Nuclear steroid binding in rat adrenal gland.

R. Calandra,L. Finocchiaro,I. Luthy,R. Cheb Terrab

Abstract:

What problem does this paper attempt to address?

Phytic acid-functionalized polyamidoxime/alginate hydrogel for targeted uranium extraction from acidic wastewater

Zhongran Dai,Huinan Wu,Lijie Chen,Yuan Gao,Le Li,Dexin Ding

DOI: https://doi.org/10.1016/j.carbpol.2024.122283

2024-09-01

Abstract:Efficient removal of uranium from radioactive wastewater is crucial for both environmental protection and sustainable development of nuclear energy. However, selectively extracting uranium from acidic wastewater remains a significant challenge. Here we present a phytic acid-functionalized polyamidoxime/alginate hydrogel (PAG) via a facile one-step hydrothermal reaction. The PAG, leveraging the robust binding affinity of phytic acid and the selective coordination of amidoxime for U(VI), exhibited high efficiency and selectivity in adsorbing U(VI) from acidic uranium-containing wastewater. At pH 2.50, U(VI) adsorption equilibrium was achieved within 60 min, showcasing a maximum theoretical adsorption capacity of 218.34 mg/g. Additionally, the PAG demonstrated excellent reusability, maintaining a uranium removal rate exceeding 90 % over five adsorption-desorption cycles. Remarkably, the as-synthesized PAG removed 94.1 % of U(VI) from actual acidic uranium-contaminated groundwater with excellent anti-interference performance, reducing U(VI) concentration from 272.0 μg/L to 16.1 μg/L and making it meet the WHO drinking water standards (30 μg/L). The adsorption mechanism was elucidated through XPS and DFT calculation, revealing that the uranyl ion primarily coordinated with phosphate and amidoxime groups on phytic acid and polyamidoxime, respectively. These findings underscore the promising potential of PAG hydrogel for addressing acidic uranium-containing wastewater from uranium mining and metallurgy.
Synthesis of amidoximated polyacrylonitrile/sodium alginate composite hydrogel beed and its use in selective and recyclable removal of U(VI)

Bingyu Zhu,Le Li,Zhongran Dai,Shuangyang Tang,Deshuai Zhen,Lin Sun,Lei Chen,Chen Tuo,Ziwei Tang

DOI: https://doi.org/10.1007/s10967-022-08233-0

2022-02-24

Journal of Radioanalytical and Nuclear Chemistry

Abstract:In this study, a novel type of composite hydrogel bead (PSH) was prepared by mixing of amidoximated polyacrylonitrile (PAO) and sodium alginate (SA). The structure of PSH was characterized with FT-IR, SEM and XPS. The influences of adsorption conditions on uranium(VI) adsorption by PSH were investigated by batch experiments. The kinetic and isotherm data were consistent with pseudo-second-order and Langmuir models, respectively. PSH displayed high selective adsorption capacity for uranium(VI). The maximum adsorption amount can reach 133.33 mg g−1. PSH was separated from aqueous solution easy and showed an excellent regeneration capacity. This research demonstrated that PSH had a broad prospect of application in the field of repairing uranium-containing wastewater.

chemistry, inorganic & nuclear, analytical,nuclear science & technology
Carboxymethylcellulose-based zwitterionic cryogels for efficient U(VI) extraction from water

Xu Zhang,Dongxiang Zhang,Dagang Li,Shusen Chen,Fengqi Zhang,Zilei Zhang,Haocun Tan,Le Yang,Jinzheng Hou,Runchao Tan,Jinying Li,Xiyan Xu

DOI: https://doi.org/10.1016/j.seppur.2024.127485

IF: 8.6

2024-04-17

Separation and Purification Technology

Abstract:Carboxymethylcellulose-based zwitterionic cryogels (AO-PAM/CMC) with a supermacroporous pore structure were prepared through cryo-polymerization and post-modification strategies. The hydrogel exhibited a supermacroporous structure, excellent hydrophilicity, superior mechanical properties, and resistance to biological contamination. Through a comprehensive investigation of the U(VI) adsorption process, it was observed that the AO-PAM/CMC hydrogel was predominantly characterized by chemisorption, wherein uranyl ions were adsorbed on the surface in the form of a monolayer. Under the conditions of 45 °C and pH = 5.0, the hydrogel demonstrated remarkable adsorption performance, with the maximum adsorption capacity reaching 1223.6 mg∙g −1 , showcasing a high degree of selectivity for U(VI). In real seawater, the hydrogel's adsorption capacity for uranium reached 12.95 mg∙g −1 after 25 days of exposure, with the adsorption equilibrium being essentially reached in about 10 days. The adsorption mechanism of U(VI) by the hydrogel was confirmed through XPS spectroscopy and DFT calculations. The synergistic interplay between guanidino and zwitterionic moieties within the AO-PAM/CMC hydrogel enhanced U(VI) adsorption capacity and facilitated rapid uranium extraction from seawater. (UES). Therefore, the AO-PAM/CMC hydrogel presents a novel solution to address the inefficiencies of existing technologies for uranium extraction from seawater, contributing an innovative approach to the sustain-able development of nuclear energy.

engineering, chemical
Fabrication of a Novel Electrospun Polyvinyl Alcohol/polyacrylic Acid Nanofiber Adsorbent Loading with Montmorillonite or Zeolite for Uranium (VI) Removal

Li Zhuyao,Tang Dandan,Dai Ying,Zou Rong,Liu Hui,Tao Qinqin,Liu Zhirong

DOI: https://doi.org/10.1007/s10967-021-08092-1

2021-01-01

Journal of Radioanalytical and Nuclear Chemistry

Abstract:A novel combined technology involving electrospinning, and hydrothermal tactics was developed to fabricate polyvinyl alcohol/polyacrylic acid (PVA/PAA) superhydrophilic nanofibers supported on montmorillonite (MMT) or zeolite. A series of structural characterizations and activity measurements demonstrate that the montmorillonite or zeolite support can significantly decrease the mean nanofiber diameter, resulting in more abundant active sites toward the adsorption of uranium. The maximum monolayer sorption capacity for MMT/PVA/PAA and zeolite/PVA/PAA nanofibers reached as high as 170.53 and 205.75 mg/g, respectively. Five adsorption and desorption cycle experiments demonstrated that the synthetic materials possessed good renewable performance.
Hierarchical build-up of vertically oriented lignin-based aerogel for photothermally assisted uranium uptake and recovery from acidic wastewater

Gao-Jie Jiao,Jiliang Ma,Jinguang Hu,Xing Wang,Runcang Sun

DOI: https://doi.org/10.1016/j.jhazmat.2023.130988

IF: 13.6

2023-02-16

Journal of Hazardous Materials

Abstract:Developing the lignin-based functional materials for uranium uptake is extremely attractive, but challenging due to the complex structure, poor solubility and reactivity of lignin. Herein, a novel phosphorylated lignin (LP)/sodium alginate/ carboxylated carbon nanotube (CCNT) composite aerogel () with vertically oriented lamellar configuration was created for efficient uranium uptake from acidic wastewater. The successful phosphorylation of lignin by a facile solvent-free mechanochemical method achieved more than six-times enhancement in U(VI) uptake capacity of lignin. While, the incorporation of CCNT not only increased the specific surface area of , but also improved its mechanical strength as a reinforcing phase. More importantly, the synergies between LP and CCNT components endowed with an excellent photothermal performance, resulting in a local heat environment on and further boosting the U(VI) uptake. Consequently, the light irradiated exhibited an ultrahigh U(VI) uptake capacity (1308.87 mg g −1 ), 61.26% higher than that under dark condition, excellent adsorptive selectivity and reusability. After exposure to 10 L of simulated wastewater, above 98.21% of U(VI) ions could be rapidly captured by under light irradiation, revealing the tremendous feasibility in industrial application. The electrostatic attraction and coordination interaction were considered as the main mechanism for U(VI) uptake.

environmental sciences,engineering, environmental
Tough, self-healing, and freeze-resistant composite dual-network hydrogels for the decontamination of surface uranium (VI)

Chuanyi Ma,Jian Li,Yi Wang,Zhanguo Li

DOI: https://doi.org/10.1016/j.colsurfa.2024.135682

IF: 5.518

2024-11-03

Colloids and Surfaces A Physicochemical and Engineering Aspects

Abstract:Hydrogels have attracted widespread attention in the field of surface radioactivity decontamination due to their mild and rapid decontamination processes, as well as their tunable properties. However, fabricating decontamination hydrogels with suitable mechanical properties and environmental adaptability remains challenging. In this study, a tough and freeze-resistant hydrogel (PEAG) was prepared based on graphene oxide (GO), polyvinyl alcohol (PVA), agar (AG), and ethylene glycol (EG) for efficient removal of surface radioactive uranium (VI). Due to the dynamic action of borax and the formation of a nanocomposite dual-network structure, PEAG possesses improved modulus and excellent self-healing properties, allowing the hydrogel to be easily applied to surfaces and to perform operations such as stretching and peeling. In addition, it is found that the PEAG achieves excellent decontamination rates for radioactive uranium (VI) on glass (88.53±1.43 %), stainless steel (86.72±3.41 %), rubber (67.0±2.43 %), ceramics (82.39±1.78 %), and cement (64.52±1.72 %) surfaces, respectively. XPS and contact angle experiments demonstrated that the improved decontamination performance of PEAG is mainly due to the abundant hydroxyl and carbonyl functional groups in the graphene oxide adsorbent, which provide a rich source of complexation sites and enhance its hydrophilic properties for PEAG. Additionally, due to the incorporation of EG, the PEAG hydrogel exhibits good environmental adaptability, which can retain internal moisture and maintain softness and decontamination stability at low temperatures of −20°C. Therefore, PEAG hydrogel is a promising and sustainable candidate material for various surface radioactive decontamination scenarios.

chemistry, physical
Selective adsorption of uranium (VI) from wastewater using a UiO-66/calcium alginate/hydrothermal carbon composite material

Siqian Wen,Hongqiang Wang,Qi Xin,Eming Hu,Zhiwu Lei,Fang Hu,Qingliang Wang

DOI: https://doi.org/10.1016/j.carbpol.2023.120970

IF: 10.723

2023-05-07

Carbohydrate Polymers

Abstract:Uranium mining, smelting, and nuclear industries generate a considerable amount of wastewater containing uranium. To treat this wastewater effectively and inexpensively, a novel hydrogel material (cUiO-66/CA) was developed by co-immobilizing UiO-66 with calcium alginate and hydrothermal carbon. Batch tests were conducted to determine the optimal adsorption conditions for uranium using cUiO-66/CA, and the adsorption behavior was spontaneous and endothermic, confirming the quasi-second-order dynamics model and the Langmuir model. At a temperature of 308.15 K and pH = 4, the maximum adsorption capacity of uranium was 337.77 mg g −1 . The surface appearance and interior structure of the material were analyzed using SEM, FTIR, XPS, BET, and XRD techniques. The results indicated two possible uranium adsorption processes of cUiO-66/CA: (1) Ca 2+ and UO 2 2+ ion exchange process and (2) coordination of uranyl ions with hydroxyl and carboxyl ions to form complexes. cUiO-66/CA exhibited strong selectivity for U (VI) in a multicomponent mixed solution and uranium-containing wastewater, with uranium removal rates of 99.03 % and 81.45 %, respectively. The hydrogel material demonstrated excellent acid resistance, and the uranium adsorption rate exceeded 98 % in the pH range of 3–8. Therefore, this study suggests that cUiO-66/CA has the potential to treat uranium-containing wastewater in a broad pH range.

polymer science,chemistry, organic, applied
Alginate-based supermacroporous hydrogel fabricated by cryo-polymerization for uranium extraction from seawater

Xu Zhang,Dagang Li,Chang Cui,Shusen Chen,Meng Ji,Weiwu Tang,Le Yang,Fengqi Zhang,Jinying Li,Dongxiang Zhang,Xiyan Xu

DOI: https://doi.org/10.1039/d3py00529a

IF: 4.6

2023-05-25

Polymer Chemistry

Abstract:Uranium extraction from seawater (UES) has important strategic significance as it can provide a solution to alleviate the future shortage of uranium resources for nuclear power production. This work reports an alginate-based three-dimensional (3D) supermacroporous fabricated by facile cryo-polymerization and two-step grafting modification (AO-PAM/Alg) hydrogel for efficient UES. The supermacroporous and 3D interconnected pore structure of AO-PAM/Alg facilitate an increased contact flux of seawater and the diffusion rate of uranyl ions. It shows a maximum uranium adsorption capacity of 1375 mg/g at room temperature (25°C and pH of 6.0). In seawater, AO-PAM/Alg reaches adsorption equilibrium within 20 days, with the final adsorption capacity of 6.23 mg/g. AO-PAM/Alg also exhibits considerable reusability and adsorption selectivity. The current AO-PAM/Alg hydrogel holds great potential for practical UES. And the current macroporous adsorbent preparation strategy can be further applied to other 3D supermacroporous adsorbent materials.

polymer science
A thermal-responsive hydrogel to capture uranium(VI) from aqueous solution: properties and mechanism

Chenjing Dai,Cheng Meng,Shujuan Liu,Jianqiang Luo,Ranjie Fang,Shufan Lu,Guorong Wu,Jianguo Ma,Ma, Jianguo

DOI: https://doi.org/10.1007/s10967-023-09141-7

2023-10-01

Journal of Radioanalytical and Nuclear Chemistry

Abstract:In this study, a thermal-responsive hydrogel, sodium alginate/polyamidoxime/poly(N-isopropylacrylamide) hydrogel (SA/PAO/PNIPAm), was prepared via radical polymerization. The uranium (U) capturing properties of the hydrogel were investigated. The results reveal that SA/PAO/PNIPAm can effectively remove U(VI) from aqueous solution, and the maximal adsorption capacity was calculated to be 319.49 mg g −1 at 305.15 K and pH 5.0. Furthermore, the adsorption mechanism was revealed by X-ray photoelectron spectroscopy analysis and density functional theory simulations. In particular, high desorption efficiency was observed by changing the desorption temperature, which could reduce secondary pollutants in elution process.

chemistry, inorganic & nuclear, analytical,nuclear science & technology
Synergistic improvement of mechanical and adsorption property by constructing physical multiple-network hydrogel for removing uranium

Lili Liang,Xingbao Yang,Xuan Liang,Xiaoyan Lin,Hao Zhang,Chunxia Pang,Xunhai Pan,Yang Hu,Yan Chen,Xuegang Luo

DOI: https://doi.org/10.1016/j.molstruc.2023.137046

IF: 3.841

2023-11-11

Journal of Molecular Structure

Abstract:Biomass hydrogels, a kind of favorable adsorbents, have been applied extensively in uranium removal due to its three-dimensional network structure. However, it usually can not maintain good mechanical properties and adsorption properties simultaneously. Furthermore, chemical hydrogels, due to the usage of hazardous chemical crosslinkers and initiators, would inevitably result in secondary environmental pollution during its preparation. To improve the poor mechanical property of biomass polymer gellen gum (GG) as an adsorbent, while maintaining its good adsorption capacity, a multiple-network hydrogel (GG-CS-Ca) was physicallly constructed by self-assembly using GG and another cationic polyelectrolyte chitosan (CS) together with Ca 2+ in this work. The structure, morphology and stability were disclosed by FTIR, SEM, EDS, XPS and TG analysis. Furthermore, its adsorption properties were systematically investigated by static and dynamic adsorption testing. The results indicated that the mechanical strength of GG-CS-Ca was improved compared with as-prepared adsorbent GG-Ca while its adsorption capacity maintained at a higher level which was twice of the mechanically reinforcing GG-based adsorbent GG-CMKGM. It indeed achieved the synergistic improvement of mechanical strength and adsorption capacity. Moreover, it showed favorable acid-resistant stability because of the electrostatic crosslinking of negative GG and positive CS under high acidic condition. The dynamic adsorption analysis certified that it could be applied in actual uranium removing as an adsorbent and the application parameter could be predicted by Thomas and Yoon-Nelson model.

chemistry, physical
MOF-implanted poly (acrylamide- co -acrylic acid)/chitosan organic hydrogel for uranium extraction from seawater

Yucheng Song,Hui Li,Tianhang Shan,Peipei Yang,Songwei Li,Zhong Liu,Chuntai Liu,Changyu Shen

DOI: https://doi.org/10.1016/j.carbpol.2022.120377

IF: 10.723

2022-11-22

Carbohydrate Polymers

Abstract:In this study, a composite hydrogel with a low swelling ratio, excellent mechanical properties, and good U (VI) adsorption capacity was developed by incorporating a metal-organic framework (MOF) with a poly (acrylamide- co -acrylic acid)/chitosan (P(AM-co-AA)/CS) composite. The CS chain, which contains NH 2 , reduces the swelling ratio of the hydrogel to 4.17 after 5 h of immersion in water. The coordinate bond between the MOF and carboxyl group on the surface of P(AM-co-AA)/CS improves the mechanical properties and stability of P(AM-co-AA)/CS. The U(VI) adsorption capacity of P(AM-co-AA)/CS/MOF-808 is 159.56 mg g −1 at C 0 = 99.47 mg L −1 and pH = 8.0. The adsorption process is well fitted by the Langmuir isotherm and pseudo-second-order model. The P(AM-co-AA)/CS/MOF-808 also exhibits good repeatability and stability after five adsorption–desorption cycles. The uranium adsorption capacity of the developed adsorbent after one month in natural seawater is 6.2 mg g −1 , and the rate of uranium adsorption on the hydrogel is 0.21 mg g −1 day −1 .

polymer science,chemistry, organic, applied
Sol-gel transition effect based on konjac glucomannan thermosensitive hydrogel for photo-assisted uranium extraction

Xudong Wu,Tong Liu,Huimin Li,Yizhou He,Guolin Yang,Wenkun Zhu,Tao Chen

DOI: https://doi.org/10.1016/j.scib.2024.07.005

2024-10-15

Abstract:Exploiting the intelligent photocatalysts capable of phase separation provides a promising solution to the removal of uranium, which is expected to solve the difficulty in separation and the poor selectivity of traditional photocatalysts in carbonate-containing uranium wastewater. In this paper, the γ-FeOOH/konjac glucomannan grafted with phenolic hydroxyl groups/poly-N-isopropylacrylamide (γ-FeOOH/KGM(Ga)/PNIPAM) thermosensitive hydrogel is proposed as the photocatalysts for extracting uranium from carbonate-containing uranium wastewater. The dynamic phase transformation is demonstrated to confirm the arbitrary transition of γ-FeOOH/KGM(Ga)/PNIPAM thermosensitive hydrogel from a dispersed state with a high specific surface area at low temperatures to a stable aggregated state at high temperatures. Notably, the γ-FeOOH/KGM(Ga)/PNIPAM thermosensitive hydrogel achieves a remarkably high rate of 92.3% in the removal of uranium from the wastewater containing carbonates and maintains the efficiency of uranium removal from uranium mine wastewater at over 90%. Relying on electron spin resonance and free radical capture experiment, we reveal the adsorption-reduction-nucleation-crystallization mechanism of uranium on γ-FeOOH/KGM(Ga)/PNIPAM thermosensitive hydrogel. Overall, this strategy provides a promising solution to treating uranium-contaminated wastewater, showing a massive potential in water purification.
A robust polyethyleneimine-based supramolecular hydrogel towards uranium adsorption and deposition

Danyan Chen,Dexing Zhang,Shufen Zou,Bing Na,Shuang Zhang,Shan Lin

DOI: https://doi.org/10.1016/j.colsurfa.2022.130886

2022-12-29

Abstract:Polymer hydrogels, with abundant ion diffusion paths, are promising for uranium capture in aqueous solutions. Herein, a robust supramolecular hydrogel with superior structural stability and mechanical strength is fabricated under acidic conditions via hydrogen bonding interactions between polyethyleneimine and cellulose nanofibers. The supramolecular hydrogel has a maximum uranium uptake capacity of 641 mg-U/g at pH=7, together with a high tolerance towards interfering metal cations. The uranium uptake proceeds via adsorption and subsequent deposition; in the latter the adsorbed uranyl ions are partially combined with local hydroxide ions induced by polyethyleneimine. The supramolecular hydrogel, with the merits of easy fabrication and cyclic utilization, has great potentials for uranium removal and recovery from uranium-containing wastewater.

chemistry, physical
Colloidal templating of highly ordered porous amidoxime-functionalized hydrogel for intelligent treatment of uranium contaminated water

Fubing Xiao,Hong Li,Peng Xie,Jie Liu,Wenfang Du,Le Li,Shengyuan Yang,Zhaoyang Wu

DOI: https://doi.org/10.1016/j.cej.2021.134141

IF: 15.1

2022-03-01

Chemical Engineering Journal

Abstract:Uranium is the key element in the nuclear industry, but it often triggers serious risk when discharged into the natural environment. It is extremely urgent to construct a novel material that can realize intelligent treatment of uranium contaminated water. To this end, a hydrophilic amidoxime-functionalized porous colloidal crystal hydrogel (HAPCCH) is developed in this work for the effective adsorption and detection of uranyl ion (UO2 2+). HAPCCH with merits of abundant specific UO2 2+-binding sites of amidoxime ligands and excellent hydrophilicity achieves to a maximum adsorption capacity of 2.52 mmol g−1. The HAPCCH performs well for UO2 2+ removal in real water samples and shows good regeneration. In addition, sensitive and selective detection of UO2 2+ can be easily realized by recording the diffraction shift or observing the color change of HAPCCH, achieving a detection limit of 10 nM. The density functional theory (DFT) calculation results reveal that the lower binding free energy and Gibbs free energy of HAPCCH to UO2 2+ contribute to the better selectivity compared to other ions. The result indicates that this absorbent material holds great potential application in the water pollution control.

engineering, chemical, environmental
Ultrafast uranium recovery from high-salinity nuclear wastewater using amine-functionalized lignin microspheres

Lijun Guo,Liangqiong Peng,Jiheng Li,Wenhua Zhang,Bi Shi

DOI: https://doi.org/10.1016/j.jclepro.2023.136006

IF: 11.1

2023-01-12

Journal of Cleaner Production

Abstract:U(VI) recovery from high-salinity nuclear wastewater remains a diffcult challenge. Accordingly, amine-functionalized lignin microspheres (AL-PEI/GMS) with high porosity, abundant functional groups, and appropriate surface area, were synthesized via a green and simple process, and used as an adsorbent for U(VI) recovery. Results illustrated that AL-PEI/GMS showed outstanding adsorption capacity for U(VI) of 250 mg/g and high selectivity of SF U(VI) > 15, 000 over a wide pH range from one to nine, preeminent regeneration performance with adsorption efficiency > 95% after 50 cycles, and desorption performance (desorption efficiency > 60% after 50 cycles). The high applicability of AL-PEI/GMS was further proven by its high U(VI) removal efficiency under various high-salinity conditions (U(VI) removal rate > 99%). Furthermore, 2553 bed volumes (BV) of the U(VI) feeding streams can be effectively treated by AL-PEI/GMS via a fixed-bed column system with an extremely high flow rate (20 mL/min), and more than 95.6% of U(VI) can be rapidly desorbed by using 12 BV of eluent solution. Furthermore, the comparatively low operational costs and overall economic feasibility further suggested the great potential of AL-PEI/GMS for U(VI) on the industrial scale. The mechanism of U(VI) adsorption on AL-PEI/GMS was further found to be chemisorption-related. This work presents an applicable approach by using amine-functionalized lignin microspheres to achieve highly ultrafast U(VI) adsorption and desorption under a high-salinity condition via a fixed-bed column system, which not only provides a feasible method to purify U-contaminated nuclear wastewater, but also successfully realizes the recycling of U(VI) from nuclear wastewater, thus resolving the increasingly serious energy crisis and protecting environment in the nuclear industry.

environmental sciences,green & sustainable science & technology,engineering, environmental
Porous and biofouling-resistant amidoxime-based hybrid hydrogel with excellent interfacial compatibility for high-performance recovery of uranium from seawater

Gao-Jie Jiao,Jiliang Ma,Junqiang Zhang,Yancong Li,Kangning Liu,Runcang Sun

DOI: https://doi.org/10.1016/j.seppur.2022.120571

IF: 8.6

2022-04-01

Separation and Purification Technology

Abstract:For a massive uranium recovery from seawater, designing an adsorbent with ultrahigh uranium uptake capacity and good biofouling-resistant activity is crucial, but difficult. Here, a facile and eco-friendly freeze-thawing strategy was explored for the first time to create a physically crosslinked poly(amidoxime) (PAO)-chitosan (CS) hybrid hydrogel (PAO@CHM) with excellent interfacial compatibility, superior uranium uptake capacity and good anti-biofouling activity. The porous 3D network architecture of PAO@CHM, combined with its good hydrophilicity as well as antibacterial property, synergistically constructs numerous hydrophilic and biofouling-resistant ion channels for the rapid diffusion of uranyl ions into the interior of the hydrogel, achieving maximum use of adsorption active sites on PAO@CHM. Consequently, superior uranium uptake capacities (743.87, 865.27, and 1091.53 mg g−1 for PAO fixed on hydrogel) were obtained in 8, 16, and 32 ppm U-spiked water, respectively. Benifiting from the enhanced uranium adsorption activity and good antibacterial property, the uranium extraction capacity of PAO@CHM reached 7.46 mg g−1 after 28 days of exposure in 500 L of natural seawater, which is significantly higher than that of most of adsorbents. The O and N atoms in amidoxime group act as main bonding sites for uranium uptake. The finding of this study provides a facile and eco-friendly strategy to construct hydrophilic and biofouling-resistant amidoxime-based adsorbent for efficient uranium recovery from seawater.

engineering, chemical
Efficient removal of Cr(VI) by spent coffee grounds: Molecular adsorption and reduction mechanism

Yue Hu,Meiting Zhi,Shilin Chen,Wenguan Lu,Yinlong Lai,Xiaobing Wang

DOI: https://doi.org/10.1007/s11814-021-1045-4

IF: 2.7

2022-02-08

Korean Journal of Chemical Engineering

Abstract:Spent coffee ground (SCG), a byproduct from the soluble coffee industry, is usually discarded as waste. The reutilization of SCG for the removal of toxic heavy metal ions is a novel research direction. Until recently, the molecular adsorption and reduction mechanism of Cr(VI) on SCG was barely investigated. In this study, SCG was used for the efficient removal of Cr(VI) at a concentration range of 2`-100 mg/L, with a maximum Cr(VI) uptake up to 36.2 mg/ g. Structural characterization and ATR-FTIR analysis indicated that SCG possessed abundant surface O and N- containing functional groups. The corresponding adsorption and reduction effects on the Cr(VI) removal were investigated by the carboxyl and hydroxyl groups elimination experiments and ATR-FTIR characterization, respectively. The results revealed that HCrO4 ions were preliminarily adsorbed on SCG surfaced-COOH/-OH/-NH by the formation of hydrogen bond (SCG surfaced-COOH/-OH/-NH-HCrO44), and quickly reduced to Cr(III) by the electron denoted by phenolic compounds, and then in-situ immobilized on the surface of SCG. The effect of Cr(VI) concentration, coexisting ions, and humic acid was systematically studied to optimize the removal of Cr(VI) wastewater. Column experiments provided a new substitution to restore the Cr(VI)-containing groundwater for the permeable reactive barrier application. Thus, the proposed study uncovered the intrinsic Cr(VI) removal mechanism at the molecular level and explored the application of SCG for the efficient removal of Cr(VI).

engineering, chemical,chemistry, multidisciplinary
Semi-IPN Alg/PAO microspheres for the efficient removal of U(VI) from alkaline solution by experimental and DFT study

Zhen Zhang,Xinglei Wang,Jingbo Zhou,Hongxia Zhang,Fei Wu,Wangsuo Wu,Zhen Zhang,Xinglei Wang,Jingbo Zhou,Hongxia Zhang,Fei Wu,Wangsuo Wu

DOI: https://doi.org/10.1016/j.seppur.2022.121369

IF: 8.6

2022-09-01

Separation and Purification Technology

Abstract:Highly efficient recovery of uranium from seawater is essential for the enormous global demand of nuclear fuel in the future. In this study a new Semi-Interpenetrating Polymer Network Alg/PAO (Semi-IPN Alg/PAO) hydrogel microspheres adsorbent (Abbreviated as Alg/PAO) was prepared by self-assembly method. This material has high uranium adsorption capacity (186.6 mg/g at room temperature), high adsorption selectivity, easy to manufacture on large-scale, facile to handle and collect in practical situations, which are essential for practical applications in the recovery of U(VI) from seawater. The effects of solid-liquid ratio, ionic strength, contact time, pH, initial concentration and temperature on the adsorption of uranium by Alg/PAO hydrogel microspheres were investigated by batch experiments. The U(VI) adsorption on Alg/PAO hydrogel microspheres fitted well to the pseudo second-order kinetic model and Langmuir model. FTIR and XPS and DFT (Density Functional Theory) simulations indicate that the uranyl ion mainly form chelates with amidoxime groups and carboxyl groups on sodium alginate with uranium.

engineering, chemical
Synthesis and characterization of waste commercially available polyacrylonitrile fiber-based new composites for efficient removal of uranyl from U(VI)–CO3 solutions

Jun Liu,Shilong Shi,Junxiang Shu,Chao Li,Hanyi He,Chuyan Xiao,Xiangqian Dong,Yuhua He,Jiali Liao,Ning Liu,Tu Lan

DOI: https://doi.org/10.1016/j.scitotenv.2022.153507

2022-05-01

Abstract:The existing species of uranium determines the design of novel sorbents towards uranium extraction from the natural waters. Herein, three composites based on waste commercially available polyacrylonitrile fiber (WPANF), namely WPANF/TiO2·xH2O, WPANF/CTAB-bentonite, and WPANF/NZVI, were first prepared and employed for the removal of U(VI) from the carbonate coexisted aqueous solutions. Among them, the WPANF/TiO2·xH2O exhibited the optimum sorption capacity of ~40.6 mg·g−1 (pH 8.0, C0 = 50 mg·L−1, and [CO3]Total = 2 mmol·L−1), which is significantly greater than the WPANF/CTAB-bentonite (~12.6 mg·g−1) and WPANF/NZVI (~10.3 mg·g−1). All sorption capacities decreased with the increases of initial pH, [NaCl], and [CO3]Total, due to the species transformation from UO2(CO3)22− and (UO2)2CO3(OH)3− to UO2(CO3)34− that enhanced the electrostatic repulsion and the competitive sorption. The XPS analysis and DFT calculations indicated that in the composites, WPANF was a role in strengthening the mechanical properties of composites rather than the main sorption sites for uranyl carbonates. The sorption mechanisms were mainly involved in –OH group coordination, Br− anions exchanges, and redox reactions. Desorption, reusability and U(VI) sorption test in the simulated seawater demonstrated that WPANF/TiO2·xH2O could be an alternative candidate for acquiring uranium resource. This work has screened the potential composites for U(VI) extraction from the natural waters, especially based on the practical U(VI) speciation, and provides a novel research approach for the removal of U(VI) towards U(VI)–CO3 systems.

environmental sciences
Self-Emulsifying Air-in-Water Hipes-Templated Construction of Amidoxime Functionalized and Chain Entanglement Enhanced Macroporous Hydrogel for Fast and Selective Uranium Extraction

Jianming Pan,Xue Bai,Jing Tang,Hao Li

DOI: https://doi.org/10.2139/ssrn.4161662

2022-01-01

SSRN Electronic Journal

Abstract:A convenient design of amidoxime (AO)-functionalized hydrogel sorbent containing interconnected pores is critical for facilitating fast and selective uranium extraction. To address this, air-in-water high internal phase emulsions (HIPEs) templated construction of AO functionalized macroporous hydrogel sorbents (GMPAO) is reported for highly efficient extraction of uranium from aqueous solution. Curled gelatin methacryloyl (GelMA) chains, as amphiphilic Pickering emulsifier and molecular surfactant, endow self-emulsifying ability to stabilize the air/water interface. GMPAO exhibits an open-cell structure (diameter is about 80% between 200 µm and 300 µm) with interconnecting pores (distribution is about 70% between 55 µm and 75 µm), and the chain entanglement between polyamidoxime (PAO) and GelMA enhances mechanical strength. Benefitting from the macroporous structure and abundant affinity sites, GMPAO displays a spontaneous uranium adsorption capacity of 466.78 mg g-1 at 298 K and faster uptake within 60 min, which are superior than or comparable to those of previously reported hydrogel sorbent. In addition, GMPAO hydrogel still achieves the highest capacity and remarkable removal rate of almost 100% towards uranium in the presence of competitive ions, as well as excellent recyclability toward uranium capture. The specific coordination toward amidoxime groups against uranium as the main binding mechanism is rationalized, and the carboxylates from GelMA may cooperate as a synergistic effect for uranium uptake by charge interaction. Most importantly, this work not only demonstrates a new strategy for preparing macroporous hydrogel sorbents with enough stability but also provides a new perspective for recovering uranium from aqueous solution.

Nuclear steroid binding in rat adrenal gland.

Phytic acid-functionalized polyamidoxime/alginate hydrogel for targeted uranium extraction from acidic wastewater

Synthesis of amidoximated polyacrylonitrile/sodium alginate composite hydrogel beed and its use in selective and recyclable removal of U(VI)

Carboxymethylcellulose-based zwitterionic cryogels for efficient U(VI) extraction from water

Fabrication of a Novel Electrospun Polyvinyl Alcohol/polyacrylic Acid Nanofiber Adsorbent Loading with Montmorillonite or Zeolite for Uranium (VI) Removal

Hierarchical build-up of vertically oriented lignin-based aerogel for photothermally assisted uranium uptake and recovery from acidic wastewater

Tough, self-healing, and freeze-resistant composite dual-network hydrogels for the decontamination of surface uranium (VI)

Selective adsorption of uranium (VI) from wastewater using a UiO-66/calcium alginate/hydrothermal carbon composite material

Alginate-based supermacroporous hydrogel fabricated by cryo-polymerization for uranium extraction from seawater

A thermal-responsive hydrogel to capture uranium(VI) from aqueous solution: properties and mechanism

Synergistic improvement of mechanical and adsorption property by constructing physical multiple-network hydrogel for removing uranium

MOF-implanted poly (acrylamide- co -acrylic acid)/chitosan organic hydrogel for uranium extraction from seawater

Sol-gel transition effect based on konjac glucomannan thermosensitive hydrogel for photo-assisted uranium extraction

A robust polyethyleneimine-based supramolecular hydrogel towards uranium adsorption and deposition

Colloidal templating of highly ordered porous amidoxime-functionalized hydrogel for intelligent treatment of uranium contaminated water

Ultrafast uranium recovery from high-salinity nuclear wastewater using amine-functionalized lignin microspheres

Porous and biofouling-resistant amidoxime-based hybrid hydrogel with excellent interfacial compatibility for high-performance recovery of uranium from seawater

Efficient removal of Cr(VI) by spent coffee grounds: Molecular adsorption and reduction mechanism

Semi-IPN Alg/PAO microspheres for the efficient removal of U(VI) from alkaline solution by experimental and DFT study

Synthesis and characterization of waste commercially available polyacrylonitrile fiber-based new composites for efficient removal of uranyl from U(VI)–CO3 solutions

Self-Emulsifying Air-in-Water Hipes-Templated Construction of Amidoxime Functionalized and Chain Entanglement Enhanced Macroporous Hydrogel for Fast and Selective Uranium Extraction