Natural microfibrils/regenerated cellulose-based carbon aerogel for highly efficient oil/water separation
Xiang Ma,Shuang Zhou,Junting Li,Fei Xie,Hui Yang,Cheng Wang,Wenjiang Li,Bradley D. Fahlman
DOI: https://doi.org/10.1016/j.jhazmat.2023.131397
IF: 13.6
2023-04-26
Journal of Hazardous Materials
Abstract:Cellulose-based carbon aerogels as biodegradable and renewable biomass materials have presented potential applications in oil/water separation. Herein, a novel carbon aerogel composed of natural microfibrils/regenerated cellulose (NM/RCA) was directly prepared by economical hardwood pulp as raw material using a novel co-solvent composed of deep eutectic solvent (DES) and N-methyl morpholine-N-oxide monohydrate (NMMO·H 2 O). In addition, the morphology and structure of the filiform natural microfibers could be remained after carbonized at 400 °C, which resulted in a low density (8–10 mg cm −3 ), high specific surface area (768.89 m 2 g −1 ) and high sorption capability. In addition, the aerogel exhibited high compressibility, outstanding elasticity, excellent fatigue resistance, and recyclability (80.5% height recovery after repeating 100 cycles at the strain of 80%). Due to the morphology and composition of the carbonized microfiber surface, the superhydrophobic materials with a water contact angle of 151.5°, could sorb various oils and organic solvents with 65–133 times its own weight and maintain 91.9% sorption capacity after 25 cycles. In addition, the aerogels could achieve the continuous separation of carbon tetrachloride (CCl 4 ) from water with a high flux rate of 11,718.8 L m −2 h −1 . Therefore, our prepared NM/RCA aerogels are anticipated to have broad potential applications in oil purification and contaminant remediation.
environmental sciences,engineering, environmental