Abstract:In this paper, a control method of a novel tilt-rotor UAV with a blended wing body layout is studied. The novel UAV is capable of vertical take-off and landing and has strong stealth capabilities that can be applied to carrier-borne reconnaissance aircraft. However, the high aspect ratio of blended wing body UAVs leads to a wingtip or oar-tip touchdown problem when adopting the conventional position-attitude control (CPAC) scheme with a large crosswind disturbance. Moreover, when the UAV is subject to interference during reconnaissance, aerial photography, and landing missions, the conventional scheme cannot provide both attitude stability and track accuracy. First, a direct thrust vectoring control (DTVC) scheme is proposed. The control authority of the rotor tilt mechanism was added to enable the decoupling of the attitude and trajectory and to improve the response rate and response bandwidth of the flight trajectory. Second, considering the problems of strong couplings and parameter uncertainties and the nonlinear features and mismatched perturbations that are inevitable in the tilt-rotor, we designed a robust UAV controller based on the backstepping sliding mode control method and determined the stability of the control system through the Lyapunov function. Finally, in the case of crosswire interference during vertical takeoff and landing and the aerial photography missions of the UAV, the numerical simulation of the CPAC scheme and the DTVC scheme was carried out, respectively, and the Monte Carlo random test method was introduced to conduct the statistical test of the landing accuracy. The simulation results show that the DTVC scheme improves the landing accuracy and speed compared to the CAPC scheme and decouples the position control loop from the attitude control loop, finally enabling the UAV to complete the flight control in the VTOL phase.

Path‐Tracking Control of Tilting Quadrotor UAV Based on Variable Structure Sliding Mode Control Method

Position and Attitude Separation Control for Tiltable Quadrotors: an Appointed-Time Prescribed Performance Anti-Disturbance Approach

A Nonlinear Robust Sliding Mode Controller with Auxiliary Dynamic System for the Hovering Flight of a Tilt Tri-Rotor UAV

Longitudinal dynamic modelling and control for a quad-tilt rotor UAV

Global fast dynamic terminal sliding mode control for a quadrotor UAV

An innovative fuzzy backstepping sliding mode controller for a Tri-Rotor Unmanned Aerial Vehicle

Immersion and Invariance-based Sliding Mode Attitude Control of Tilt Tri-rotor UAV in Helicopter Mode

Sliding Mode Controller Design for a Flying Quadrotor with Simplified Action Planner

Sliding mode control design for the attitude and altitude of the quadrotor UAV

Second order sliding mode control for a quadrotor UAV

Finite-time Adaptive Integral Backstepping Fast Terminal Sliding Mode Control Application on Quadrotor UAV

Sliding Mode Controller Based on the Extended State Observer for Plant-Protection Quadrotor Unmanned Aerial Vehicles

Position and attitude tracking control for a quadrotor UAV

Sliding-Mode Control for Flight Stability of Quadrotor Drone Using Adaptive Super-Twisting Reaching Law

Adaptive Sliding Mode Attitude Control of Quadrotor UAVs Based on the Delta Operator Framework

Attitude Control of a Single Tilt Tri-Rotor UAV System: Dynamic Modeling and Each Channel's Nonlinear Controllers Design

Thrust Vectoring Control of a Novel Tilt-Rotor UAV Based on Backstepping Sliding Model Method

Integral Adaptive Sliding Mode Control for Quadcopter UAV Under Variable Payload and Disturbance

Dynamics Modeling and Trajectory Tracking Control of a Quadrotor Unmanned Aerial Vehicle

Robust Adaptive Backstepping Global Fast Dynamic Terminal Sliding Mode Controller Design for Quadrotors

Underwater motions analysis and control of a coupling-tiltable unmanned aerial-aquatic quadrotor