Abstract:Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Ahead of Print. In this paper, an explicit dynamic model for the 6-DOF Stewart platform parallel manipulator is established using a new formulation. The main principle of this formulation is to provide the final form of dynamic models based on a direct and systematic procedure; in more detail, the analytical expression of each term due to the dynamic effects, that is, the system inertia tensor, centrifugal/Coriolis tensor and the environment forces are developed according to only the physical parameters of the system (i.e., mass, inertia tensor, position of the center of mass and geometrical parameters) and generalized coordinates without the need for any complicated intermediate calculations such as the potential, kinetic and acceleration energy development. In this approach, the parallel manipulator is first opened into six serial legs and a free platform. Next, the dynamic models of each sub-structure can be easily obtained based on the new formulation in their own local space. The Jacobian and Hessian matrices of the constraint equations, resulting from the closed-loop chains, are then used to combine the substructure dynamics. Finally, a detailed dynamics model of the entire robot with respect to the workspace or the actuation space is developed. After that, a simulation of the suggested methodology is investigated and analyzed in comparison to the more established dynamic modeling techniques provided in the literature; the efficiency and correctness of our approach are then verified. It is shown that our method requires a lower computational cost and even competes with the implicit form of dynamic models. Finally, a trajectory-tracking problem using model-based control is presented. It is shown that our approach can be totally and efficiently computed online without the need for symbolic form of equations of motion, which is highly challenging for parallel manipulators.

Using a Development Platform with an STM32 Processor to Prototype an Inexpensive 4-DoF Delta Parallel Robot

Research on the Operating Characteristics of Parallel 4-DOF Electric Platform with 4TPS-PS Structure

Dynamic Modeling and Robust Control in Task Space of 4-DOF Parallel Electric Platform with 4TPS-1PS Structure

Kinetostatic characters of parallel 4-DOF platform with 4TPS-PS structure

Design and development of a Schönflies-motion parallel robot with articulated platforms and closed-loop passive limbs

Kinematic and singularity analysis of a 4-DOF Delta-type parallel robot

Dynamic Modeling and Control Simulation of a Modified Delta Manipulator.

Development of interface for kinematic analysis of a delta-type parallel robot

Design and Kinematic Analysis of the Parallel Robot 4-DoF SCARA

Mechatronic Design, Experimental Setup and Control Architecture Design of a Novel 4 DoF Parallel Manipulator

Design and implementation of a field robot using a parallelogram mechanism

Modeling, design and control of a 4-arm delta parallel manipulator employing type-1 and interval type-2 fuzzy logic-based techniques for precision applications

Concept Design Of Novel 2-Dof Parallel Robots With Spatial Kinematic Chains Based On A Heuristic Strategy

Kinematic Analysis and Trajectory Planning of Two-Limb 4-DOF High-Speed Parallel Robot

An Experimental Investigation of the Dynamic Performances of a High Speed 4-DOF 5R Parallel Robot Using Inverse Dynamics Control

Kinematic and Performance Analysis of a 4-DOF 2pppar Parallel Manipulator

A Design of a 2-DoF Planar Parallel Manipulator with an Electro-Pneumatic Servo-Drive

Synchronous PD Control Using a Time Delay Estimator for a Four-Degree-of-Freedom Parallel Robot in Practice

Upside down: affordable high-performance motion platform

Design and Development of a Portable Machining Robot with Parallel Kinematics*

An efficient explicit dynamic formulation of a Stewart platform parallel robot via new formalism