Comparison of 5G‐IoT antenna performance by using four distinct dielectric materials to verify their efficiencies
Kaushal Mukherjee,Sahadev Roy
DOI: https://doi.org/10.1002/dac.5877
2024-06-14
International Journal of Communication Systems
Abstract:The novel characterization technique of different materials using ring resonator technique, along with a comparison of antenna performance using standard and measured dielectric constant (εr ) and loss tangent (tanδ ) values, is presented in this study. Further, the materials are utilized as the substrate for a printed single layer Y‐Shape 5G‐IoT antenna in order to validate the measured results. This novel characterization technique can be useful for researchers to characterize materials, especially at higher frequencies like mmWave 5G communication bands. Summary The characterization of four different materials, Taconic (D1), FR4 (D2), Lab material (D3), and Created material (D4) using the ring resonator technique, is presented in this study along with a comparison of antenna performance using standard and measured dielectric constant (εr ) and loss tangent (tanδ ) values. This article discussed the comparison of antenna performances on four distinct dielectric materials to verify their efficiencies. Standard values of εr for the reported materials are 2.20, 4.40, 2.33, and 10.45 for D1, D2, D3, and D4, respectively, with corresponding tanδ values of 0.0009, 0.02, 0.0012, and 0.00032. The εr and tanδ for the materials D1, D2, D3, and D4 are calculated as 2.10, 4.56, 2.51, and 9.89 and 0.00094, 0.01927, 0.0013, and 0.0003025, respectively, using a ring resonator. The materials are utilized as the substrate for a printed single layer Y‐Shape 5G‐IoT antenna in order to validate the measured results. According to the findings of this study, the measurement of εr using the resonator approach exhibited errors of 4.54%, 3.63%, 7.82%, and 5.33%, respectively, while the tanδ has errors of 04.44%, 03.65%, 08.33%, and 5.47% for materials D1, D2, D3, and D4, respectively. The outcomes of this work include the numerical calculation of the εr and tanδ of four materials and the validation of the measured values using a Y‐Shape 5G‐IoT antenna in the millimeter‐wave 5G frequency bands. Additionally, the values calculated mathematically are compared with the values obtained from the conventional ring resonator.
telecommunications,engineering, electrical & electronic