Primary neoplasms in vesical diverticula: report of 10 cases.

D. Montague,R. Boltuch

DOI: https://doi.org/10.1016/S0022-5347(17)58664-4

1976-07-01

Abstract:

What problem does this paper attempt to address?

Management of malignant tumors of the anterior skull base: experience with 76 patients.

K. Bulsara,T. Fukushima,A. Friedman

DOI: https://doi.org/10.3171/FOC.2002.13.4.6

2002-10-15

Neurosurgical FOCUS

Abstract:As the management of anterior cranial fossa malignancies has undergone significant evolution, decreases in morbidity and mortality rates have occurred. In this article, the authors discuss the clinical presentation, neuroimaging findings, and management options for common anterior skull base malignancies. Also discussed are surgery-related indications and principles.
The accuracy and reliability of preoperative digital 2D templating in prosthesis size prediction in uncemented versus cemented total hip arthroplasty: a systematic review and meta-analysis

Joshua B.V. Smith,Habeeb Bishi,Chao Wang,Vipin Asopa,Richard E. Field,David H. Sochart

DOI: https://doi.org/10.1302/2058-5241.6.210048

IF: 4.775

2021-11-01

EFORT Open Reviews

Abstract:The purpose of this study was to compare the accuracy and the inter- and intra-observer reliability of preoperative digital 2D templating in prosthesis size prediction for the planning of cemented or uncemented THA. This study was registered in the NIHR PROSPERO database (ID: CRD42020216649) and conducted according to the PRISMA guidelines. A search of electronic databases in March 2021 found 29 papers overall. The quality of evidence was assessed using the IHE Quality Appraisal of Case Series Studies Checklist and the CASP Randomised Controlled Trials Checklist. A meta-analysis was conducted, and the accuracy was presented as proportions and the inter- and intra-observer reliability were measured using intraclass correlation coefficients (ICC). Accuracy within one prosthesis size (±1) for cemented stems was 0.89 (95% confidence interval (CI) 0.83–0.95), cemented cups 0.78 (95% CI 0.67–0.89), uncemented stems 0.74 (95% CI 0.66–0.82) and uncemented cups 0.73 (95% CI 0.67–0.79) (test of group differences: p = 0.010). Inter-observer reliability (ICC) for uncemented cups was 0.88 (95% CI 0.85–0.91), uncemented stems 0.86 (95% CI 0.81–0.91), cemented stems 0.69 (95% CI 0.54–0.84) and cemented cups 0.68 (95% CI 0.55–0.81) (test of group differences: p = 0.004). Due to lack of data, intra-observer reliability (ICC) could only be calculated for uncemented prostheses, which for the stems was 0.90 (95% CI 0.88–0.92) and for the cups was 0.87 (95% CI 0.83–0.90) (test of group differences: p = 0.124). The accuracy of preoperative digital templating is greater for cemented prostheses, but the inter-observer reliability is greater for uncemented prostheses. The intra-observer reliability showed a high level of agreement for uncemented prostheses. Cite this article: EFORT Open Rev 2021;6:1020-1039. DOI: 10.1302/2058-5241.6.210048

orthopedics
Comparison of three-versus two-dimensional pre-operative planning for total hip arthroplasty

James P Crutcher,Daniel Hameed,Jeremy Dubin,Michael A Mont,Michael Mont

DOI: https://doi.org/10.1016/j.jor.2023.11.001

2023-11-07

Abstract:Background: A successful clinical outcome for total hip arthroplasty (THA) depends on accurate sizing and positioning of the implants. Using three-dimensional (3-D) pre-operative planning with a computerized tomography (CT) scan has many potential advantages over conventional 2-D planning using radiographs, including potentially more accurate assessments of the size and anteversion of the acetabulum, as well as lateral femoral offset. The purpose of this study was to compare the accuracy of 3-D to 2-D templating with respect to acetabular and femoral size, as well as lateral femoral offset. Methods: Pre-operative templating data was collected prospectively from a consecutive series of 290 primary THAs (acetabulum on all, femoral component on 255 of the cases using one specific stem). All cases were initially templated on a digital imaging picture archiving and communication (PACS) system with calibrated images to estimate the acetabular size, femoral size, and lateral femoral offset. The 3-D templating was then performed with software based on a CT scan, and the results were compared to what was surgically implanted. Results: The 3-D templating for the acetabulum was accurate 99.7% of the time based on the final implanted component. The 2-D templating for the acetabulum was accurate 39% of the time, with 46% of cases templating smaller and 15% templating larger. The 3-D templating of the femoral component was accurate 63% of the time, and within one size of final implant in 96% of cases. The 2-D templating of the femoral component was accurate 53% of the time and within one size of final implant in 94% of cases. The 2-D templated femoral offset was accurate 87% of the time and was changed in 13% of cases after 3-D templating. Conclusion: The CT-based 3-D preoperative planning was superior to 2-D planning for THA with respect to acetabular size, femoral size, and lateral femoral offset. Precise acetabular component sizing conserves bone and allows for a more predictable press fit, while facilitating efficient inventory management. Lateral femoral offset is often difficult to measure on 2-D images, and 3-D templating consistently allows for accurate offset restoration, which is important for normal hip function and stability.
Accuracy and clinical role of digital templating for total knee arthroplasty performed on haemophilic knees

Arman Vahabi,Erdem Er,Elcil Kaya Biçer,Fahri Şahin,Kaan Kavakli,Semih Aydoğdu

DOI: https://doi.org/10.1111/hae.15072

2024-06-22

Haemophilia

Abstract:Introduction In total knee arthroplasty (TKA), choosing the correct implant size is important. There is lack of data on accuracy of templating on haemophilic knees. Our aim was to test the accuracy of 2D digital templating for TKA on haemophilic arthropathy (HA) of knee. Materials and Methods TKAs performed on HA between January 2011 and January 2022 were screened. Osteoarthritis (OA) group was created as control group by a one‐to‐one matching regarding type of implant used. Intra‐ and interobserver correlations were measured in HA, then correlation between templated and implanted sizes was investigated in four assessments (femur AP, femur lateral, tibia AP, tibia lateral), then compared with OA group. Fifty‐eight knees in each group included. Results Regarding intraobserver correlation in HA, there was excellent correlation for femur AP [.93 (.73–.98)], femur lateral [.98 (.91–.99)], and tibia AP (1.0) templating. Regarding interobserver correlation in HA, excellent correlation was observed for femur lateral [.93 (.74–.98)] and tibia AP templating [.90 (.65–.97)]. Regarding correlation of templated and applied sizes in HA; tibia AP, tibia lateral and femur lateral templating showed good correlation [.81 (.70–.89), .86 (.77–.91), .79 (.67–.87) while femur AP templating showed moderate correlation [.67 (.50–.79)]. Comparing HA and OA, there was no difference in correlation levels regarding femur AP, femur lateral, tibia AP and tibia lateral templating (p = .056, p = .781, p = .761, p = .083, respectively). Conclusion Although 2D digital templating shows comparable correlation in HA and OA, clinical applicability of templating on HA appears to be limited in its current state.

hematology
Automated Digital Templating of Component Sizing is Accurate in Robotic Total Hip Arthroplasty when Compared to Predicate Software

Graham B.J. Buchan,Christian J. Hecht,Sebastian Rodriguez-Elizalde,Tamon Kabata,Atul F. Kamath

DOI: https://doi.org/10.1016/j.medengphy.2024.104105

IF: 2.356

2024-01-11

Medical Engineering & Physics

Abstract:Accurate pre-operative templating of prosthesis components is an essential factor in successful total hip arthroplasty (THA), including robotically-assisted THA (RA-THA) techniques. We sought to validate the accuracy of a novel, robotic-optimized THA planning software compared to a predicate THA planner for component sizing. We analyzed a series of 199 patients who received manual THA (mTHA) and fluoroscopy-based RA-THA at a single institution. All cases were templated using a predicate pre-operative templating software. For RA-THA cases, the novel robotic-optimized pre-operative planner software was also used for templating. The differences between templated and implanted acetabular cup, femoral head, and stem component sizes were compared based on matching within 1, 2, and ≥3 sizes. Differences in templated and implanted femoral stem implant geometry were also compared. The robot-optimized pre-operative RA-THA plans demonstrated equivalent accuracy to that of predicate pre-operative plans for both RA-THA and mTHA cases. Templated acetabular cups (90.4 vs. 86.8 vs. 82.8; p=0.421), femoral stems (76.0 vs. 65.1 vs. 67.7; p=0.096), and femoral heads (91.3 vs. 96.2 vs. 88.2; p=0.302) were within +/-1 size of implanted components. No significant differences were detected in the proportion of matching templated and implanted stem geometry across the study cohorts.

engineering, biomedical
Total Hip Arthroplasty with Cementless Cups and Femoral Head Autografts for Patients with Hip Dysplasia and Osteoarthritis

Li-Dong Wu,Li-Bin Jin,Shi-Gui Yan,Quan-Sen Yang,Xue-Song Dai,Xiang-Hua Wang

2004-01-01

Abstract:OBJECTIVE To evaluate the outcome of total hip arthroplasty (THA) with cementless cups and femoral head autografts for patients with hip dysplasia and osteoarthritis. METHODS Between 1995 and 2002, we implanted 23 cementless cups and femoral head autografts in 20 patients with hip dysplasia and osteoarthritis. In this study, a retrospective study was made on 21 hips in 20 patients (18 females and 2 males, aged 50 years on an average) with developmental hip dysplasia treated by THA with a cementless cup and femoral head autograft. The acetabular cup was placed at the level of the true acetabulum and all the patients required autogenous femoral head grafts due to acetabular deficiency. The average rate of the acetabular cup covered by the femoral head autograft was 31% (ranging from 10% to 45%). Eight hips had less than 25% cup coverage and thirteen between 25% and 50%. The average follow-up period was 4.7 years (range, 1-8 years). The replacing outcome was evaluated by modified Harris hip score. Preoperative and follow-up radiographs were made. RESULTS All the autografts were united to the host bones. No autograft was collapsed or no component from the hip was loosed in all the patients. According to the modified Harris hip score, the average hip score increased from 46 before operation to 89 at the final review. Before operation, the leg-length discrepancy was greater than 2 cm in all the patients except one with bilateral hip dysplasia. After operation, only 2 out of 20 patients had a leg-length discrepancy greater than 1 cm. Three hips showed minor bone resorption in the lateral portion of the graft, which did not support the cup. Three hips developed Grade 1 Brooker heterotopic ossification and one developed Grade 2. CONCLUSIONS THA with a cementless cup and a femoral head autograft for patients with osteoarthritis resulted from hip dysplasia can result in favorable outcomes. This method can provide reliable acetabular fixation and restore the acetabular bone stock in patients with developmental hip dysplasia when the cementless cup covered by the graft does not exceed 50%.
Three-dimensional templating in hip arthroplasty: the basis for template-directed instrumentation?

P. Savov,S. Budde,S. Tsamassiotis,H. Windhagen,M. Klintschar,M. Ettinger

DOI: https://doi.org/10.1007/s00402-020-03394-7

IF: 2.928

2020-03-10

Archives of Orthopaedic and Trauma Surgery

Abstract:Abstract Introduction Computed tomography-based three-dimensional models may allow the accurate determination of the center of rotation, lateral and anterior femoral offsets, and the required implant size in total hip arthroplasty. In this cadaver study, the accuracy of anatomical reconstruction was evaluated using a three-dimensional planning tool. Materials and methods A total of eight hip arthroplasties were performed on four bilateral specimens. Based on a computed tomography scan, the position and size of the prosthesis were templated with respect to the anatomical conditions. Results On average, all parameters were reconstructed to an accuracy of 4.5 mm and lie within the limits recommended in the literature. All prostheses were implanted with the templated size. Conclusions The exact anatomy of the patient and the required size and position of the prosthesis were precisely analyzed using a templating software. Based on the present findings, the development of template-directed instrumentation is conceivable using this method. However, further technical features (e.g., navigation or robot-assisted surgery) are required for improved precision for implant positioning.

surgery,orthopedics
How to perform correct templating in total hip replacement

A. Di Martino,V. Rossomando,M. Brunello,C. D’Agostino,D. Pederiva,J. Frugiuele,F. Pilla,C. Faldini

DOI: https://doi.org/10.1007/s12306-023-00772-3

2023-01-12

MUSCULOSKELETAL SURGERY

Abstract:Templating plays a key role in surgery that is often underestimated. There is a difference between planning and templating: in the first not only the hip is considered but involves the evaluation of the patient in its entirety. Templating instead consists of calculating the position of the implant in order to place it in the best possible position. Fundamental is a correct X-ray of the pelvis, which must follow certain standards. For traditional templating, drawings on appropriately enlarged transparent implants were provided by the prosthesis manufacturer. The implementation of digital software into clinical practice has improved the accuracy and reproducibility of templating, which in most surgical units is performed by standard 2D radiographic images. Thanks to digital preoperative templating in a digital radiology environment, the hip reconstructive surgeon can perform preoperative planning and implant sizing quickly, consistently, and affordably. Currently, 3D templating can also be performed by software used initially to create personalized stems for THA. Aim of the current review is to outline the essentials of correct templating in THA performance, and to report the updates since the introduction of digital and 3D technologies in this setting.
Validation of mediCAD® software for fully digital preoperative planning of total hip arthroplasty: a retrospective study

Pierre-Alban Bouché,Simon Corsia,Guillaume Auberger,Jules Descamps,Philippe Anract,Moussa Hamadouche

DOI: https://doi.org/10.1016/j.otsr.2024.103941

Abstract:Introduction: The planning step that precedes a total hip arthroplasty (THA) procedure is crucial. Digital planning software programs are being increasingly used, although few studies have reported on the reliability of such tools. Furthermore, no studies have been conducted on the mediCAD® software, despite it being widely used in France. This led us to conduct a retrospective study to: (1) assess the accuracy of this planning software, (2) determine the intra- and inter-rater reliability, (3) determine how obesity affects the accuracy of planning. Hypothesis: THA planning is accurate and reliable when using the mediCAD® software. Patients and methods: This was a single center, retrospective study. One hundred one consecutive cases performed by a single experienced surgeon were planned retrospectively by two blinded surgeons on two separate occasions. The acetabular cup was cemented in 90 hips (89%), cementless in 11 hips (11%). A dual mobility cup was used in 21 hips (21%). The femoral stem was cemented in 60 hips (59%). The endpoint was the number of exact plans, defined as the same size as the actual implants. An acceptable match was defined as a difference of one size. The match was unacceptable if the planned and implanted size differed by more than 2 for the acetabular cup or by more than 1 size for the femoral stem. The intra-rater and inter-rater reliability were calculated using the intraclass correlation coefficient (ICC) with 95% confidence intervals (CI). Results: Exact agreement was found by the first rater for 15 planned acetabular cups (15%) and for 45 planned femoral stems (45%) relative to the implants used. The second rater reached exact agreement for 20 planned acetabular cups (20%) and 50 planned femoral stems (50%). The intra-rater reliability for the acetabular cup was average (ICC = 0.57; 95%CI [0.43-0.69]) and poor (ICC = 0.38 95%CI [0.20-054]) for the 1st and 2nd rater, respectively. The intra-rater reliability for the femoral stem was poor for the 1st rater (ICC = 0.47 95%CI [0.30-0.61]) and the 2nd rater (ICC = 0.45 95%CI [0.29-0.60]). The interobserver reliability was low for the planned acetabular cup (ICC = 0.39 95%CI [0.21-0.54]) and the planned femoral stem (ICC = 0.42 95%CI [0.24-0.57]). Overall, when combining the two raters, exact prediction of the acetabular cup was achieved in 31 hips (19%) in non-obese patients and in 7 hips (21%) in obese patients (p = 0.62). Discussion: This study found acceptable reliability of the mediCAD® software. Experience level, radiograph magnification affected the planning outcome in this study, but obesity did not. We currently do not have the ability to incorporate a reliable radiological scale for two-dimensional templating. Some surgeons prefer using a CT scan, but this costs more than conventional radiographs and exposes the patient to more radiation. This study shows that the mediCAD® software can provide satisfactory output for the preoperative planning of THA. Level of evidence: III; retrospective, diagnostic, comparative study.
[Total Hip Arthroplasty for Crowe Type IV Developmental Dysplasia of the Hip with S-ROM Prosthesis].

Qi-Cai Sun,Xiang-Hua Wang,Bai-Shan Song,Fang-Bing Zhu,Shi-gui Yan

DOI: https://doi.org/10.3969/j.issn.1003-0034.2013.02.018

2013-01-01

Abstract:OBJECTIVE To develop the techniques of total hip arthroplasty(THA) for Crowe type IV developmental dysplasia of the hip (DDH) with S-ROM prosthesis,and to assess its clinical results. METHODS From October 2000 to October 2011,30 patients (36 hips) with Crowe type IV DDH underwent THA,including 6 patients with bilateral hip involved and 24 patients with unilateral. S-ROM prosthesis was adopted together with subtrochanteric transverse osteotomy. All the cementless acetabular cups were placed at the original anatomic location. The threaded cups were put in or near the level of the true acetabulum in all patients. Full coating stems were used in femoral side. All the patients were evaluated by using the Modified Harris Hip Score. Radiographic evaluations were made preoperatively and during follow-up. RESULTS Two patients lost of follow-up. Twenty-seven patients with 32 hips were followed up,and the average duration was 48 months (ranging from 7 to 84 months). There was 1 patient with bilateral THA died from hemorrhagic shock. Two patients could walk freely with the visible fracture lines at 12th and 18th months postoperatively. There were no complications such as infection or nerve injuries. Modified Harris Hip Score improved from preoperative 41.7+/-3.7 to postoperative 89.1+/-2.9. There was no acetabular or femoral component revision because of mal-position or loosening of the prostheses in all patients. Postoperative X-ray showed that all the prostheses in place,good integration between acetabular cups,femoral prosthesis and host bone without loosening. All bone grafts were integrated. All the hips acquired union of osteotomy and bone in-growth. None of the patients had radiographic evidence of aseptic loosening of prosthesis. CONCLUSION For the complex DDH, follow methods should be used to improve therapeutic effects:good exposure of the true acetabulum,deepen acetabulum, femoral shortening, oblique osteotomy, using the S-ROM prosthesis.
The accuracy of digital templating in the preoperative planning of total knee arthroplasties: A systematic review and meta-analysis

Oliver Sebastian Lee,Firas Raheman,Parag Jaiswal

DOI: https://doi.org/10.1016/j.knee.2024.01.006

IF: 2.423

2024-02-24

The Knee

Abstract:Aims Accurately predicting the implant size in total knee arthroplasties could increase the efficiency of the operation, decrease the costs associated with the procedure and result in improved patient outcomes. To substantiate its continued use, digital templating must demonstrate itself to be an accurate tool in predicting component size in order for surgeons to confidently use it to optimize the procedure. Methods A systematic literature review was performed and identified 16 studies within the Pubmed, Ebsco and Ovid-Embase databases, with 1189 TKR prostheses included for analysis. A quality of evidence assessment was performed on each study depending on the study design. A random effects meta-analysis model was used to pool overall implant accuracy and the reported inter-rater agreement when performing digital templating and displayed in a forest plot. Meta-regression was used analyze potential factors that may affect the accuracy of digital templating. Results The pooled proportion of accurate templates with 0 margin of error was found to be 56% (52–61, 95CI), which increases to 96% (0.94–0.98, 95CI) when allowing for a 1 size margin of error. Subgroup analysis between femoral and tibial components concluded no statistically significant difference. Conclusions This study supports the continued use of digital templating for planning total knee arthroplasties and recommends further subgroup analysis of patient age, body mass index and sex against accuracy. This review was registered in the International Prospective Register of Systematic Reviews Database under ID: CRD420222367461. No funding was provided for the completion of this systematic review. Background Templating in the preoperative planning of total knee arthroplasties is a vital step in ensuring maximum operative efficiency. A method that can accurately predict the required implant size within 1 size could improve theatre turnover, decrease costs and benefit patient outcomes. The current literature on the accuracy of digital templating in total knee arthroplasties lacks a systematic review calculating the overall accuracy of the process, this study aims to address this gap.

surgery,orthopedics,sport sciences
Two-Dimensional Versus Three-Dimensional Preoperative Planning In Total Hip Arthroplasty

Andreas Fontalis,Adam T. Yasen,Babar Kayani,Tianyi David Luo,Fabio Mancino,Ahmed Magan,Ricci Plastow,Fares S. Haddad

DOI: https://doi.org/10.1016/j.arth.2024.05.054

IF: 4.435

2024-05-28

The Journal of Arthroplasty

Abstract:Background Pre-operative planning in total hip arthroplasty (THA), involves utilizing radiographs or advanced imaging modalities, including computerized tomography (CT) scans, for precise prediction of implant sizing and positioning. This study aimed to compare Three-Dimensional (3D) versus Two-Dimensional (2D) pre-operative planning in primary THA with respect to key surgical metrics, including restoration of the horizontal and vertical Center of Rotation (COR), combined offset, and leg length. Methods This study included 60 patients undergoing primary THA for symptomatic hip osteoarthritis, randomly allocated to either robotic-arm-assisted or conventional THA. Digital 2D templating and 3D planning using the robotic software were performed for all patients. All measurements to evaluate the accuracy of templating methods were conducted on the pre-operative CT scanogram, using the contralateral hip as a reference. Sensitivity analyses explored differences between 2D and 3D planning in patients who had supero-lateral or medial osteoarthritis patterns. Results Compared to 2D templating, 3D templating was associated with less medialization of the horizontal COR (-1.2 versus -0.2 mm, P = 0.002) and more accurate restoration of the vertical COR (1.63 versus 0.3 mm, P < 0.001) with respect to the contralateral side. Furthermore, 3D templating was superior for planned restoration of leg length (+0.23 versus -0.74 mm, P = 0.019). Sensitivity analyses demonstrated that in patients who had medial osteoarthritis, 3D planning resulted in less medialization of horizontal COR and less offset reduction. Conversely, in patients who had supero-lateral osteoarthritis, there was less lateralization of horizontal COR and less offset increase using 3D planning. Additionally, 3D planning showed superior reproducibility for stem, acetabular cup sizes, and neck angle, while 2D planning often led to smaller stem and cup sizes. Conclusion Our findings indicated higher accuracy in the planned restoration of native joint mechanics using 3D planning. Additionally, this study highlights distinct variances between the two planning methods across different osteoarthritis pattern subtypes, offering valuable insights for clinicians employing 2D planning.

orthopedics
Robotic arm-assisted total hip arthroplasty via a minimally invasive anterolateral approach in the supine position improves the precision of cup placement in patients with developmental dysplasia of the hip

Yasuaki Tamaki,Tomohiro Goto,Keizo Wada,Yasuyuki Omichi,Daisuke Hamada,Koichi Sairyo

DOI: https://doi.org/10.1016/j.jos.2023.01.012

Abstract:Background: This study evaluated the accuracy of the cup alignment angles and spatial cup positioning on computed tomography (CT) images in patients with osteoarthritis secondary to developmental dysplasia of the hip (DDH) who underwent total hip arthroplasty (THA) using a minimally invasive technique via an anterolateral approach in the supine position according to whether a robotic arm-assisted system or a CT-based navigation system was used. Methods: We reviewed 60 robotic arm-assisted (RA)-THA cases and 174 navigation-assisted (NA)-THA cases. After propensity score matching, there were 52 hips in each group. Postoperative cup alignment angles and position were assessed by superimposition of a three-dimensional cup template onto the actual implanted cup using postoperative CT images with pelvic coordinates matching the preoperative planning. Results: The mean absolute error of the inclination angle and the anteversion angle between the preoperative planning and the postoperative measurement was significantly smaller in the RA-THA group (inclination, 1.1° ± 0.9; anteversion, 1.3° ± 1.0) than in the NA-THA group (inclination, 2.2° ± 1.5; anteversion, 3.3° ± 2.5). For acetabular cup positioning, the mean discrepancy between the preoperative planning and the postoperative measurement was 1.3 ± 1.3 mm on the transverse axis, 2.0 ± 2.0 mm on the longitudinal axis, and 1.3 ± 1.7 mm on the sagittal axis in the RA-THA group and 1.6 ± 1.4 mm, 2.6 ± 2.3 mm, and 1.8 ± 1.3 mm, respectively, in the NA-THA group. High precision of cup positioning was observed in both groups with no statistically significant difference. Conclusion: Robotic arm-assisted THA using a minimally invasive technique via an anterolateral approach in the supine position allows accurate cup placement in patients with DDH.
[Total Hip Arthroplasty with Uncemented Cup and Femoral Head Autografts for Coxarthrosis Due to Dysplasia].

Li-dong Wu,Yan Xiong,Shi-gui Yan,Quan-sen Yang,Rong-xin He,Qiang-hua Wang

DOI: https://doi.org/10.3760/j:issn:0529-5815.2004.16.012

2004-01-01

Abstract:OBJECTIVE:To evaluate the outcomes of total hip arthroplasty (THA) for coxarthrosis due to dysplasia with acetabular reconstruction of an uncemented cup in conjunction with a femoral head autograft.METHODS:A retrospective study was made on 21 hips in 20 patients (18 female and 2 male; average age, 50 years) with developmental hip dysplasia treated by THA with use of an uncemented cup. The acetabular cup was placed at the level of the true acetabulum; all patients required autogenous femoral head grafts due to acetabular deficiency. The average coverage of the acetabular cup by the femoral head autograft was 31% (range, 10% to 45%). Eight hips had less than 25% cup coverage and 13 between 25% and 50%. The average follow-up period was 4.7 years (range, 1-8 years). All patients were evaluated with the use of a modified Harris hip score. Radiographic evaluations were made by preoperative and follow-up.RESULTS:All autografts were seen to be united to host-bone. No collapse of the autograft and no hip had the evidence of loosening of component seen in all patients. According to the modified Harris hip score, the average hip score increased from 46 at preoperation to 89 at the final review. Preoperative leg-length discrepancy was greater than 2 cm seen in all except 1 patient with bilateral hip dysplasia. After surgery, only 2 of 20 patients still had a leg-length discrepancy greater than 1 cm. Three hips showed minor resorption in the lateral portion of the graft which was not supporting the cup. Three hips developed grade 1 Brooker heterotopic ossification and one had grade 2.CONCLUSIONS:THA with an uncemented cup in conjunction with a femoral head autograft for coxarthrosis due to dysplasia could obtain favorable results. This method could provide reliable acetabular fixation and appeared to restore acetabular bone stock in patients with developmental hip dysplasia when the coverage of the cementless cup by the graft does not exceed 50%.
Acetabular Diameter Assessment and Three-Dimensional Simulation for Acetabular Reconstruction in Dysplastic Hips

Xi Chen,Songlin Li,Xingyu Liu,Yiou Wang,Ruichen Ma,Yiling Zhang,Wenwei Qian

DOI: https://doi.org/10.1016/j.arth.2023.01.067

IF: 4.435

2023-02-01

The Journal of Arthroplasty

Abstract:BACKGROUND: This study aimed to investigate the relationship between acetabular width, three-dimensional (3D) simulation, and surgical results in total hip arthroplasty patients who have developmental dysplasia of the hip (DDH).METHODS: This retrospective study included 216 DDH cases. Inner and outer acetabular width (OAW) was measured at the plane passing through the center of acetabular fossa. 3D simulation and 2D standard templating were performed. The actual cup size and the use of augments during surgery were recorded. Association among the indices and their distribution in different types of DDH were analyzed.RESULTS: A difference of 13 to 14 millimeters (mm) was found between the inner acetabular width and actual cup size used in type II, III, and IV cases, while the difference was 0.2 to 3.6 mm for OAW. The accuracy of 2D templating and 3D simulation in predicting cup size was comparable in Crowe type I (86.5 versus 76%, P = .075), type II (72.7 versus 51.5%, P = .127), and type III (93.3 versus 66.7%, P = .169). The 3D simulation was significantly more accurate in Crowe type IV (89.1% versus 60.9%, P = .001). Augments and bone grafts were significantly more commonly used in type II (25%) than in the other types (0 to 6.5%).CONCLUSION: OAW more accurately predicted actual cup size than inner acetabular width. The supero-lateral acetabular bone defects in type II cases require additional attention. Compared with 2D templating, 3D simulation is more accurate in predicting actual cup size in dysplastic hips with severe deformity and may be recommended in these selected cases, especially for Crowe IV patients.

orthopedics
Short-term outcome of artificial intelligence-assisted preoperative three-dimensional planning of total hip arthroplasty for developmental dysplasia of the hip compared to traditional surgery

Long Wu,Xiao-Chun Yang,Jiang Wu,Xin Zhao,Zhi-Dong Lu,Peng Li

DOI: https://doi.org/10.52312/jdrs.2023.1076

2023-09-16

Joint Diseases and Related Surgery

Abstract:OBJECTIVES: This study aims to assess the short-term outcome of total hip arthroplasty for treating developmental dysplasia of the hip (DDH) using artificial intelligence (AI)-assisted three-dimensional (3D) preoperative planning technology.PATIENTS AND METHODS: Between January 2020 and July 2022, a total of 61 patients with DDH (31 males, 30 females, mean age: 59.2±10.4 years; range, 35 to 78 years) were retrospectively analyzed. The patients were divided into two groups as those in the observation group of AI-assisted 3D preoperative planning technology (n=34) and the control group of traditional two-dimensional X-ray template planning technology (n=27). Perioperative data of the patients were recorded and analyzed.RESULTS: All patients were followed for more than one year, and no hip dislocation, aseptic loosening, periprosthetic fracture, periprosthetic infection or revision occurred. The accuracy of the planning was based on the agreement between the preoperative planning model and the intraoperative model. The accuracy of preoperative planning for the acetabular prosthesis and femoral prosthesis in the observation group was significantly higher than in the control group. No statistically significant difference was found in the postoperative abduction (p=0.416) and anteversion (p=0.225) between the groups. In the observation group, 91.2% of the acetabular cups were implanted within the Lewinnek safe zone (66.7% in the control group) and 88.2% were within the Callanan safe zone (63% in the control group). There was a statistically significant difference between the two groups in terms of the postoperative lower-limb length discrepancy (p=0.004), which was significantly improved in both groups compared to preoperative values (p<0.01 for all). The postoperative Harris hip score in both groups was significantly improved compared to preoperative scores (p<0.01); however, there was no statistically significant difference between the two groups (p=0.098).CONCLUSION: Our study results suggest that AI-assisted 3D preoperative planning is evidently more successful than traditional 2D X-ray template planning for predicting prosthesis size. This method seems to be advantageous in acetabular cup positioning, as well as in lower-limb length restoration.

surgery,orthopedics
The Effect of the Morphology of the Femur and Acetabulum in Dysplastic Hips on the Selection of Arthroplasty Femoral Implants: A Computer Tomography‐Based Study

Xi Chen,Songlin Li,Xingyu Liu,Hongjun Xu,Qinlu Wang,Yiling Zhang,Wenwei Qian

DOI: https://doi.org/10.1111/os.14213

2024-09-01

Orthopaedic Surgery

Abstract:Femoral anteversion, acetabular anteversion, and combined anteversion show significant differences among patients with developmental dysplasia of the hip (DDH) of different Crowe types. Femoral anteversion >32° and combined anteversion >51° demonstrated good predictive value for the use of S‐ROM modular stem in patients undergoing total hip arthroplasty for DDH. Objectives Due to the technical challenges associated with femoral reconstruction in total hip arthroplasty for patients with developmental dysplasia of the hip (DDH), the exact indications for using femoral modular stems, despite their satisfactory clinical outcomes, remain poorly investigated. This study sought to assess the morphology of the femur and acetabulum, and to investigate the discriminative ability of femoral anteversion (FA), acetabular anteversion (AA), and combined anteversion (CA) on the selection of femoral modular stem in dysplastic hips. Methods Retrospective data were collected from multiple centers on a total of 230 cases who underwent THA due to DDH from January 1, 2020, to March 1, 2023. There were 46 males and 184 females, with an average age of 51.57 ± 14.87. Patients were stratified according to Crowe and Eftekhar classifications. FA, AA, and CA were measured using computed tomography (CT). The distribution of these indices in different grades of dysplastic hips was compared, and the correlation between these indices and the selection of femoral modular stem was analyzed. Receiver operating characteristic (ROC) and likelihood statistics were performed to investigate the discriminating and predictive value of each index in selecting modular stem. Results Two hundred and thirty hips were included in the study. FA increased as the subluxation percentage increased: type I, 21.5°; type II, 28.6°; type III, 34.9°; and type IV, 39.7°. AA was smaller in type I (16.9°) and higher in types II, III, and IV (18.9–22.6°). The area under the curve for the modular stem was 0.87 for FA, 0.86 for CA, and 0.65 for AA. The optimal cutoff values were FA > 32.6°, CA > 50.7°, and AA > 23.3°. Conclusion Excessive AA and femoral anteversion FA were observed in Crowe types II, III, and IV cases. FA and CA demonstrated strong discriminative ability and predictive value in the selection of a modular stem. The best cutoff values were ≥32.6° for FA and ≥50.7° for CA in discriminating the use of modular stem. Surgeons may contemplate the use of a modular stem when the preoperative evaluation approaches the cutoff value.

orthopedics
Is AI 3D-printed PSI an accurate option for patients with developmental dysplasia of the hip undergoing THA?

Han Zheng,Eryou Feng,Yao Xiao,Xingyu Liu,Tianyu Lai,Zhibiao Xu,Jingqiao Chen,Shiwei Xie,Feitai Lin,Yiling Zhang

DOI: https://doi.org/10.1186/s12891-024-07449-3

IF: 2.562

2024-04-22

BMC Musculoskeletal Disorders

Abstract:Abstract Background In traditional surgical procedures, significant discrepancies are often observed between the pre-planned templated implant sizes and the actual sizes used, particularly in patients with congenital hip dysplasia. These discrepancies arise not only in preoperative planning but also in the precision of implant placement, especially concerning the acetabular component. Our study aims to enhance the accuracy of implant placement during Total Hip Arthroplasty (THA) by integrating AI-enhanced preoperative planning with Patient-Specific Instrumentation (PSI). We also seek to assess the accuracy and clinical outcomes of the AI-PSI (AIPSI) group in comparison to a manual control group. Methods This study included 60 patients diagnosed with congenital hip dysplasia, randomly assigned to either the AIPSI or manual group, with 30 patients in each. No significant demographic differences between were noted the two groups. A direct anterior surgical approach was employed. Postoperative assessments included X-rays and CT scans to measure parameters such as the acetabular cup anteversion angle, acetabular cup inclination angle, femoral stem anteversion angle, femoral offset, and leg length discrepancy. Functional scores were recorded at 3 days, 1 week, 4 weeks, and 12 weeks post-surgery. Data analysis was conducted using SPSS version 22.0, with the significance level was set at α = 0.05. Results and conclusion The AIPSI group demonstrated greater prosthesis placement accuracy. With the aid of PSI, AI-planned THA surgery provides surgeons with enhanced precision in prosthesis positioning. This approach potentially offers greater insights and guidelines for managing more complex anatomical variations or cases.

rheumatology,orthopedics
Three-dimensional femoral morphology in Hartofilakidis type C developmental dysplastic hips and the implications for total hip arthroplasty

Zhaolun Wang,Hua Li,Yixin Zhou,Wang Deng

DOI: https://doi.org/10.1007/s00264-020-04661-3

IF: 3.479

2020-01-01

International Orthopaedics

Abstract:Purposes The aim of this study was to describe and compare the femoral morphologies of Hartofilakidis types C1 and C2 developmental dysplasia of the hip (DDH), and discuss the potential influence on subsequent total hip arthroplasty (THA). Methods We analyzed preoperative CT data from 81 patients (42 C1 and 39 C2 subtypes) who underwent THA for arthritis secondary to Hartofilakidis type C DDH. The CT data was three-dimensionally reconstructed and measured of following parameters: neck-shaft angle, femoral neck length, anteversion, medial inclination, femoral offset, height of the greater trochanter and femoral head, mediolateral (ML) and anteroposterior (AP) widths of the medullary canal. The canal flare indices and ML-to-AP ratio were further calculated. We also reviewed surgical and follow-up records to compare the different implants utilized and the clinical results between C1 and C2 hips. Results The C2 femurs had a significantly lower neck-shaft angle (119.0° vs. 124.0°), shorter femoral neck (37.0 mm vs. 41.2 mm), larger medial cortical inclination (158.8° vs. 149.1°), and higher position of the greater trochanter. The C2 femurs were narrower and had a smaller canal flare index (2.88 ± 0.50) than C1 femurs (3.64 ± 0.69). The ML-to-AP ratio of the proximal femoral medullary canal was significantly smaller in the C2 group. Accordingly, C2 femurs required thinner stems, more non-sprouted sleeves, and had a higher rate and required a longer length of shortening osteotomies. At an average follow-up of 36.0 months, the C1 and C2 groups had a similar Harris Hip Score (83.5 ± 14.3 vs. 84.2 ± 9.8, P = 0.771) and no stem loosening occurred in either group. Conclusion C1 and C2 proximal femurs have substantial differences in the coronal, sagittal, and axial planes. In the setting of THA, C2 femurs may therefore require thinner stems, more non-sprouted sleeves, and have a higher rate and require a longer length of shortening osteotomies.
Robotic-assisted total hip arthroplasty in patients with developmental dysplasia of the hip

Zhang, Shuai,Ma, Mingyang,Kong, Xiangpeng,Zhou, Yonggang,Chen, Jiying,Chai, Wei

DOI: https://doi.org/10.1007/s00264-024-06115-6

IF: 3.479

2024-02-16

International Orthopaedics

Abstract:Due to the morphological diversity of deformities, technical difficulties, improperly designed components, and so on, THA remains a challenging task in dysplastic hips, especially in highly dislocated hips. The purpose of this study was to comprehensively evaluate the clinical outcomes of robot-assisted THA in patients with DDH through a large cohort study, including the precision of acetabular cup positioning, indicators of inflammatory response, indicators of muscle damage, and complications.

orthopedics

Primary neoplasms in vesical diverticula: report of 10 cases.

Management of malignant tumors of the anterior skull base: experience with 76 patients.

The accuracy and reliability of preoperative digital 2D templating in prosthesis size prediction in uncemented versus cemented total hip arthroplasty: a systematic review and meta-analysis

Comparison of three-versus two-dimensional pre-operative planning for total hip arthroplasty

Accuracy and clinical role of digital templating for total knee arthroplasty performed on haemophilic knees

Automated Digital Templating of Component Sizing is Accurate in Robotic Total Hip Arthroplasty when Compared to Predicate Software

Total Hip Arthroplasty with Cementless Cups and Femoral Head Autografts for Patients with Hip Dysplasia and Osteoarthritis

Three-dimensional templating in hip arthroplasty: the basis for template-directed instrumentation?

How to perform correct templating in total hip replacement

Validation of mediCAD® software for fully digital preoperative planning of total hip arthroplasty: a retrospective study

[Total Hip Arthroplasty for Crowe Type IV Developmental Dysplasia of the Hip with S-ROM Prosthesis].

The accuracy of digital templating in the preoperative planning of total knee arthroplasties: A systematic review and meta-analysis

Two-Dimensional Versus Three-Dimensional Preoperative Planning In Total Hip Arthroplasty

Robotic arm-assisted total hip arthroplasty via a minimally invasive anterolateral approach in the supine position improves the precision of cup placement in patients with developmental dysplasia of the hip

[Total Hip Arthroplasty with Uncemented Cup and Femoral Head Autografts for Coxarthrosis Due to Dysplasia].

Acetabular Diameter Assessment and Three-Dimensional Simulation for Acetabular Reconstruction in Dysplastic Hips

Short-term outcome of artificial intelligence-assisted preoperative three-dimensional planning of total hip arthroplasty for developmental dysplasia of the hip compared to traditional surgery

The Effect of the Morphology of the Femur and Acetabulum in Dysplastic Hips on the Selection of Arthroplasty Femoral Implants: A Computer Tomography‐Based Study

Is AI 3D-printed PSI an accurate option for patients with developmental dysplasia of the hip undergoing THA?

Three-dimensional femoral morphology in Hartofilakidis type C developmental dysplastic hips and the implications for total hip arthroplasty

Robotic-assisted total hip arthroplasty in patients with developmental dysplasia of the hip