Abstract:Low-altitude unmanned aerial vehicle (UAV) photogrammetry combined with structure-from-motion (SFM) algorithms is the latest technological approach to imaging 3D stereo constructions. At present, derivative products have been widely used in landslide monitoring, landscape evolution, glacier movement, volume measurement, and landscape change detection. However, there is still a lack of research into the accuracy of 3D data positioning based on the structure-from-motion of unmanned aerial vehicle (UAV-SFM) technology, itself, which can affect the measurable effectiveness of the results in further applications of this technological approach. In this paper, validation work was carried out for the DJI Phantom 4 RTK UAV, for earth observation data related to 3D positioning accuracy. First, a test plot with a relatively stable surface was selected for repeated flight imaging observations. Specifically, three repeated flights were performed on the test plot to obtain three sorties of images; the structure from motion and multi-view stereo (SFM-MVS) key technology was used to process and construct a 3D scene model, and based on this model the digital surface model (DSM) and digital orthophoto map (DOM) data of the same plot with repeated observations were obtained. In order to check the level of 3D measurement accuracy of the UAV technology itself, a window selection-based method was used to sample the point cloud set data from the three-sortie repeat observation 3D model. The DSM and DOM data obtained from three repeated flights over the surface invariant test plots were used to calculate the repeat observation 3D point errors, taking into account the general methodology of redundant observation error analysis for topographic surveys. At the same time, to further analyze the limits of the UAV measurement technique, possible under equivalent observation conditions with the same processing environment, a difference model (DOD) was constructed for the DSM data from three sorties, to deepen the overall characterization of the differences between the DSMs obtained from repeated observations. The results of the experimental study concluded that both the analysis of the 3D point set measurements based on window sampling and the accuracy evaluation using the difference model were generally able to achieve a centimeter level of planimetric accuracy and vertical accuracy. In addition, the accuracy of the surface-stabilized hardened ground was better, overall, than the accuracy of the non-hardened ground. The results of this paper not only probe the measurement limits of this type of UAV, but also provide a quantitative reference for the accurate control and setting of an acquisition scheme of the UAV-based SfM-MVS method for geomorphological data acquisition and 3D reconstruction.

Estimation of dump and landfill waste volumes using unmanned aerial systems

Digital topographic mapping and modelling using low altitude unmanned aerial vehicle

Experimental Study on 3D Measurement Accuracy Detection of Low Altitude UAV for Repeated Observation of an Invariant Surface

The use of budget UAV systems and GIS spatial analysis in cadastral and construction surveying for building planning

Surface Monitoring of an MSW Landfill Based on Linear and Angular Measurements, TLS, and LIDAR UAV

Application of Low-cost Unmanned Aerial Vehicle in 3D Modelling of Large Scale Geotechnical Engineering:Case Study of High Filling Engineering of Airport in Mountain Area of Southwest China

Analysis of UAV Flight Patterns for Road Accident Site Investigation

UAV-based approach for municipal solid waste landfill monitoring and water ponding issue detection using sensor fusion

Lightweight UAV digital elevation models and orthoimagery for environmental applications: data accuracy evaluation and potential for river flood risk modelling

Impact of UAV Surveying Parameters on Mixed Urban Landuse Surface Modelling

Accuracy analysis of UAV photogrammetry using RGB and multispectral sensors

Digital Terrain Models Generated with Low-Cost UAV Photogrammetry: Methodology and Accuracy

Performance and precision analysis of 3D surface modeling through UAVs: validation and comparison of different photogrammetric data processing software.

Figure Volume Calculation Based on Lidar Scanning Technology

Automatic Volume Calculation and Mapping of Construction and Demolition Debris Using Drones, Deep Learning, and GIS

Vision-Based On-Site Construction Waste Localization Using Unmanned Aerial Vehicle

Comparative analysis of surface deformation monitoring in a mining area based on UAV‐lidar and UAV photogrammetry

Performing low-altitude photogrammetric surveys, a comparative analysis of user-grade unmanned aircraft systems

Capabılıtıes of usıng UAVs to determıne forest road excavatıon volumes ın mountaınous areas

Quality of Terrestrial Data Derived from UAV Photogrammetry: A Case Study of Hetao Irrigation District in Northern China

First Unmanned Aerial Vehicle Airborne Gravimetry Based on the CH-4 UAV in China