Abstract:Treatment of highly contaminated wastewaters containing refractory or toxic organic contaminants (e.g. industrial wastewaters) is becoming a global challenge. Most technologies focus on efficient degradation of organic contaminants. Here we improve the cathode/FeIII/peroxydisulfate (PDS) technology by turning down the current density and develop an innovative mechanism for organic contaminants abatement, namely polymerization rather than degradation, which allows simultaneous contaminants removal and resource recovery from wastewater. This polymerization leads to organic-particles (suspended solid organic-polymers) formation in bulk solution, which is demonstrated by eight kinds of representative organic contaminants. Taking phenol as a representative, 83% of PDS is saved compared to degradation process, with 87.2% of DOC removal. The formed suspended solid organic-polymers occupy 59.2% of COD of the original organics in solution, and can be easily separated from aqueous solution by sedimentation or filtration. The separated organic-polymers are a series of polymers coupled by phenolic monomers, as confirmed by FTIR and ESI-MS analyzes. The energy contained in the recovered organic polymers (4.76 × 10-5 kWh for 100 mL of 1 mM phenol solution in this study) can fully compensate the consumed electrical energy (2.8 × 10-5 kWh) in the treatment process. A representative polymerization model for this process is established, in which the SO4•- and HO• generated from PDS activation initiate the polymerization and improve the polymerization degree by the production of oligomer intermediates. A practical coking wastewater treatment is carried out to verify the research results and get positive feedback, with 56.0% of DOC abatement and the suspended solid organic-polymers accounts for 42.5% of the total COD in the raw wastewater. The energy consumption (47 kWh/kg COD, including electricity and PDS cost) is lower than the values in previous reports. This study provides a novel method for industrial wastewater treatment based on polymerization mechanism, which is expected to recover resources while removing pollutants with low consumption.

Drinking water treatment residue recycled to synchronously control the pollution of polycyclic aromatic hydrocarbons and phosphorus in sediment from aquatic ecosystems

The feasibility of recycling drinking water treatment residue as suspended substrate for the removal of excess P and N from natural water

Enhancing wastewater remediation by drinking water treatment residual-augmented floating treatment wetlands

The sequential dewatering and drying treatment enhanced the potential favorable effect of microbial communities in drinking water treatment residue for environmental recycling

Evaluating drinking water treatment residuals as an in-situ capping material for metal-contaminated sediments

A novel remediation strategy of mixed calcium peroxide and degrading bacteria for polycyclic aromatic hydrocarbon contaminated water

Resuspension and settlement characteristics of lake sediments amended by phosphorus inactivating materials: Implications for environmental remediation

Combining physico-chemical analysis with a Daphnia magna bioassay to evaluate a recycling technology for drinking water treatment plant waste residuals

Organic matter from water treatment residuals stabilizes amorphous iron to maintain phosphorus adsorption by iron hydroxides

High efficiency of drinking water treatment residual-based sintered ceramsite in biofilter for domestic wastewater treatment

Enhanced bioremediation of sediment contaminated with polycyclic aromatic hydrocarbons by combined stimulation with sodium acetate/phthalic acid

Enhanced removal of heavy metals and phosphate in stormwater filtration systems amended with drinking water treatment residual-based granules

Re-utilization of drinking water treatment residuals (DWTR): A review focused on the adsorption of inorganic and organic contaminants in wastewater and soil

Controlled mechanism and removal performance of phosphorus in black and odorous water bodies by Fe-based layered double hydroxides

Treating carbon-limited wastewater by DWTR and woodchip augmented floating constructed wetlands

Treatment of contaminants by a cathode/FeIII/peroxydisulfate process: Formation of suspended solid organic-polymers

Making waves: Breaking the bottleneck of recycling drinking water treatment residue for practical engineering applications in water pollution control

Simultaneous Improvement of Water/Fertility Retention and Physical Properties of Dredged Sediment Using a Novel Composite Amendment

Effectiveness of a drinking-water treatment sludge in removing different phosphorus species from aqueous solution

Transforming Drinking Water Treatment Residuals into Efficient Adsorbents: A Review of Activation and Modification Methods

Effective removal of fluoride and lead ions from aqueous solutions using water treatment residue and rice straw co-pyrolysis biochar composites