Abstract:This study focuses on the development of a piezoelectric device capable of generating feedback vibrations to the user who manipulates it. The objective here is to explore the possibility of developing a haptic system that can replace physical buttons on the tactile screen of in-car systems. The interaction between the user and the developed device allows completing the feedback loop, where the user's action generates an input signal that is translated and outputted by the device, and then detected and interpreted by the user's haptic sensors and brain. An FEM (finite element model) via ANSYS multiphysics software was implemented to optimize the haptic performance of the wafer structure consisting of a BaTiO3 multilayered piezocomposite coated on a PET transparent flexible substrate. Several parameters relating to the geometric and mechanical properties of the wafer, together with those of the electrodes, are demonstrated to have significant impact on the actuation ability of the haptic device. To achieve the desired vibration effect on the human skin, the haptic system must be able to drive displacement beyond the detection threshold (~2 µm) at a frequency range of 100-700 Hz. The most optimized actuation ability is obtained when the ratio of the dimension (radius and thickness) between the piezoelectric coating and the substrate layer is equal to ~0.6. Regarding the simulation results, it is revealed that the presence of the conductive electrodes provokes a decrease in the displacement by approximately 25-30%, as the wafer structure becomes stiffer. To ensure the minimum displacement generated by the haptic device above 2 µm, the piezoelectric coating is screen-printed by two stacked layers, electrically connected in parallel. This architecture is expected to boost the displacement amplitude under the same electric field (denoted E) subjected to the single-layered coating. Accordingly, multilayered design seems to be a good alternative to enhance the haptic performance while keeping moderate values of E so as to prevent any undesired electrical breakdown of the coating. Practical characterizations confirmed that E=20 V/μm is sufficient to generate feedback vibrations (under a maximum input load of 5 N) perceived by the fingertip. This result confirms the reliability of the proposed haptic device, despite discrepancies between the predicted theory and the real measurements. Lastly, a demonstrator comprising piezoelectric buttons together with electronic command and conditioning circuits are successfully developed, offering an efficient way to create multiple sensations for the user. On the basis of empirical data acquired from several trials conducted on 20 subjects, statistical analyses together with relevant numerical indicators were implemented to better assess the performance of the developed haptic device.

Where's My Button? Evaluating the User Experience of Surface Haptics in Featureless Automotive User Interfaces

HapWheel: In-Car Infotainment System Feedback Using Haptic and Hovering Techniques

User-Experience with Haptic Feedback Technologies and Text Input in Interactive Multimedia Devices

An Exploratory Expert-Study for Multi-Type Haptic Feedback for Automotive Virtual Reality Tasks

The influence of tactile feedback in In-vehicle central control interfaces on driver emotions: A comparative study of touchscreens and physical buttons

Haptic Feedback Device Using 3D-Printed Flexible, Multilayered Piezoelectric Coating for In-Car Touchscreen Interface

Evaluating secondary input devices to support an automotive touchscreen HMI: A cross-cultural simulator study conducted in the UK and China

HapWheel: Bringing In-Car Controls to Driver’s Fingertips by Embedding Ubiquitous Haptic Displays into a Steering Wheel

In-Vehicle Human Machine Interface: Investigating the Effects of Tactile Displays on Information Presentation in Automated Vehicles

Perceived Depth and Roughness of Virtual Buttons with Touchscreens

PopTouch: A Submillimeter Thick Dynamically Reconfigured Haptic Interface with Pressable Buttons

Surface haptic rendering of virtual shapes through change in surface temperature

Physical and behavioral comparison of haptic touchscreens quality

Haptic Stylus and Empirical Studies on Braille, Button, and Texture Display

Evaluating Force-based Haptics for Immersive Tangible Interactions with Surface Visualizations

Acceptance and Usability of a Soft Robotic, Haptic Feedback Seat for Autonomy Level Transitions in Highly Automated Vehicles

A Design Space for Human Sensor and Actuator Focused In-Vehicle Interaction Based on a Systematic Literature Review

Haptic Feedback for the Transfer of Control in Autonomous Vehicles

The user experience of distal arm-level vibrotactile feedback for interactions with virtual versus physical displays

A Wearable Virtual Touch System for Cars

Slickfeel: Sliding And Clicking Haptic Feedback On A Touchscreen