Abstract:A second-order delta-sigma modulator (DSM) is proposed for readout integrated circuits of sensor applications requiring a small area and low-power consumption. The proposed second-order CIFF DSM with the architecture of cascaded-of-integrator feedforward (CIFF) basically consists of two integrators, a 3-bit quantizer, data-weighted averaging (DWA) circuit, and clock generator. The use of the 3-bit quantizer instead of the single-bit quantizer reduces the size of the feedback capacitor in the first integrator. The 3-bit quantizer is designed based on a successive approximation register analog-to-digital converter for small area and low power implementation. Furthermore, the proposed second-order CIFF DSM has a single supply without an additional reference driver while having a wide analog input voltage range with rail to rail. The proposed second-order CIFF DSM, implemented using a 130 nm 1-poly 6-metal CMOS process with a supply of 1.5 V, has an area of 0.096 mm2. It has a sampling frequency of 500 kHz for the implementation of an input bandwidth of 2 kHz and an oversampling ratio of 125. The measured peak signal-to-noise and distortion ratio is approximately 90 dB when the differential analog input signal has a frequency of 353 Hz and an amplitude of 1.2 Vpp. The measured dynamic range is approximately 96.3 dB.

A Low-Power Opamp-Less Second-Order Delta-Sigma Modulator for Bioelectrical Signals in 0.18 µm CMOS

A 153μw 26nv/√hz Readout Circuit with BW and Power Scalability Using Capacitively-Coupled Chopper Floating Inverter Amplifier Embedded in a Discrete-Time ΔΣ Modulator

A High-Performance,Low-Power ΣΔ Modulator for Digital Audio Applications

Low-power High-Linearity Sigma-Delta Modulator for Audio Applications

A 1V low power second-order delta-sigma modulator for biomedical signal application

A 65-Nm Low-Noise Low-Costς△modulator for Audio Applications

A 0.18 Μm High Resolution Bandpass Delta-Sigma Modulator for Acceleration Transducer Applications

A 10.7-Μa 103-Db DR Hybrid Delta-Sigma Modulator for Sensing Applications

A 0.18 μm Single-poly CMOS ∑-△ Modulator for Digital Audio Applications

A High Performance Delta-Sigma Modulator for Neurosensing

0.9 V 58 Μw 92 Db SNDR Audio ΔΣ Modulator with High Efficiency Low Noise Switched-Opamp and Novel DWA Technique

A 1.1V 12μw 86db DR Sigma-Delta Modulator for Health Monitoring System

A Low-power High-resolution Sigma-Delta Modulator

A Low Power Low Voltage 16 Bit Audio SigmaDelta Modulator.

Ultra low-FOM high-precision ΔΣ modulators with fully-clocked SO and zero static power quantizers

A 96 dB DR Second-Order CIFF Delta-Sigma Modulator with Rail-to-Rail Input Voltage Range

A Low Power Audio Delta-Sigma Modulator with Opamp-Shared and Opamp-Switched Techniques

A Low Power Low Voltage 16 Bit Audio &#x03a3;&#x0394; Modulator

A 20 Mu W 95db Dr Single-Bit Delta-Sigma Modulator for Portable Measurement Applications

A 0.6-V to 1-V Audio ΔΣ Modulator in 65 Nm CMOS with 90.2 Db SNDR at 0.6-V

A Low Power Sigma-Delta Modulator with Hybrid Architecture