Mercury emission profile for the torrefaction of sewage sludge at a full-scale plant and application of polymer sorbent

Yingchao Cheng,Yuki Asaoka,Yoshiyuki Hachiya,Naoki Moriuchi,Kenji Shiota,Kazuyuki Oshita,Masaki Takaoka
DOI: https://doi.org/10.1016/j.jhazmat.2021.127186
2022-02-05
Abstract:We evaluated mercury (Hg) behavior in a full-scale sewage sludge torrefaction plant with a capacity of 150 wet tons/day, which operates under a nitrogen atmosphere at a temperature range of 250-350 °C. Thermodynamic calculations and monitoring results show that elemental Hg (Hg0) was the dominant species in both the pyrolysis gas during the torrefaction stage and in the flue gas from downstream air pollution control devices. A wet scrubber (WS) effectively removed oxidized Hg from the flue gas and moved Hg to wastewater, and an electrostatic precipitator (ESP) removed significant particulate-bound Hg but showed a limited capacity for overall Hg removal. Hg bound to total suspended solids had a much higher concentration than that of dissolved Hg in wastewater. Total suspended solid removal from wastewater is therefore recommended to reduce Hg discharge. Existing air pollution control devices, which consist of a cyclone, WS, and ESP, are not sufficient for Hg removal due to the poor Hg0 removal performance of the WS and ESP; a further Hg0 removal unit is necessary. A commercial packed tower with sorbent polymer catalyst composite material was effective in removing Hg (83.3%) during sludge torrefaction.
What problem does this paper attempt to address?