Effect of Al2TiO5 Particle on the Temperature Distribution of Friction Stir Welded Dissimilar Aluminium Composites Using Response Surface Methodology

K. Senthilraj,G. Rajamurugan

DOI: https://doi.org/10.1007/s12666-023-03255-y

2024-01-28

Transactions of the Indian Institute of Metals

Abstract:The present study investigates the peak temperature and temperature distribution of dissimilar friction stir welded (DFSW) AA5052-Al 2 TiO 5 /AA6061-Al 2 TiO 5 composites. The weight percentage (wt.%) of the synthesized Tialite (Al 2 TiO 5 ) particles, tool rotational speed, feed rate, and thermal conductivity (TC) of the composites are considered for this study. The TC of the composites is measured using a KD2 pro decagon devices instrument, and the theoretical TC is calculated by parallel model equation. The peak temperature of DFSW joints is investigated using a central composite design of experiments with three input parameters, namely TRS, feed rate, and wt.% of reinforcements. The results show that the TC of composites decreases with increasing Al 2 TiO 5 wt.%. The maximum peak temperature of 474 °C is obtained for 1400 rpm TRS, 30 mm/min feed rate, and 1 wt.% (W13). The minimum peak temperature of 377 °C is obtained for 1000 rpm TRS, 50 mm/min feed rate, and a 3 wt.% Al 2 TiO 5 (W2). The structural analysis reveals that the samples W5, W10, W11, W12, and W15 exhibit defect-free DFSW joints with peak temperatures ranging from 447 °C to 452 °C. Additionally, X-ray diffraction analysis confirms the presence of Al 2 TiO 5 particles in the DFSW stir zone, and the phase intensity variation confirms that mono-synthesized Al 2 TiO 5 wt.% and TRS play a significant role in temperature distribution and peak temperature of DFSW joints.

metallurgy & metallurgical engineering