High Sensitivity Aerosol Spectrometer (UHSAS) and Laser Aerosol Spectrometer (LAS) to changes in submicron aerosol composition and refractive index