Fluosilicathaltige Gemische für den Holzschutz mit herabgesetzter eisenschädigender Wirkung

G. Becker,W. Wiederholt

DOI: https://doi.org/10.1007/BF02617129

1951-11-01

Abstract:

What problem does this paper attempt to address?

Estimating Current and Long-Term Risks of Coronary Artery in Silico by Fractional Flow Reserve, Wall Shear Stress and Low-Density Lipoprotein Filtration Rate

Haipeng Liu,Yinglan Gong,Xinyi Leng,Ling Xia,Ka Sing Wong,Shanxing Ou,Thomas W. Leung,Defeng Wang,Lin Shi

DOI: https://doi.org/10.1088/2057-1976/aa9a09

2018-01-01

Biomedical Physics & Engineering Express

Abstract:Background. Hemodynamic changes and consequent low-density lipoprotein (LDL) filtration play an important role in the atherosclerotic plaque development of coronary arteries. In this pilot controlled case study, we aimed to investigate the correlation between parameters derived from computational fluid dynamics (CFD) simulation and risks (both current and long-term) of coronary atherosclerosis. Methods. We reconstructed geometric models from the baseline computed tomography (CT) angiography of two subjects, one patient and one healthy control, and performed CFD simulations. We estimated the current risk of ischemia by fractional flow reserve (FFR). We estimated the potential risk of plaque development by wall shear stress (WSS) and LDL filtration rate with follow-up clinical imaging validation. We investigated the effects of simulation methods (transient/static) and rheological models (Newtonian/Carreau-Yasuda) by comparing the corresponding results (FFR, WSS and LDL filtration rate) in the patient's left anterior descending coronary artery. Results. In baseline CFD simulation, FFR indicated mild current ischemic risk of the patient, in accordance with existing angina pectoris. Baseline WSS and LDL filtration rate results were related with in vivo plaque development. The plaque-growth locations in follow-up CT angiogram coincided with areas of low WSS and high LDL filtration rate in the baseline simulation. The LDL filtration rate delineated more specific risky areas than WSS. Between transient and static results, the difference of FFR was less than 5% in the whole model. As to WSS and LDL filtration rate the transient/static difference was within 20% inmost areas, but rose up to 50% for WSS and even higher for LDL filtration rate, in areas with low WSS and high LDL filtration rate. As to rheological effects, Newtonian/Carreau-Yasuda difference was negligible for FFR throughout the model, within 30% for WSS and LDL filtration rate in major areas, and 50% or higher in certain segments where low. WSS and high LDL filtration rate existed. Conclusion. CFD results appeared to be related with in vivo development of coronary atherosclerosis. Simulated FFR and its threshold value 0.8 demonstrated the ischemic risk. Both WSS and LDL filtration rate could indicate areas of plaque growth.
Effect of Microcirculatory Resistance on Coronary Blood Flow and Instantaneous Wave-Free Ratio: A Computational Study.

Haipeng Liu,Shanxing Ou,Panli Liu,Yuhang Xu,Yinglan Gong,Ling Xia,Xinyi Leng,Thomas Wai Hong Leung,Lin Shi,Dingchang Zheng

DOI: https://doi.org/10.1016/j.cmpb.2020.105632

IF: 6.1

2020-01-01

Computer Methods and Programs in Biomedicine

Abstract:BACKGROUND AND OBJECTIVE:The instantaneous wave-free ratio (iFR) has been proposed to estimate the hemodynamic severity of atherosclerotic stenosis in coronary arteries. The atherosclerotic stenosis in a proximal coronary artery could change its distal microcirculatory resistance (MR). However, there is a lack of investigation about the effect of MR variation on the blood flow and iFR of stenotic coronary arteries. We aim to investigate the changes of blood flow and iFR caused by distal MR variation. METHODS:Four three-dimensional models of coronary arteries were reconstructed from the computed tomography images of two normal cases and two cases with 74.9% and 96.4% (in area) stenoses in a large branch of left anterior descending artery (LAD). Computational fluid dynamics simulation was performed on each model under 6 MR situations: hyperemia as the reference situation, resting when MR was multiplied by 8/3 in all outlet branches, h-one-1.5 and h-one-2 when MR was multiplied by 1.5 and 2.0 in one branch (the stenotic, or the corresponding branch in normal case) of LAD, h-branches-1.5 and h-branches-2 when MR was multiplied by 1.5 and 2.0 in the stenotic/corresponding and its cognate branches. Flow rate and iFR of each outlet branch were then calculated and compared between different MR situations to investigate the effect of MR variation on flow rate and iFR. RESULTS:In the 74.9% stenosed and normal cases, referring to the hyperemia situation, the increase of MR in any branch significantly decreased its flow rate and increased its iFR, with limited effect on the flow rate (<3%) and iFR (<0.01) of other branches. However, in the 96.4% stenosed case, the doubled MR in the stenosed branch (h-one-2) significantly increased the flow rate (>10%) and iFR (>0.05) of its cognate branches. CONCLUSION:The increase of MR in a normal or mildly stenosed branch of coronary artery decreases its blood flow and increases its iFR, with limited effect on other branches. Whereas, the increase of MR in a severely stenotic large branch could significantly increase the flow velocity and iFR of its cognate branches.
Effect of lesion characteristics on diagnostic performance of CT-derived fractional flow reserve: exploring the indications for application based on CT-FFR CHINA trial (Preprint)

Na Zhao,Yang Gao,Bo Xu,Weixian Yang,Lei Song,Tao Jiang,Li Xu,Hongjie Hu,Lin Li,Wenqiang Chen,Dumin Li,Feng Zhang,Lijuan Fan,Bin Liu

DOI: https://doi.org/10.2196/preprints.35006

2021-01-01

Abstract:BACKGROUND High diagnostic performance of coronary computed tomography angiography (CCTA)-derived fractional flow reserve (FFR; CT-FFR) in identifying flow-limiting stenosis has been confirmed. CT-FFR is recommended to assess the hemodynamic significance of coronary lesions. However, the optimal indications of CT-FFR relies on its ability to discriminating ischemia in situations of different types of lesions. And the effect of lesion-dependent factors on determining the diagnostic accuracy of CT-FFR have not been comprehensively evaluated yet. OBJECTIVE We aimed to investigate the effect of lesion-related factors on the diagnostic performance of CT-FFR with computational fluid dynamics algorithm, to promote the clinical application of it. METHODS This multicenter prospective clinical trial enrolled 317 patients with 30%–90% stenosis undergoing CCTA and invasive FFR from 5 centers across China. All target lesions were assigned into different lesion characteristics (target vessels, lesion location, lesion length, bifurcation lesions, and coronary calcification) subgroups. Diagnostic performance (accuracy, sensitivity, specificity, positive predictive value (PPV), negative predictive value (NPV), and area under receiver operating characteristics curve (AUC)) of CT-FFR identifying ischemia were calculated and compared in all sub-groups. RESULTS Three hundred and sixty-six target vessels from 317 patients (mean age: 59.3 ± 9.6 years) were analyzed. The overall vessel-based diagnostic accuracy, sensitivity, specificity, PPV, NPV, and AUC of CT-FFR were 87.2%, 86.4%, 88.8%, 86.9%, 88.4%, and 0.90. Absence of bifurcation lesion group possessed the higher NPV of CT-FFR than presence of bifurcation lesion group (92.8% vs. 78.9%, p = 0.006). Whereas there was no statistically significant difference in diagnostic performance of CT-FFR among different target vessels, lesion location, lesion length, and coronary calcification sub-groups (all p > 0.05). CONCLUSIONS This study supported CT-FFR as a powerful noninvasive functional assessment tool for coronary lesions with different lesion characteristics, involving target vessel, lesion location, lesion length, and coronary calcification. While the diagnostic performance of CT-FFR was negatively affected by the presence of bifurcation lesions. CLINICALTRIAL https://clinicaltrials.gov; Unique identifier: NCT03692936.
Impact of coronary plaque morphology on the precision of computational fractional flow reserve derived from optical coherence tomography imaging.

J. Westra,Lianglong Chen,H. Emori,Jiayue Huang,T. Kubo,S. Tu,E. Holck,Xiaoling Zeng,Fukang Hu,W. Wijns

DOI: https://doi.org/10.21037/cdt-21-505

2021-01-01

Cardiovascular Diagnosis and Therapy

Abstract:Background Computational fractional flow reserve (FFR) was recently developed to expand the use of physiology-guided percutaneous coronary intervention (PCI). Nevertheless, current methods do not account for plaque composition. It remains unknown whether the numerical precision of computational FFR is impacted by the plaque composition in the interrogated vessels. Methods This study is an observational, retrospective, cross-sectional study. Patients who underwent both optical coherence tomography (OCT) and FFR prior to intervention between August 2011 and October 2018 at Wakayama Medical University Hospital were included. All frames from OCT pullbacks were analyzed using a deep learning algorithm to obtain coronary plaque morphology including thin-cap fibroatheroma (TCFA), lipidic plaque volume (LPV), fibrous plaque volume (FPV), and calcific plaque volume (CPV). The interrogated vessels were stratified into three subgroups: the overestimation group with the numerical difference between the optical flow ratio (OFR) and FFR >0.05, the reference group with the difference ≥-0.05 and ≤0.05, and the underestimation group with the difference <-0.05. Results In total 230 vessels with intermediate coronary artery stenosis from 193 patients were analyzed. The mean FFR was 0.82±0.10. Among them, 21, 179, and 30 vessels were in the overestimation, the reference, and the underestimation group, respectively. TCFA was higher in the underestimation group (60%) compared with reference (36.3%) and overestimation group (19%). Besides, it was not associated with numerical difference between OFR and FFR (NDOF) after multilevel linear regression. LPV was associated with NDOF as OFR underestimated FFR with -0.028 [95% confidence interval (CI): -0.047, -0.009] for every 100 mm3 increase in LPV. Conclusions High lipid burden underestimates FFR when OFR is used to assess the hemodynamic importance of intermediate coronary artery stenosis. TCFA, FPV, and CPV were not independent predictors of NDOF.

Engineering,Medicine
Optical coherence tomography-based patient-specific coronary artery reconstruction and fluid–structure interaction simulation

Jiaqiu Wang,Phani Kumari Paritala,Jessica Benitez Mendieta,Yo Komori,Owen Christopher Raffel,Yuantong Gu,Zhiyong Li

DOI: https://doi.org/10.1007/s10237-019-01191-9

IF: 3.5

2019-07-10

Biomechanics and Modeling in Mechanobiology

Abstract:Plaque rupture is related to the mechanical stress it suffered. The value and distribution of the mechanical stress in plaque could help on assessing plaque vulnerability. To look into the stress conditions in the coronary artery, a patient-specific coronary model was created by using optical coherence tomography (OCT) and angiography imaging data. The reconstructed coronary model consisted of the structure of the lumen, the arterial wall and plaque components. Benefited by the high resolution of OCT, detailed structures such as the thin fibrous cap could be observed and built into the geometry. On this reconstructed coronary model, a fully coupled fluid–structure interaction (FSI) simulation was performed. The principle stress in coronary plaque and the wall shear stress (WSS) were analyzed. The FSI simulation results show that the cap thickness had a significant effect on the stress, and the principle stress at the thin cap area was more than double of those at the locations with a larger thickness. WSS is thought as an important parameter to assess the potentially dangerous areas of the atherosclerosis-prone (caused by low WSS) and the plaque rupture (high WSS). From the WSS plots of our FSI model, the area with abnormal WSS value was detected around the position where a lipid core existed. The FSI simulation results were compared with the results from the conventional structure-only and the computational fluid dynamics (CFD)-only computational models to quantify the difference between the three models. We found little difference in the principle stress results between the FSI and the structure-only model, but a significant difference between the FSI and the CFD-only model when looking into the WSS. The WSS values at the two observation spots from the CFD-only model were higher than the values from the FSI model by 17.95% and 22.66% in average, respectively. Furthermore, the FSI model detected more areas of low WSS, because the fluid domain could expand circumferentially when pressure loaded on the flexible arterial. This study suggests that OCT-based FSI model may be useful for plaque vulnerability assessment and it may be critical to perform the FSI simulation if an accurate WSS value is required.

engineering, biomedical,biophysics
Association of Coronary Inflammation with Plaque Vulnerability and Fractional Flow Reserve in Coronary Artery Disease

You-Jung Choi,Seokhun Yang,Henry West,Pete Tomlins,Masahiro Hoshino,Tadashi Murai,Doyeon Hwang,Eun-Seok Shin,Joon-Hyung Doh,Chang-Wook Nam,Jianan Wang,Hitoshi Matsuo,Tsunekazu Kakuta,Charalambos Antoniades,Bon-Kwon Koo

DOI: https://doi.org/10.1016/j.jcct.2024.10.013

IF: 5.17

2024-01-01

Journal of Cardiovascular Computed Tomography

Abstract:BACKGROUND:The fat attenuation index (FAI) measured using coronary computed tomography angiography (CCTA) enables the direct evaluation of pericoronary adipose tissue composition and vascular inflammation. We aimed to investigate the association of fractional flow reserve (FFR) and plaque vulnerability with coronary inflammation. METHODS:Patients with suspected coronary artery disease (CAD) who underwent CCTA and invasive FFR measurements within 90-day were included. A cloud-based medical device, CaRi-Heart, serves as a surrogate tool for evaluating coronary inflammation based on FAI by analyzing CCTA images. The correlations between CCTA-defined plaque characteristics, invasive coronary angiographic and physiologic assessments, and CaRi-Heart risk were analyzed. The primary endpoint was the patient-oriented composite outcome (POCO) consisting of all-cause death, any myocardial infarction, and any revascularization. RESULTS:A total of 564 patients (median age 67.0 years; 75.4 % men) were included. There were no significant differences in quantitative and qualitative plaque characteristics or FFR between the high- and low-CaRi-Heart risk groups (i.e., ≥5 % and <5 %). During the median follow-up of 3.2 years [1.13-4.73 years], CaRi-Heart risk ≥5 % was associated with a significantly higher rate of POCO compared to CaRi-Heart risk <5 % (0.9 % vs. 10.1 %, P = 0.037). The CaRi-Heart risk was an independent predictor of POCO as a continuous (adjusted HR 1.016, 95 % CI 1.005-0.027, P = 0.004) and categorical variable (CaRi-Heart risk ≥5 %, adjusted HR 2.949, 95 % CI 1.182-7.360, P = 0.021), regardless of high-risk plaque characteristics and FFR. CONCLUSION:Coronary inflammation risk assessed using CaRi-Heart risk provides independent prognostic information regardless of plaque vulnerability and physiologic stenosis in patients with CAD.
Prognostic Implications of Plaque Characteristics and Stenosis Severity in Patients with Coronary Artery Disease.

Joo Myung Lee,Ki Hong Choi,Bon-Kwon Koo,Jonghanne Park,Jihoon Kim,Doyeon Hwang,Tae-Min Rhee,Hyung Yoon Kim,Hae Won Jung,Kyung-Jin Kim,Kawase Yoshiaki,Eun-Seok Shin,Joon-Hyung Doh,Hyuk-Jae Chang,Yun-Kyeong Cho,Hyuck-Jun Yoon,Chang-Wook Nam,Seung-Ho Hur,Jianan Wang,Shaoliang Chen,Shoichi Kuramitsu,Nobuhiro Tanaka,Hitoshi Matsuo,Takashi Akasaka

DOI: https://doi.org/10.1016/j.jacc.2019.02.060

IF: 24

2019-01-01

Journal of the American College of Cardiology

Abstract:BACKGROUND:Although the presence of ischemia is a key prognostic factor in patients with coronary artery disease, the presence of high-risk plaque characteristics (HRPC) is also associated with increased risk of cardiovascular events. Limited data exist regarding the prognostic implications of combined information on physiological stenosis severity assessed by fractional flow reserve (FFR) and plaque vulnerability by coronary computed tomography angiography (CTA)-defined HRPC. OBJECTIVES:The current study aimed to evaluate the: 1) association between physiological stenosis severity and coronary CTA-defined HRPC; and 2) prognostic implications of coronary CTA-defined HRPC according to physiological stenosis severity in patients with coronary artery disease. METHODS:A total of 772 vessels (299 patients) evaluated by both coronary CTA and FFR were analyzed. The presence and number of HRPC (minimum lumen area <4 mm2, plaque burden ≥70%, low attenuating plaque, positive remodeling, napkin-ring sign, or spotty calcification) were assessed using coronary CTA images. The risk of vessel-oriented composite outcome (VOCO) (a composite of vessel-related ischemia-driven revascularization, vessel-related myocardial infarction, or cardiac death) at 5 years was compared according to the number of HRPC and FFR categories. RESULTS:The proportion of lesions with ≥3 HRPC was significantly decreased according to the increase in FFR values (58.6%, 46.5%, 36.8%, 15.7%, and 3.5% for FFR ≤0.60, 0.61 to ≤0.70, 0.71 to ≤0.80, 0.81 to ≤0.90, and >0.90, respectively; overall p value <0.001). Both FFR and number of HRPC showed significant association with the estimated risk of VOCO (p = 0.008 and p = 0.023, respectively). In the FFR >0.80 group, lesions with ≥3 HRPC showed significantly higher risk of VOCO than those with <3 HRPC (15.0% vs. 4.3%; hazard ratio: 3.964; 95% confidence interval: 1.451 to 10.828; p = 0.007). However, there was no significant difference in the risk of VOCO according to HRPC in the FFR ≤0.80 group. By multivariable analysis, the presence of ≥3 HRPC was independently associated with the risk of VOCO in the FFR >0.80 group. CONCLUSIONS:Physiological stenosis severity and the number of HRPC were closely related, and both components had significant association with the risk of clinical events. However, the prognostic implication of HRPC was different according to FFR. Integration of both physiological stenosis severity and plaque vulnerability would provide better prognostic stratification of patients than either individual component alone, especially in patients with FFR >0.80. (Clinical Implication of 3-vessel Fractional Flow Reserve [3V FFR-FRIENDS study]; NCT01621438).
Ten year celebration--a decade of progress for Physical Therapy in Sport.

Z. Hudson

DOI: https://doi.org/10.1016/j.ptsp.2009.12.001

IF: 2.92

2010-02-01

Physical Therapy in Sport

Abstract:
Diagnostic Performance of Computational Fluid Dynamics (Cfd)-Based Fractional Flow Reserve (FFR) Derived from Coronary Computed Tomographic Angiography (CCTA) for Assessing Functional Severity of Coronary Lesions

Jun Jiang,Changqing Du,Yumeng Hu,Hong Yuan,Jianhua Wang,Yibin Pan,Lifang Bao,Liang Dong,Changling Li,Yong Sun,Xiaochang Leng,Jianping Xiang,Lijiang Tang,Jian'an Wang

DOI: https://doi.org/10.21037/qims-22-521

2023-01-01

Quantitative Imaging in Medicine and Surgery

Abstract:Background:Fractional flow reserve (FFR) is the gatekeeper for lesion-specific revascularization decision-making in patients with stable coronary artery disease (CAD). The potential of noninvasive calculation of FFR from coronary computed tomographic angiography (CCTA) to identify ischemia-causing lesions has not been sufficiently assessed. The objective of this study was to evaluate the feasibility and diagnostic accuracy of a novel computational fluid dynamics (CFD)-based technology, termed as AccuFFRct, for the diagnosis of functionally significant lesions from CCTA, using wire-based FFR as a reference standard.Methods:A total of 191 consecutive patients who underwent CCTA and FFR measurement for suspected or known CAD were retrospectively enrolled at 2 medical centers. Three-dimensional anatomic model of coronary tree was extracted from CCTA data, CFD was applied subsequently with a novel strategy for the computation of FFR in a blinded fashion by professionals. Results were compared to invasive FFR, a threshold of ≤0.80 was used to indicate the hemodynamically relevant stenosis.Results:On a per-patient basis, the overall accuracy, sensitivity, specificity of AccuFFRct for detecting ischemia were 91.78% (95% CI: 86.08% to 95.68%), 92.31% (95% CI: 81.46% to 97.86%) and 91.49% (95% CI: 83.92% to 96.25%), respectively; those for per-vessel basis were 91.05% (95% CI: 86.06% to 94.70%), 92.73% (95% CI: 82.41% to 97.98%) and 90.37% (95% CI: 84.10% to 94.77%), respectively. The AccuFFRct and FFR was well correlated on per-patient (r=0.709, P<0.001) and per-vessel basis (r=0.655, P<0.001). The AUC of AccuFFRct determination was 0.935 (95% CI: 0.881 to 0.969) and 0.927 (95% CI: 0.880 to 0.960) on per-patient and per-vessel basis.Conclusions:This novel CFD-based CCTA-derived FFR shows good diagnostic performance for detecting hemodynamic significance of coronary stenoses and may potentially become a new gatekeeper for invasive coronary angiography (ICA).
The Role of Fluid Mechanics in Coronary Atherosclerotic Plaques: An Up-to-Date Review

Yaoming Yang,Yang Song,Xiaolin Mu

DOI: https://doi.org/10.31083/j.rcm2502049

2024-01-29

Reviews in Cardiovascular Medicine

Abstract:Most acute coronary syndromes are due to a sudden luminal embolism caused by the rupturing or erosion of atherosclerotic plaques. Prevention and treatment of plaque development have become an effective strategy to reduce mortality and morbidity from coronary heart disease. It is now generally accepted that plaques with thin-cap fibroatheroma (TCFA) are precursors to rupturing and that larger plaques and high-risk plaque features (including low-attenuation plaque, positive remodeling, napkin-ring sign, and spotty calcification) constitute unstable plaque morphologies. However, plaque vulnerability or rupturing is a complex evolutionary process caused by a combination of multiple factors. Using a combination of medicine, engineering mechanics, and computer software, researchers have turned their attention to computational fluid mechanics. The importance of fluid mechanics in pathological states for promoting plaque progression, inducing plaque tendency to vulnerability, or even rupture, as well as the high value of functional evaluation of myocardial ischemia has become a new area of research. This article reviews recent research advances in coronary plaque fluid mechanics, aiming to describe the concept, research implications, current status of clinical studies, and limitations of fluid mechanic’s characteristic parameters: wall shear stress (WSS), axial plaque shear (APS), and fractional flow reserve (FFR). Previously, most computational fluid dynamics were obtained using invasive methods, such as intravascular ultrasound (IVUS) or optical coherence tomography (OCT). In recent years, the image quality and spatial resolution of coronary computed tomography angiography (CCTA) have greatly improved, making it possible to compute fluid dynamics by noninvasive methods. In the future, the combination of CCTA-based anatomical stenosis, plaque high-risk features, and fluid mechanics can further improve the prediction of plaque development, vulnerability, and risk of rupturing, as well as enabling noninvasive means to assess the degree of myocardial ischemia, thereby providing an important aid to guide clinical decision-making and optimize treatment.

cardiac & cardiovascular systems
Analysis of the perivascular fat attenuation index and quantitative plaque parameters in relation to haemodynamically impaired myocardial ischaemia

Yangfei Long,Rui Guo,Keyu Jin,JiaJia An,Penggang Fu,Jian Lei,Jing Ma

DOI: https://doi.org/10.1007/s10554-024-03122-x

2024-05-19

The International Journal of Cardiovascular Imaging

Abstract:To investigate the correlation between quantitative plaque parameters, the perivascular fat attenuation index, and myocardial ischaemia caused by haemodynamic impairment. Patients with stable angina who had invasive flow reserve fraction (FFR) assessment and coronary artery computed tomography (CT) angiography were retrospectively enrolled. A total of 138 patients were included in this study, which were categorized into the FFR 0.8 group (n = 58), depending on the range of FFR values. The perivascular FAI and CTA-derived parameters, including plaque length (PL), total plaque volume (TPV), minimum lumen area (MLA), and narrowest degree (ND), were recorded for the lesions. An FFR < 0.75 was defined as myocardial-specific ischaemia. The relationships between myocardial ischaemia and parameters such as the PL, TPV, MLA, ND, and FAI were analysed using a logistic regression model and receiver operating characteristic (ROC) curves to compare the diagnostic accuracy of various indicators for myocardial ischaemia. The PL, TPV, ND, and FAI were greater in the FFR 0.80 group (all p < 0.05). The MLA in the FFR 0.80 group (both P 0.80 group, but there was a significant difference in the FAI. The coronary artery lesions with FFRs ≤ 0.75 had the greatest FAI values. Multivariate analysis revealed that the perivascular FAI and PL density are significant predictors of myocardial ischaemia. The FAI has some predictive value for myocardial ischaemia (AUC = 0.781). After building a combination model using the FAI and plaque length, the predictive power increased (AUC, 0.781 vs. 0.918), and the change was statistically significant (P < 0.001). The combined model of PL + FAI demonstrated great diagnostic efficacy in identifying myocardial ischaemia caused by haemodynamic impairment; the lower the FFR was, the greater the FAI. Thus, the PL + FAI could be a combined measure to securely rule out myocardial ischaemia.

radiology, nuclear medicine & medical imaging,cardiac & cardiovascular systems
Influence of coronary plaque characteristics on lesion-specific ischemia assessed by coronary computed tomography angiography and fractional flow reserve - a systematic review and meta-analysis

N Iraqi,B L Noergaard,D Dey,J Abdulla

DOI: https://doi.org/10.1093/eurheartj/ehae666.174

IF: 39.3

2024-10-30

European Heart Journal

Abstract:Background Characterization of atherosclerotic plaque features by coronary computed tomography angiography (CCTA) carries profound prognostic value. Previous studies indicate that coronary plaque burden and certain plaque features are associated to lesion-specific ischemia by invasive fractional flow reserve (FFR). However, the existing literature is limited by small sample sizes, and provide inconsistent results. Purpose We performed a meta-analysis in order to delineate further the potential association between coronary plaque phenotype by CCTA and FFR. Methods A comprehensive systematic literature review and meta-analysis was conducted. PubMed and Embase databases were searched for studies that investigated the association between coronary plaque characteristics and FFR between January 2010 and August 2023. Study search, evaluation, and data extraction were performed independently by two researchers. Weighted mean difference (WMD) method for WMD was used for comparison of pooled per-lesion plaque parameters and presence of specific plaque features against presence of lesion-specific ischemia (FFR ≤0.80). Lesions with stenosis severity of 25-90% were included. Extracted data from eligible studies were analysed using random effects model for WMD and to estimate odds ratios (OR) with 95% confidence intervals (CI). Results A total of 12 studies were deemed eligible with 1,318 patients and available data on 1,915 coronary lesions. Of these, 626 lesions caused ischemia. Significantly greater total plaque volume (TPV) and non-calcified plaque volume (NCPV) occurred in lesions with abnormal FFR compared to normal FFR (WMD 83.0 mm3, 95% CI: 44.27; 121.81, p<0.001; WMD 83.63 mm3, 95% CI: 55.0; 112.24, p <0.001, respectively). Similar findings were observed for aggregate plaque volume (%APV) and plaque burden (%PB) with WMD 9.18, 95% CI: 6.08; 12.28, p 0.80 (OR 4.25, 95% CI: 1.39; 13.00, p=0.011; OR 1.92, 95% CI: 1.33; 2.75, p=0.001, respectively). A summary of the meta-analysis findings regarding the association between plaque burden and plaque characteristics and FFR is provided in Figure 1 and 2. Conclusion CCTA-derived TPV and NCPV as well as %APV, %PB and the presence of napkin-ring sign and spotty calcification are associated with presence of lesion-specific ischemia. Coronary plaque assessment from CCTA images provide improved discrimination of lesion-specific ischaemia.

cardiac & cardiovascular systems
Multi-patient study for coronary vulnerable plaque model comparisons: 2D/3D and fluid–structure interaction simulations

Qingyu Wang,Dalin Tang,Liang Wang,Akiko Meahara,David Molony,Habib Samady,Jie Zheng,Gary S. Mintz,Gregg W. Stone,Don P. Giddens

DOI: https://doi.org/10.1007/s10237-021-01450-8

IF: 3.5

2021-03-23

Biomechanics and Modeling in Mechanobiology

Abstract:Abstract Several image-based computational models have been used to perform mechanical analysis for atherosclerotic plaque progression and vulnerability investigations. However, differences of computational predictions from those models have not been quantified at multi-patient level. In vivo intravascular ultrasound (IVUS) coronary plaque data were acquired from seven patients. Seven 2D/3D models with/without circumferential shrink, cyclic bending and fluid–structure interactions (FSI) were constructed for the seven patients to perform model comparisons and quantify impact of 2D simplification, circumferential shrink, FSI and cyclic bending plaque wall stress/strain (PWS/PWSn) and flow shear stress (FSS) calculations. PWS/PWSn and FSS averages from seven patients (388 slices for 2D and 3D thin-layer models) were used for comparison. Compared to 2D models with shrink process, 2D models without shrink process overestimated PWS by 17.26%. PWS change at location with greatest curvature change from 3D FSI models with/without cyclic bending varied from 15.07% to 49.52% for the seven patients (average = 30.13%). Mean Max-FSS, Min-FSS and Ave-FSS from the flow-only models under maximum pressure condition were 4.02%, 11.29% and 5.45% higher than those from full FSI models with cycle bending, respectively. Mean PWS and PWSn differences between FSI and structure-only models were only 4.38% and 1.78%. Model differences had noticeable patient variations. FSI and flow-only model differences were greater for minimum FSS predictions, notable since low FSS is known to be related to plaque progression. Structure-only models could provide PWS/PWSn calculations as good approximations to FSI models for simplicity and time savings in calculation.

engineering, biomedical,biophysics
Differences in Plaque Characteristics and Myocardial Mass

Chee Hae Kim,Seokhun Yang,Jinlong Zhang,Joo Myung Lee,Masahiro Hoshino,Tadashi Murai,Doyeon Hwang,Eun‐Seok Shin,Joon‐Hyung Doh,Chang‐Wook Nam,Jianan Wang,Shao‐Liang Chen,Nobuhiro Tanaka,Hitoshi Matsuo,Takashi Akasaka,Tsunekazu Kakuta,Bon−Kwon Koo

DOI: https://doi.org/10.1016/j.jacasi.2021.11.011

2022-01-01

Abstract:The mechanism of the fractional flow reserve (FFR) difference according to sex has not been clearly understood. This study sought to evaluate sex differences in coronary stenosis, plaque characteristics, and left ventricular (LV) mass and their implications for physiological significance. This was a post hoc analysis of a pooled population of multicenter, international prospective cohorts. Patients (166 women and 489 men) underwent coronary computed tomography angiography (CCTA) within 90 days before invasive FFR measurements were included. The minimal lumen area, percent of plaque burden, whole vessel plaque volume by composition, high-risk plaque characteristics, and LV mass were analyzed from CCTA images. Among 1,188 vessels analyzed, the FFR value was higher in women than that in men (0.85 ± 0.13 vs 0.82 ± 0.14; P = 0.001) despite a similar percentage of diameter stenosis between the sexes (45.9% ± 18.9% vs 46.1% ± 17.7%; P = 0.920). The composition of fibrofatty plaque + necrotic core (13.1% ± 16.9% vs 21.2% ± 19.9%; P < 0.001) and frequencies of low attenuation plaque (12.7% vs 24.5%; P < 0.001) and positive remodeling (33.8% vs 45.5%; P = 0.001) were lower in women than in men. Vessel, plaque, and lumen volumes were significantly smaller in women than that in men (all P < 0.001); however, no sex difference was observed in any of these parameters after adjustment for LV mass (all P > 0.10). Sex was not an independent predictor of the FFR value after adjustment for stenosis severity, plaque characteristics, and LV mass. Higher FFR values for the same stenosis severity in women can be explained by fewer high-risk plaque characteristics and smaller myocardial mass in women than that in men. (CCTA-FFR Registry for Risk Prediction; NCT04037163)
[Association of Coronary Perivascular Fat Attenuation Index, the Parameters of Plaque and Fractional Flow Reserve].

J H Li,C X Tang,T Y Liu,Y C Chen,C S Zhou,G M Lu,J Y Zhang,L J Zhang,Guifen Yang

DOI: https://doi.org/10.3760/cma.j.cn112137-20210414-00889

2021-01-01

Abstract:Objective: To explore the association of coronary perivascular fat attenuation index (FAI), the parameters of plaque and fractional flow reserve (FFR). Methods: A total of 113 patients (with 141 plaques) (78 males and 35 females, age from 40 to 83 years) with stable coronary artery disease were retrospectively collected from Jingling Hospital and Shanghai Sixth People's Hospital. All the patients underwent coronary CT angiography and invasive FFR examinations. The quantitative and qualitative parameters of plaque and vessel (such as the length and volume of plaque, the characteristics of plaque and high-risk plaque) and the FAI around the plaque were measured. The patients were divided into positive FAI group (n=46) and negative FAI group (n=66) according to the standard of whether the threshold of FAI≥ -70 HU. The quantitative indexes, including age, the length and volume of plaque, minimal lumen area (MLA) and FAI, as well as the qualitative indexed, including the characteristics of plaque, the number and characteristic of high-risk plaque and the number of patients and plaque with positive FFR were compared between the two groups. Further, logistic regression analysis was performed to analyze the correlation among myocardial ischemia, age, the length of plaque, minimal lumen area (MLA), FAI and so on. ROC curve was used for evaluating the performance of each parameter. Results: Compared to the negative FAI group, positive FAI group had lower MLA (2.00±1.33 mm2 vs 4.13±2.41 mm2, P<0.001). The proportion of patients and vessels with FFR<0.75 in positive FAI group were significantly higher than that in negative FAI group (21.3% vs 4.5%, P=0.006; 23.2% vs 8.2%, P=0.016). The FAI between high-risk plaque and non-high-risk plaque had no significant difference (21.2% vs 16.1%, P=0.451). FAI predicted myocardial ischemia (AUC=0.666, P=0.021) and significantly improved the prediction efficiency of complex model(0.915 vs 0.951,P=0.033). Conclusion: Lower MLA and higher incidence of myocardial ischemia were associated with patients with higher FAI. In addition, FAI has a certain prediction efficiency and can provide incremental value for the determination of myocardial ischemia.
Accurate Calculation of FFR Based on a Physics-Driven Fluid‐Structure Interaction Model

Xiaolu Xi,Jincheng Liu,Hao Sun,Ke Xu,Xue Wang,Liyuan Zhang,Tianming Du,Jian Liu,Bao Li

DOI: https://doi.org/10.3389/fphys.2022.861446

IF: 4

2022-01-01

Frontiers in Physiology

Abstract:Background: The conventional FFRct numerical calculation method uses a model with a multi-scale geometry based upon CFD, and rigid walls. Therefore, important interactions between the elastic vessel wall and blood flow are not routinely considered. Changes in the resistance of coronary microcirculation during hyperaemia are likewise not typically incorporated using a fluid-structure interaction (FSI) algorithm. It is likely that both have resulted in FFRct calculation errors.Objective: In this study we incorporated both the influence of vascular elasticity and coronary microcirculatory structure on FFR, to improve the accuracy of FFRct calculation. Thus, in this study, a physics-driven 3D-0D coupled model including fluid-structure interaction was established to calculate accurate FFRct values.Methods: Based upon a novel geometric multi-scale modeling technology, a FSI simulation approach was used. A lumped parameter model (0D) was used as the outlet boundary condition for the 3D FSI coronary artery model to incorporate physiological microcirculation, with bidirectional coupling between the two models.Results: The accuracy, sensitivity, specificity, and both positive and negative predictive values of FFRDC calculated based upon the coupled 3D-0D model were 86.7, 66.7, 84.6, 66.7, and 91.7%, respectively. Compared to the calculated value using the basic CFD model (MSE = 5.9%, accuracy rate = 80%), the FFRCFD calculated based on the coupled 3D-0D model has a smaller MSE of 1.9%.Conclusion: The physics-driven coupled 3D-0D model that incorporates fluid-structure interactions not only consider the influence of the elastic vessel wall on blood flow, but also provides reliable microvascular resistance boundary conditions for the 3D FSI model. This allows for a calculation that is based upon conditions that are closer to the physiological environment, and thus improves the accuracy of FFRct calculation. It is likely that more accurate information will provide an enhanced recommendation regarding percutaneous coronary intervention (PCI) in the clinic.
[Nutrition in the etiology of breast cancer--results of a survey in Austria--Part II].

F. Beaufort

1985-11-01

Abstract:
CT-FFR vs a model of combined plaque characteristics for identifying ischemia: Results from CT-FFR CHINA trial

Na Zhao,Yang Gao,Bo Xu,Tao Jiang,Li Xu,Hongjie Hu,Lin Li,Wenqiang Chen,Dumin Li,Feng Zhang,Lijuan Fan,Bin Lu

DOI: https://doi.org/10.1016/j.ejrad.2021.109634

IF: 4.531

2021-05-01

European Journal of Radiology

Abstract:<h3 class="u-h4 u-margin-m-top u-margin-xs-bottom">Objectives</h3><p>To evaluate the diagnostic performance of fractional flow reserve (FFR) derived from coronary computed tomography angiography (CCTA; CT-FFR) and combined plaque characteristics for ischemia in different CCTA stenosis levels.</p><h3 class="u-h4 u-margin-m-top u-margin-xs-bottom">Methods</h3><p>This clinical trial analyzed 317 patients with 30%–90% coronary stenosis in 366 vessels from 5 centers undergoing CCTA and invasive FFR. 366 vessels were assigned into < 50% (nonobstructive) and ≥ 50% (obstructive) stenosis groups. Lesion length (LL), plaque burden (PB), diameter stenosis (DS), volume ratio of plaque subcomponents < 30 HU (VR < 30HU), and high-risk features were analyzed. Logistic regression models were used to identify plaque characteristic predictors for lesion-specific ischemia in different stenosis grades. The area under receiver operating characteristics curve (AUC) of integrated plaque characteristics and CT-FFR were calculated and compared.</p><h3 class="u-h4 u-margin-m-top u-margin-xs-bottom">Results</h3><p>In < 50% stenosis lesions, PB (OR: 1.296, <em>p</em> = 0.002), LL (OR:1.075, <em>p</em> = 0.020), and DS (OR:1.085, <em>p</em> = 0.031) were independent predictors of ischemia. In ≥ 50% stenosis lesions, VR < 30HU (OR:1.031, <em>p</em> = 0.005) and DS (OR: 1.020, <em>p</em> = 0.044) were independent predictors for ischemia. AUC of plaque characteristic (VR < 30HU plus DS) for ischemia was 0.67 (95% CI: 0.61–0.72) in ≥ 50% stenosis level, which was significantly lower than CT-FFR (AUC=0.90; 95% CI: 0.86–0.93) (<em>p</em> < 0.001). For lesions causing <50% stenosis, AUC of combined plaque model (VR < 30HU plus DS) was 0.88 (95% CI: 0.80–0.95), equivalent to AUC of CT-FFR (AUC = 0.88; 95% CI: 0.80–0.96; <em>p</em> = 0.957).</p><h3 class="u-h4 u-margin-m-top u-margin-xs-bottom">Conclusion</h3><p>CT-FFR is a powerful functional assessment tool for both obstructive and nonobstructive diseases. However, for nonobstructive CAD confirmed by CCTA, a model of a combination of plaque characteristics could be a valuable alternative to CT-FFR.</p>

radiology, nuclear medicine & medical imaging
Fluid-structure interaction study of hemodynamics and its biomechanical influence on carotid artery atherosclerotic plaque deposits

Ayodele James Oyejide,Adetokunbo Andrew Awonusi,Ebenezer Olubunmi Ige

DOI: https://doi.org/10.1016/j.medengphy.2023.103998

Abstract:Atherosclerotic plaque deposits are common causes of blood flow disruption in the carotid artery bifurcation and the associated fluid mechanics has been extensively studied using Computational Fluid Dynamics (CFD) and Fluid Structure Interaction (FSI). However, the elastic responses of plaques to hemodynamics in the carotid artery bifurcation has not been deeply studied using either of the above-mentioned numerical techniques. In this study, a two-way FSI study was coupled with CFD technique, using Arbitrary-Lagrangian-Eulerian method, to study the biomechanics of blood flow on nonlinear and hyperelastic calcified plaque deposits in a realistic geometry of the carotid sinus. FSI parameters such as total mesh displacement and von Misses stress on the plaque, as well as flow velocity and blood pressure around the plaques, were analyzed and compared to variables such as velocity streamline, pressure and wall shear stress obtained from CFD simulation in a healthy model. The blood flow simulations reveal complete reversed blood flow behavior in the internal carotid artery, ICAs and external carotid artery, ECAs for both cases. In particular, this study suggests that plaques, irrespective of the masses, possess a high yielding response to hemodynamic forces at the attaching edges, while the surfaces are vulnerable to rupture.
Pericoronary fat attenuation index and coronary plaque quantified from coronary computed tomography angiography identify ischemia-causing lesions

Hankun Yan,Na Zhao,Wenlei Geng,Zhihui Hou,Yang Gao,Bin Lu

DOI: https://doi.org/10.1016/j.ijcard.2022.03.033

IF: 4.039

2022-06-01

International Journal of Cardiology

Abstract:BackgroundThe association between pericoronary fat attenuation index (FAI), plaque characteristics, and lesion-specific ischemia identified by FFR remains unclear.MethodsCoronary computed tomography angiography (CCTA) stenosis, FAI, plaque characteristics, fractional flow reserve derived from computed tomography (FFRCT) and FFR were assessed in 280 vessels of 247 patients. Stenosis ≥50% was considered obstructive. Optimal thresholds of FAI and plaque variables were defined by the area under the receiver-operating characteristics curve (AUC) analysis. Ischemia was defined by FFR ≤ 0.80.ResultsFAI ≥ −71.9 HU, low-attenuation plaque (LAP) ≥ 49.62 mm3 and aggregate plaque volume (APV) ≥ 28.91% predicted ischemia independent of other plaque characteristics. The addition of FAI ≥ −71.9 HU improved discrimination (AUC, 0.720 vs. 0.674, P = 0.035) and reclassification abilities (category-free net reclassification index [NRI], 0.470, P < 0.001; relative integrated discrimination improvement [IDI], 0.047, P < 0.001) of ischemia compared with stenosis evaluation alone, with further discrimination (AUC, 0.772 vs. 0.720, P = 0.028) and reclassification abilities (NRI, 0.385; P = 0.001; relative IDI, 0.077; P < 0.001) of ischemia by adding information regarding LAP ≥49.62 mm3 + APV ≥ 28.91%. And the diagnostic performance of combination approach was comparable to that of FFRCT alone (AUC, 0.772 vs. 0.762, P = 0.771).ConclusionsStenosis severity, FAI, plaque characteristics predicted lesion-specific ischemia. The combination of FAI and plaque assessment improved the discrimination of ischemia compared with stenosis assessment alone.

cardiac & cardiovascular systems

Fluosilicathaltige Gemische für den Holzschutz mit herabgesetzter eisenschädigender Wirkung

Estimating Current and Long-Term Risks of Coronary Artery in Silico by Fractional Flow Reserve, Wall Shear Stress and Low-Density Lipoprotein Filtration Rate

Effect of Microcirculatory Resistance on Coronary Blood Flow and Instantaneous Wave-Free Ratio: A Computational Study.

Effect of lesion characteristics on diagnostic performance of CT-derived fractional flow reserve: exploring the indications for application based on CT-FFR CHINA trial (Preprint)

Impact of coronary plaque morphology on the precision of computational fractional flow reserve derived from optical coherence tomography imaging.

Optical coherence tomography-based patient-specific coronary artery reconstruction and fluid–structure interaction simulation

Association of Coronary Inflammation with Plaque Vulnerability and Fractional Flow Reserve in Coronary Artery Disease

Prognostic Implications of Plaque Characteristics and Stenosis Severity in Patients with Coronary Artery Disease.

Ten year celebration--a decade of progress for Physical Therapy in Sport.

Diagnostic Performance of Computational Fluid Dynamics (Cfd)-Based Fractional Flow Reserve (FFR) Derived from Coronary Computed Tomographic Angiography (CCTA) for Assessing Functional Severity of Coronary Lesions

The Role of Fluid Mechanics in Coronary Atherosclerotic Plaques: An Up-to-Date Review

Analysis of the perivascular fat attenuation index and quantitative plaque parameters in relation to haemodynamically impaired myocardial ischaemia

Influence of coronary plaque characteristics on lesion-specific ischemia assessed by coronary computed tomography angiography and fractional flow reserve - a systematic review and meta-analysis

Multi-patient study for coronary vulnerable plaque model comparisons: 2D/3D and fluid–structure interaction simulations

Differences in Plaque Characteristics and Myocardial Mass

[Association of Coronary Perivascular Fat Attenuation Index, the Parameters of Plaque and Fractional Flow Reserve].

Accurate Calculation of FFR Based on a Physics-Driven Fluid‐Structure Interaction Model

[Nutrition in the etiology of breast cancer--results of a survey in Austria--Part II].

CT-FFR vs a model of combined plaque characteristics for identifying ischemia: Results from CT-FFR CHINA trial

Fluid-structure interaction study of hemodynamics and its biomechanical influence on carotid artery atherosclerotic plaque deposits

Pericoronary fat attenuation index and coronary plaque quantified from coronary computed tomography angiography identify ischemia-causing lesions