Abstract:Background: The leading carbon emitting unit of the zinc smelting industry is the zinc oxide rotary kiln, which preserves a trade-off between carbothermic reduction and the zinc recovery rate. To scale up a substantial zinc restoration rate during the hydrometallurgical process, a substantial amount of coke is combusted, which leads to significant greenhouse gas emissions. It is imperative to mitigate the emission of carbon as reduced as possible. Since the kiln operates in three different regions — gas, solid, and wall — several highly non-uniform paths are typically linked to one another to yield complex looping processes. In industrial settings, solid maldistribution and gas refluxing pose prevalent challenges in the gas–solid flow mechanism. Consequently, control over processes and observation of the internal states/concomitant parameters become critical for ensuring safe and reliable operation. Therefore, it is imperative to devise effective control layouts to optimize the functioning of the kiln system. Method: (i) The usual form of model-predictive control rule is paired with an economic stage cost (using the CasADi optimization method) to offer optimal consumption of the coal and the rotation speed, thereby effectively alleviating the adverse effects of the unmeasured perturbations, actuator faults, or multi-sensor failures. (ii) With the aid of accessible state sensors, a cubature Kalman filter infused with a singular-value-decomposition strategy reliably predicts uncertainties/faults of the actuators or the unmeasured states of the kiln. (iii) cubature Kalman filter and event-triggered scheduling are utilized together, to consume less communication resources. Significant findings: A variety of indicators, such as zinc recovery rate (1.35% improvement), carbon emissivity (11.54% improvement), residence time (6% shorter), accuracy of the controllers/observers were well assessed and compared with standard form of the non-linear model predictive control law to figure out the efficiency and acceptability of the economic model predictive controller, demonstrating on an industrial rotary kiln. An in-depth study of the proposed control method satisfying Lyapunov inequality has been addressed.

Event-Triggered Optimal Control for Temperature Field of Roller Kiln Based on Adaptive Dynamic Programming

ADP-Based Event-Triggered Constrained Optimal Control on Spatiotemporal Process: Application to Temperature Field in Roller Kiln

PIDNN Based Intelligent Control of Ignition Oven

Predictive Functional Control of Outlet Temperature in Delayed Coking Furnace

Rotary Kiln Temperature Control Under Multiple Operating Conditions: An Error-Triggered Adaptive Model Predictive Control Solution

Robust oxygen excess ratio control of PEMFC systems using adaptive dynamic programming

Temperature Prediction Model for Roller Kiln by ALD-Based Double Locally Weighted Kernel Principal Component Regression

Neural dynamic programming based temperature optimal control for cement calcined process

Thermal Modelling and Controller Design of an Alkaline Electrolysis System under Dynamic Operating Conditions

Multi-Objective Adaptive Optimization Model Predictive Control: Decreasing Carbon Emissions from a Zinc Oxide Rotary Kiln

Data-Driven Event-Triggered Adaptive Dynamic Programming Control for Nonlinear Systems with Input Saturation.

Thermal Modeling and Controller Design of an Alkaline Electrolysis System under Dynamic Operating Conditions

A Fast Thermal Simulation and Dynamic Feedback Control Framework for Lithium-Ion Batteries

Event-Triggered Near-Optimal Control of Discrete-Time Constrained Nonlinear Systems With Application to a Boiler-Turbine System

Event-triggered optimal decentralized control for stochastic interconnected nonlinear systems via adaptive dynamic programming

Lowering carbon emissions from a zinc oxide rotary kiln using event-scheduling observer-based economic model predictive controller

Multi-Zone Integrated Iterative-Decoupling Control of Temperature Field of Large-Scale Vertical Quenching Furnaces Based on ESRNN

Nonlinear model predictive control of direct internal reforming solid oxide fuel cells via PDAE-constrained dynamic optimization

A Precise Temperature Control Method for Lithium-ion Battery Pack based on the Nonlinear Model Predictive Control Algorithm

A Two-Stage Real-Time Optimized EV Battery Cooling Control Based on Hierarchical and Iterative Dynamic Programming and MPC

Adaptive Dynamic Programming For Optimal Control Of Coal Gasification Process