Reply to letter: "Regional cerebral oxygen saturation monitoring during cardiac arrest".

S. Parnia

DOI: https://doi.org/10.1016/j.resuscitation.2014.03.011

IF: 6.251

2014-09-01

Resuscitation

Abstract:

What problem does this paper attempt to address?

Determination of Apparent Drug Permeability Coefficients Through Chitosan-Sodium Cellulose Sulfate Polyelectrolyte Complex Films

Zhu Li-Ying,Yan Xiao-Qin,Zhang Hong-Man,Lin Dong-Qiang,Yao Shan-Jing,Jiang Ling

DOI: https://doi.org/10.3866/pku.whxb201312091

2014-01-01

Abstract:The permeability coefficient is a fundamental parameter for devices exploiting the controlled drug-release behavior of films composed of chitosan and sodium cellulose sulfate (NaCS). Here, the transport of two model drugs with different solubilities, i.e., paracetamol and 5-aminosalicylic acid (5-ASA), was studied. The results showed that the permeability of the chitosan/NaCS film was closely related to the swelling properties. In addition, both the permeability and swelling properties of the chitosan/NaCS film were significantly influenced by the mass ratio of chitosan to NaCS, the molecular weights (M-w) of chitosan and NaCS, and the pH value. The permeability of paracetamol across the film was also investigated in simulated gastrointestinal solutions in in vitro tests. The results showed that the films have gastro-, intestine-, and colon-targeting drug-release properties when they are exposed to simulated gastrointestinal fluids in sequence.
Effect of Crosslinking Agents on Chitosan Hydrogel Carriers for Drug Loading and Release for Targeted Drug Delivery

Md Salah Uddin,Suyash Khand,Chao Dong

DOI: https://doi.org/10.3390/gels10070421

IF: 4.6

2024-06-27

Gels

Abstract:Numerous studies report on chitosan hydrogels in different forms, such as films, porous structures, nanoparticles, and microspheres, for biomedical applications; however, this study concentrates on their modifications with different crosslinking agents and observes their effects on drug loading and releasing capacities. Linear chitosan, along with chitosans crosslinked with two major crosslinkers, i.e., genipin and disulfide, are used to formulate three different hydrogel systems. The crosslinking process is heavily impacted by temperature and pH conditions. Three different drugs, i.e., thymoquinone, gefitinib, and erlotinib, are loaded to the hydrogels in de-ionized water solutions and released in phosphate-buffered solutions; thus, a total of nine combinations are studied and analyzed for their drug loading and releasing capabilities with ultraviolet–visible (UV–Vis) spectroscopy. This study finds that thymoquinone shows the lowest loading efficacy compared to the two other drugs in all three systems. Gefitinib shows stable loading and releasing regardless of crosslinking system, and the genipin-crosslinked system shows stable loading and releasing with all three drug molecules. These experimental results agree well with the findings of our previously published results conducted with molecular dynamics simulations.

polymer science
Arterial-phase contrast-enhanced ultrasonography for evaluating anti-angiogenesis treatment: a pilot study.

Keiko Yoshida,T. Hirokawa,F. Moriyasu,Longzhong Liu,Guang-Jian Liu,Masahiko Yamada,Y. Imai

DOI: https://doi.org/10.3748/wjg.v17.i8.1045

IF: 5.374

2011-02-28

World Journal of Gastroenterology

Abstract:AIM To verify whether arterial-phase contrast-enhanced ultrasonography (CEUS) of tumor parenchymal tissue is useful for evaluation of anti-angiogenesis agents. METHODS Rabbits with liver tumor were subjected to CEUS, and images of the nodular maximal diameter in vascular phase were recorded. Image analysis was performed to plot the time intensity curve (TIC) at the tumor parenchyma, which set the diameter of the region of interest of intensity measurement. The TIC was calculated to obtain the time to peak intensity (TPI) and the magnitude of PI. Rabbits were randomly assigned to a treatment group with sorafenib and a control group. Two weeks later, the same ultrasound examination was repeated followed by pathological testing to assess the effect of sorafenib on the liver tumor. RESULTS In four rabbits in the treatment group, the rate of change of tumor size was decreased compared with that of the control (the rate 2.3 vs 7.9, P = 0.02). The TPI of the treatment group elongated significantly (the rate 3.1 vs 1.1, P = 0.07 for SonoVue, 2.0 vs 0.88, P = 0.09 for Sonazoid). The magnitude of PI showed no significant changes. In pathological examination, capillary diameters in the treatment group were significantly smaller than those in the control group (26.4 vs 42.8 μm, P = 0.013). CONCLUSION Analysis of the TIC in the arterial phase of tumor tissue could evaluate the efficacy of anti-angiogenesis drug treatment in liver tumor.
Study of factors affecting the in vitro release of diclofenac sodium from hypromelose-based gels

Elena Bezuglaya,Hanna Ivashchenko,Nikolay Lyapunov,Igor Zinchenko,Anna Liapunova,Yurij Stolper,Oleksii Liapunov,Tetiana Pukhova

DOI: https://doi.org/10.15587/2519-4852.2021.243040

2021-10-29

Abstract:The aim of our study was to identify factors affecting the in vitro release of diclofenac sodium (DS) from hypromellose-based gels (HPMC). Materials and methods. Gels with HPMC and liquids without HPMC were studied by viscosity-rotating viscometer method and spin probe electron paramagnetic resonance spectroscopy. Rheograms were used to determine the flow behavior and the apparent viscosity, and the EPR spectra were used to determine the rotational correlation time (τ–1) of the dissolved spin probes. The in vitro release tests were performed using vertical diffusion cells according to a validated procedure. The assay of DS and isopropyl alcohol (IPA) in the receptor medium was performed by high performance liquid chromatography (HPLC) and gas chromatography (GC) according to validated procedures, and the water content was determined using semi-micro method. Results. The apparent viscosity of the gels increased with increasing HPMC content and depended on the HPMC grade. The high apparent viscosity of the gels did not affect the values of τ–1 of the dissolved spin probes. In viscous gels and Newtonian fluids, the composition of which corresponded to the dispersion medium of gels, the values of τ–1 were identical and were in the range of rapid rotation, which is a prerequisite for similar and rapid release of the dissolved substances from gels and liquids. It was shown that the HPMC-based gel and Newtonian liquid without HPMC in terms of in vitro release parameters DS and IPA were equivalent. During in vitro testing the release of dissolved DS increased with increasing its concentration in the gel and depended on the dispersed state of DS. When the content of IPA was changed from 45.0 % to 22.5 %, the water absorption by the gel and the release of IPA decreased, and the release of DS increased, which was due to the decrease in the solubility of DS in the gel. Conclusions. HPMC, which provided high apparent viscosity of the gels, did not affect the value of τ–1 of the dissolved spin probes and the in vitro release of DS from the gels. The gel and Newtonian liquid were equivalent in terms of in vitro release of DS and IPA. The release of DS altered proportionally with the concentration of DS and depended on its dispersed state. As the content of IPA decreased, the release of IPA decreased, but the release of DS increased because of the decrease in the solubility of the DS in the gel
Synthesis and Characterization of Lyophilized Chitosan-Based Hydrogels Cross-Linked with Benzaldehyde for Controlled Drug Release

Fouad Damiri,Yahya Bachra,Chaimaa Bounacir,Asmae Laaraibi,Mohammed Berrada

DOI: https://doi.org/10.1155/2020/8747639

2020-05-18

Journal of Chemistry

Abstract:In this study, chitosan-based hydrogels were produced by incorporating three drugs with a different solubility into a polymer matrix. The lyophilized chitosan salt was prepared using an innovative and less-expensive synthetic process by the freeze-drying technique. Firstly, the three drugs (caffeine, ascorbic acid, and 5-fluorouracil (5-FU)) were selected as model drugs to test the in vitro release behavior of the hydrogel. The drugs were solubilized in chitosan salt, lyophilized, and cross-linked with benzaldehyde involving the formation of a Schiff base with (–C=N-) linkage to produce a physical hydrogel. Subsequently, the physicochemical properties of N-benzyl chitosan and lyophilized chitosan salt were evaluated by Fourier-transform infrared (FTIR) spectra, scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). The intrinsic viscosity of the conventional chitosan was determined by the Mark–Houwink–Sakurada equation. Moreover, the kinetics of hydrogel swelling and drug release were studied by the UV-visible method at physiological conditions (pH = 7.4 at 37°C). The results show that lyophilized N-benzyl chitosan had a maximum swelling ratio of 720 ± 2% by immersion in phosphate-buffered saline solutions (PBS) (pH = 7.4 at 37°C). In vitro drug releases were evaluated in PBS, and the obtained results show that the maximum drug release after 24 h was 42% for caffeine, 99% for 5-FU, and 94% for ascorbic acid. Then, to optimize the cumulative release of caffeine, Tween 20 was added and 98% as a release percentage was obtained. The drug-loading results were investigated with the Korsmeyer–Peppas kinetic model and applied to determine the drug release mechanism.

chemistry, multidisciplinary
Effect of Polymer Concentration and Crosslinking Time On Drug Release from Microspheres of Mucuna Gum

DOI: https://doi.org/10.33140/ijnn.06.02.05

2021-10-23

International Journal of Nanotechnology and Nanomedicine

Abstract:The study investigated the feasibility of delivering diclofenac sodium in microspheres of mucuna gum and whether polymer concentration and crosslinking time would affect drug release. Diclofenac sodium microspheres were successfully prepared using the chemical and thermal crosslinking method. Gluteraldehyde was used as the crosslinking agent. Thereafter, invitro release of diclofenac sodium from the microspheres was evaluated using simulated intestinal fluid as the medium. Increase in mucuna gum concentration did not delay rate of drug release but increased total cumulative drug released. Increase in crosslinking time slowed down release of the drug from the microspheres, an indication that modification of crosslinking time is important for sustained release. This could contribute towards producing sustained release diclofenac sodium which will improve patient compliance as a result of subsequent reduction in dosing frequency. None of the batches gave 100% drug release. This being the case, drug loading can be modified for optimum therapeutic effect.
Investigation of Factors Affecting Particle Size Distribution and Sustained Release of a Water-Soluble Drug from Cellulose Derivatives Microspheres

Meryem Mouffok,Ilham Abdelmalek,Abderrezzak Mesli,Awatif Amaria Moulay

DOI: https://doi.org/10.1007/s42250-022-00323-6

2022-02-05

Chemistry Africa

Abstract:Microspheres loaded by 2-aminopyrimidine (2-AP) and based on cellulose derivatives as polymeric matrices: ethylcellulose (EC) and cellulose acetate butyrate (CAB), were prepared by double emulsion solvent evaporation method (w/o/w). The main objective of this research is to conceptualize the fabrication of new formulations with high encapsulation efficiency and a large range of size for a controlled drug release of a water-soluble drug. The effects of the process variables, namely, nature of the matrix, stirring speed, surfactant nature and concentration on the mean particle size and distribution, drug loaded, encapsulation efficiency and drug release were investigated. The microspheres were characterized by SEM, optical microscopy, FT-IR spectroscopy and the size and size distribution (δ) were determined. SEM images showed spherical and porous microspheres with different structures. We have obtained systems with large ranges of size (d32, 45–219 µm with EC; d32, 37–160 µm with CAB using Polyvinyl alcohol (PVA) as emulsifier; and d32, 294–779 µm with Tween 80) by modifying the process parameters. Furthermore, the mean diameter d32 and the dispersion can be controlled particularly by stirring speed of emulsion and the emulsifier nature and concentration. The drug entrapment and encapsulation efficiency were improved by controlling certain factors, especially by using PVA as a stabilizer in the continuous phase, by increasing PVA concentration (2% PVA) and when using EC as a matrix. The drug release was established in simulated gastric medium at pH 1.2 and 37 °C by UV–Vis analysis to estimate the drug content. The kinetics results revealed that the drug release is governed by the diffusion mechanism and the release rate can be adjusted by varying the encapsulation factors that have a significant effect on the particle size and size distribution.Graphical abstract
Exploring Microstructural Changes in Structural Analogues of Ibuprofen-Hosted In Situ Gelling System and Its Influence on Pharmaceutical Performance

Sharvil S. Patil,Edakkal Venugopal,Suresh Bhat,Kakasaheb R. Mahadik,Anant R. Paradkar

DOI: https://doi.org/10.1208/s12249-015-0308-y

IF: 3.3

2015-02-26

AAPS PharmSciTech

Abstract:ABSTRACTThe present work explores inner structuration of in situ gelling system consisting of glyceryl monooleate (GMO) and oleic acid (OA). The system under study involves investigation of microstructural changes which are believed to govern the pharmaceutical performance of final formulation. The changes which are often termed mesophasic transformation were analysed by small angle X-ray scattering (SAXS), differential scanning calorimetry (DSC), rheology and plane polarised light (PPL) microscopy. The current work revealed transformation of blank system from W/O emulsion to reverse hexagonal structure upon addition of structural analogues of ibuprofen. Such transformations are believed to occur due to increased hydrophobic volume within system as probed by SAXS analysis. The findings of SAXS studies were well supported by DSC, rheology and PPL microscopy. The study established inverse relationship between log P value of structural analogues of ibuprofen and the degree of binding of water molecules to surfactant chains. Such relationship had pronounced effect on sol–gel transformation process. The prepared in situ gelling system showed sustained drug release which followed Higuchi model.

pharmacology & pharmacy
Variation of in situ Gelling Hydrogel Water Content with the Osmotic Pressure and its Impacts on Drug Release

Jia-li SUN,Guo-qiang JIANG,Yu-jie WANG,Shi-fu TANG,Fu-xin DING

DOI: https://doi.org/10.3969/j.issn.1003-9015.2012.04.005

2012-01-01

Abstract:The in situ gelling hydrogel shows considerable promise for injectable implant drug delivery.The water in the hydrogel,which plays the important role of storing drug and maintaining the hydrogel network,is considered to be significantly influenced by the osmotic pressure of the drug release environment.The present work,taking chitosan/glycerophosphate(CS/GP) thermosensitive hydrogel(a widely studied in situ gelling hydrogel) for instance,investigated the variation of hydrogel water content with the osmotic pressure and its impacts on drug release in vitro and in vivo.After the hydrogel was implanted into the SD rats,the water content of the CS/GP hydrogel,especially its free water content,quickly reduces and finally approaches the water content of the surrounding tissue.This case is far different from swelling and erosion process of the hydrogel in vitro because the osmotic pressures are different between the biological tissue and the in vitro release medium.The osmosis in vivo was simulated by adding PEG into the release medium and the impacts of water losing on drug release were explored.The results show that the quickly losing of free water containing drug causes the initial drug burst release,and causes the crystallization of the remained drug and the compaction of the hydrogel network which greatly hindered the subsequent drug release.The hydrogel water content variation should be governed for controlled drug release of the hydrogel.
Advances in Treatment of Bipolar Disorders.

J. Cookson

Abstract:We may not be able to make you love reading, but advances in treatment of bipolar disorders will lead you to love reading starting from now. Book is the window to open the new world. The world that you want is in the better stage and level. World will always guide you to even the prestige stage of the life. You know, this is some of how reading will give you the kindness. In this case, more books you read more knowledge you know, but it can mean also the bore is full.
Experiments and modeling of controlled release behavior of commercial and model polymer-drug formulations using dialysis membrane method

Alok Ranjan,Prateek K Jha

DOI: https://doi.org/10.1007/s13346-019-00696-1

Abstract:Standard dissolution testing methods typically do not correlate strongly with the in vivo drug release behavior for the oral delivery products, since they only focus on the drug dissolution in the gastric/intestinal fluid and do not account for the intestinal absorption of drug. Artificial gastrointestinal systems attempt to bridge this gap by using dialysis membranes as a proxy for the intestinal membranes. We present a systematic proof-of-concept study of how the drug dissolution and drug absorption are mimicked in such systems for the case of polymer-drug formulations. We utilize a modified version of the conventional shaking-flask test, in which the drug formulation is placed inside a dialysis bag. Dissolution experiments are performed on a commercial aspirin formulation and model formulations of aspirin with varying amounts of poly-methyl-methacrylate-co-methacrylic acid (PMA-MAA), both for conventional and modified shaking-flask test. Results are successfully interpreted using a simple model that assumes first-order kinetics for both the drug release from the formulation and drug permeation through the membrane. The differences between the model and commercial formulations and the effects of shaking speed and drug loading are established by comparison of the first-order rate constants. Finally, comparison with a reported in vivo study demonstrates how the modified shaking-flask setup can be used to improve the in vitro in vivo correlation. Graphical abstract.
Impact of Hot-Melt Extrusion on Glibenclamide's Physical and Chemical States and Dissolution Behavior: Case Studies with Three Polymer Blend Matrices

Nina Zupan,Ines Yous,Florence Danede,Jeremy Verin,Mostafa Kouach,Catherine Foulon,Emeline Dudognon,Susanne Florin Muschert

DOI: https://doi.org/10.3390/pharmaceutics16081071

IF: 6.525

2024-08-15

Pharmaceutics

Abstract:This research work dives into the complexity of hot-melt extrusion (HME) and its influence on drug stability, focusing on solid dispersions containing 30% of glibenclamide and three 50:50 polymer blends. The polymers used in the study are Ethocel Standard 10 Premium, Kollidon SR and Affinisol HPMC HME 4M. Glibenclamide solid dispersions are characterized using thermal analyses (thermogravimetric analysis (TGA) and differential scanning calorimetry), X-ray diffraction and scanning electron microscopy. This study reveals the transformation of glibenclamide into impurity A during the HME process using mass spectrometry and TGA. Thus, it enables the quantification of the extent of degradation. Furthermore, this work shows how polymer-polymer blend matrices exert an impact on process parameters, the active pharmaceutical ingredient's physical state, and drug release behavior. In vitro dissolution studies show that the polymeric matrices investigated provide extended drug release (over 24 h), mainly dictated by the polymer's chemical nature. This paper highlights how glibenclamide is degraded during HME and how polymer selection crucially affects the sustained release dynamics.
Preliminary Investigation of Linum usitatissimum Mucilage-Based Hydrogel as Possible Substitute to Synthetic Polymer-Based Hydrogels for Sustained Release Oral Drug Delivery

Arshad Mahmood,Alia Erum,Sophia Mumtaz,Ume Ruqia Tulain,Nadia Shamshad Malik,Mohammed S. Alqahtani

DOI: https://doi.org/10.3390/gels8030170

IF: 4.6

2022-03-09

Gels

Abstract:The aim of this study was to investigate the potential of Linum usitatissimum mucilage, a natural polymer, in developing a sustained release hydrogel for orally delivered drugs that require frequent dosing. For this purpose, nicorandil (a model drug)-loaded hydrogels with various feed ratios of Linum usitatissimum mucilage, acrylamide (monomer) and methylene bis-acrylamide (crosslinker) were prepared. The newly synthesized hydrogel formulations were probed fundamentally with respect to swelling behaviour, solvent penetration, and the release of the drug from the hydrogels. Later, the selected formulations were further characterized by Fourier-transform infrared spectroscopy, thermal analysis, X-ray diffraction analysis, and scanning electron microscopy. The swelling coefficient demonstrated a linear relation with the polymer ratio; however, an inverse behaviour in the case of monomer and crosslinker was observed. The drug release studies, performed at pH 1.2 and 4.5 and considering the dynamic environment of GIT, demonstrated that all formulations followed the Korsmeyer–Peppas model, displaying a slow drug release via diffusion and polymer erosion. FTIR analysis confirmed the successful grafting of acrylamide on linseed mucilage. Furthermore, scanning electron microscopy revealed a clear surface morphology with folds and pinholes in the hydrogel. Therefore, based upon the in-vitro outcomes, it can be concluded that a promising sustained release hydrogel can be prepared from natural polymer, Linum usitatissimum mucilage, offering many-fold benefits over the conventional synthetic polymers for oral delivery of drugs.

polymer science
Effect of type and ratio of solubilising polymer on characteristics of hot-melt extruded orodispersible films

Ariana Qiao Jun Low,Johannes Parmentier,Yuet Mei Khong,Cherry Chang Er Chai,Thin Yu Tun,Jacqueline E Berania,Xueming Liu,Rajeev Gokhale,Sui Yung Chan

DOI: https://doi.org/10.1016/j.ijpharm.2013.07.046

2013-10-15

Abstract:In formulating an orodispersible film (ODF), it is important for polymer choice to strike a balance between mechanical properties and release rates. Studies have been done to study polymer combinations. However, there is a lack of a systematic study to determine key factors affecting these properties. We studied the effect of varying the ratios of a solubilising polymer (Kollidon(®) VA 64 or Soluplus(®)) to a film forming polymer, hydroxypropyl cellulose (HPC), on mechanical properties and release rates of hot-melt extruded ODFs using a 2(3) factorial design. The two drugs evaluated were chlorpheniramine and indomethacin. The main effects impacting mechanical properties were the drug and two-way interaction between drug and solubilising polymer. For dissolution, the main effects were the solubilising polymer; the drug; and the two-way interaction between solubilising polymer and ratio of solubilising to film forming polymer. Both drugs exhibited plasticising effects on the polymer matrix and had higher film ductility and lower film stiffness. Kollidon(®) VA 64-containing films performed better in terms of drug release whereas Soluplus(®)-containing films had better mechanical properties. The dissolution rate can be improved by decreasing film thickness. The findings of our study will be crucial to forming a robust ODF formulation.
Effect of Drug Loading Method and Drug Physicochemical Properties on the Material and Drug Release Properties of Poly (Ethylene Oxide) Hydrogels for Transdermal Delivery

Rachel Shet Hui Wong,Kalliopi Dodou

DOI: https://doi.org/10.3390/polym9070286

IF: 5

2017-07-19

Polymers

Abstract:Novel poly (ethylene oxide) (PEO) hydrogel films were synthesized via UV cross-linking with pentaerythritol tetra-acrylate (PETRA) as cross-linking agent. The purpose of this work was to develop a novel hydrogel film suitable for passive transdermal drug delivery via skin application. Hydrogels were loaded with model drugs (lidocaine hydrochloride (LID), diclofenac sodium (DIC) and ibuprofen (IBU)) via post-loading and in situ loading methods. The effect of loading method and drug physicochemical properties on the material and drug release properties of medicated film samples were characterized using scanning electron microscopy (SEM), swelling studies, differential scanning calorimetry (DSC), fourier transform infrared spectroscopy (FT-IR), tensile testing, rheometry, and drug release studies. In situ loaded films showed better drug entrapment within the hydrogel network and also better polymer crystallinity. High drug release was observed from all studied formulations. In situ loaded LID had a plasticizing effect on PEO hydrogel, and films showed excellent mechanical properties and prolonged drug release. The drug release mechanism for the majority of medicated PEO hydrogel formulations was determined as both drug diffusion and polymer chain relaxation, which is highly desirable for controlled release formulations.

polymer science
Frontier in gellan gum-based microcapsules obtained by emulsification: Core-shell structure, interaction mechanism, intervention strategies

Huihua Huang,Wenjing Yan,Shuliang Tan,Yihui Zhao,Hao Dong,Wenzhen Liao,Pengwei Shi,Xingfen Yang,Qi He

DOI: https://doi.org/10.1016/j.ijbiomac.2024.132697

Abstract:As a translucent functional gel with biodegradability, non-toxicity and acid resistance, gellan gum has been widely used in probiotic packaging, drug delivery, wound dressing, metal ion adsorption and other fields in recent years. Because of its remarkable gelation characteristics, gellan gum is suitable as the shell material of microcapsules to encapsulate functional substances, by which the functional components can improve stability and achieve delayed release. In recent years, many academically or commercially reliable products have rapidly emerged, but there is still a lack of relevant reports on in-depth research and systematic summaries regarding the process of microcapsule formation and its corresponding mechanisms. To address this challenge, this review focuses on the formation process and applications of gellan gum-based microcapsules, and details the commonly used preparation methods in microcapsule production. Additionally, it explores the impact of factors such as ion types, ion strength, temperature, pH, and others present in the solution on the performance of the microcapsules. On this basis, it summarizes and analyzes the prospects of gellan gum-based microcapsule products. The comprehensive insights from this review are expected to provide inspiration and design ideas for researchers.
DEVELOPMENT AND EVALUATION OF IVABRADINE HCI-LOADED POLYMERIC MICROSPHERES PREPARED WITH EUDRAGIT L100-55 (METHACRYLIC ACID-ETHYL ACRYLATE COPOLYMER) AND ETHYL CELLULOSE FOR CONTROLLED DRUG RELEASE

Abdul Majeed,Nazar Muhammad Ranjha,Muhammad Hanif,Ghulam Abbas,Mahtab Ahmad Khan

Abstract:The objective of this study was to prepare and evaluate ivabradine HCl-loaded microspheres consisting of Eudragit LIOO-55 and ethyl cellulose prepared by oil-in-oil solvent evaporation method. Ivabradine HCl was encapsulated into microspheres by in situ method. The resultant microspheres were characterized with respect to drug loading, flow properties, Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), X-ray diffractometry (XRD), thermal analysis and release behavior. Chemical stability of IBH after being encapsulated into microspheres was confirmed by FTR, DSC and XRD. FTIR spectra reflect- ed no interaction between drug and excipients. TGA indicates that prepared microspheres showed much better thermal stability than pure drug ivabradine. SEM images showed formulation of microspheres in spherical shape. The maximum perceniage entrapment efficiency was found to be 81 ± 2.15 and percentage yield was 88 ± 2.65. The maximum in vito drug release was 94.5% for the pH 7.4 and demonstrated that all drug-loaded formulations had a pH-dependent drug release. The cumulative drug release data were analyzed by applying different kinetic models. Korsmeyer-Peppas equation was used to determine value of n which follows non-Fickian diffusion.
[Isolation of messenger RNAs from thyroglobulin and their translation in the oocyte of Xenopus].

G. Vassart,H. Brocas,P. Nokin,J. Dumont

1973-10-01

Abstract:
Stability Development, Optimization and Evaluation of Gastro-Retentive Microspheres of Antidiabetic Agent by Full Factorial Design

Yogesh Baburao Raut,Kalyan Chakravarthy Janjanam,Trinayan Deka,Vijay Gajananrao Thakare,Pramod Khobragade,Arul Prakasam K C,Ravindra Chandrakant Sutar,Rahul L Shirole

DOI: https://doi.org/10.62958/j.cjap.2024.019

2024-08-06

Abstract:Objective: This work is aimed to Formulate, Optimize and Evaluate Gastro-Retentive Microspheres of Antidiabetic Agent by Full Factorial Design. Methods: Microspheres were prepared using Emulsification-cross linking technique. To this HPMC-K4M and Carbopol was dissolved in 250 ml of water and allowed to swell for 24 hr at room temperature. And separately chitosan was dissolved in 3% (v/v) glacial acetic acid and this also kept for 24 h to swell or dissolve properly. After 24hr this swelled mixture was mixed under magnetic stirrer (Remi, India) at specific stirring rate for 1hr in order to find homogeneous mass of both the gum. Then slurry of chitosan also was homogenized for half an hour. The drug, Glipizide (1g) was then added to the chitosan solution and mixed homogenesously. Results: The aim of the study was to formulate and evaluate microspheres, for Gastro-Retentive Microspheres of the chosen drug. The EE of microspheres was found to be 91.52%, maximum . Buoyancy property observed was 93.82% for Optimized formulation F-9, Drug release 57.34% till 8 h. The work also aims to study various parameters affecting the behaviour of microspheres in oral dosage form. Conclusion: Drugs with short half-life that are absorbed from the gastrointestinal tract (GIT) are eliminated rapidly from the blood flow. To avoid this, the oral SR Gastro-retentive was developed as this formulation released the drug slowly into the GIT and maintained a stable drug concentration in the serum for a longer duration of time.
Preparation and Properties of Crosslinked Chitosan Thermosensitive Hydrogel for Injectable Drug Delivery Systems

Jia Zan,Huanhuan Chen,Guoqiang Jiang,Ying Lin,Fuxin Ding

DOI: https://doi.org/10.1002/app.23613

IF: 3

2006-01-01

Journal of Applied Polymer Science

Abstract:The aim of this study was to prepare and investigate the physical properties of a thermosensitive crosslinked chitosan pregel solution, and evaluate the in vitro release profiles of macromolecules from this sol-gel transition system. Chitosan and poly (vinyl alcohol) were used to form an interpenetrating polymeric network with glutaraldehyde as the crosslinker, and glycerophosphate (GP) was added to transform the pH-dependent solutions into thermosensitive pH-dependent solutions. Rheological study showed that the gelation was dependent on the crosslink degree and GP concentration of the solution. The crosslinked gel had excellent mechanic properties and no apparent "pores" and formed an integrated hydrogel texture according to scanning electronic micrograph. Gas chromatography test guaranteed the medication safety with no detection of glutaraldehyde remnants in the hydrogels. In vitro release study showed that the gelation does not significantly affect the macromolecules diffusion but the crosslinking degree does. These results indicated that the hydrogel formed an intensified three-dimensional hybrid network with interpenetrating molecules, which effectively buffered or delayed the macromolecules diffusion. The hydrogels sustained the drug release over 30 days and could be potentially used as in situ gelling implants. (c) 2006 Wiley Periodicals, Inc.

Reply to letter: "Regional cerebral oxygen saturation monitoring during cardiac arrest".

Determination of Apparent Drug Permeability Coefficients Through Chitosan-Sodium Cellulose Sulfate Polyelectrolyte Complex Films

Effect of Crosslinking Agents on Chitosan Hydrogel Carriers for Drug Loading and Release for Targeted Drug Delivery

Arterial-phase contrast-enhanced ultrasonography for evaluating anti-angiogenesis treatment: a pilot study.

Study of factors affecting the in vitro release of diclofenac sodium from hypromelose-based gels

Synthesis and Characterization of Lyophilized Chitosan-Based Hydrogels Cross-Linked with Benzaldehyde for Controlled Drug Release

Effect of Polymer Concentration and Crosslinking Time On Drug Release from Microspheres of Mucuna Gum

Investigation of Factors Affecting Particle Size Distribution and Sustained Release of a Water-Soluble Drug from Cellulose Derivatives Microspheres

Exploring Microstructural Changes in Structural Analogues of Ibuprofen-Hosted In Situ Gelling System and Its Influence on Pharmaceutical Performance

Variation of in situ Gelling Hydrogel Water Content with the Osmotic Pressure and its Impacts on Drug Release

Advances in Treatment of Bipolar Disorders.

Experiments and modeling of controlled release behavior of commercial and model polymer-drug formulations using dialysis membrane method

Impact of Hot-Melt Extrusion on Glibenclamide's Physical and Chemical States and Dissolution Behavior: Case Studies with Three Polymer Blend Matrices

Preliminary Investigation of Linum usitatissimum Mucilage-Based Hydrogel as Possible Substitute to Synthetic Polymer-Based Hydrogels for Sustained Release Oral Drug Delivery

Effect of type and ratio of solubilising polymer on characteristics of hot-melt extruded orodispersible films

Effect of Drug Loading Method and Drug Physicochemical Properties on the Material and Drug Release Properties of Poly (Ethylene Oxide) Hydrogels for Transdermal Delivery

Frontier in gellan gum-based microcapsules obtained by emulsification: Core-shell structure, interaction mechanism, intervention strategies

DEVELOPMENT AND EVALUATION OF IVABRADINE HCI-LOADED POLYMERIC MICROSPHERES PREPARED WITH EUDRAGIT L100-55 (METHACRYLIC ACID-ETHYL ACRYLATE COPOLYMER) AND ETHYL CELLULOSE FOR CONTROLLED DRUG RELEASE

[Isolation of messenger RNAs from thyroglobulin and their translation in the oocyte of Xenopus].

Stability Development, Optimization and Evaluation of Gastro-Retentive Microspheres of Antidiabetic Agent by Full Factorial Design

Preparation and Properties of Crosslinked Chitosan Thermosensitive Hydrogel for Injectable Drug Delivery Systems