Abstract:The full-scale static testing of wind turbine blades is an effective means to verify the accuracy and rationality of the blade design, and it is an indispensable part in the blade certification process. In the full-scale static experiments, the strain of the wind turbine blade is related to the applied loads, loading positions, stiffness, deflection, and other factors. At present, researches focus on the analysis of blade failure causes, blade load-bearing capacity, and parameter measurement methods in addition to the correlation analysis between the strain and the applied loads primarily. However, they neglect the loading positions and blade displacements. The correlation among the strain and applied loads, loading positions, displacements, etc. is nonlinear; besides that, the number of design variables is numerous, and thus the calculation and prediction of the blade strain are quite complicated and difficult using traditional numerical methods. Moreover, in full-scale static testing, the number of measuring points and strain gauges are limited, so the test data have insufficient significance to the calibration of the blade design. This paper has performed a study on the new strain prediction method by introducing intelligent algorithms. Back propagation neural network (BPNN) improved by Particle Swarm Optimization (PSO) has significant advantages in dealing with non-linear fitting and multi-input parameters. Models based on BPNN improved by PSO (PSO-BPNN) have better robustness and accuracy. Based on the advantages of the neural network in dealing with complex problems, a strain-predictive PSO-BPNN model for full-scale static experiment of a certain wind turbine blade was established. In addition, the strain values for the unmeasured points were predicted. The accuracy of the PSO-BPNN prediction model was verified by comparing with the BPNN model and the simulation test. Both the applicability and usability of strain-predictive neural network models were verified by comparing the prediction results with simulation outcomes. The comparison results show that PSO-BPNN can be utilized to predict the strain of unmeasured points of wind turbine blades during static testing, and this provides more data for characteristic structural parameters calculation.

Vibration modeling and simulation analysis of wind turbine flexible tower based on BP neural network

Vibration Anomaly Detection of Wind Turbine Based on Temporal Convolutional Network and Support Vector Data Description

Study on Dynamic Characteristics of the Ower-Foundation of 1.5 MW Wind Turbine

Analytical Solution for Natural Frequency of Monopile Supported Wind Turbine Towers

Vibration Forecasting Using BP Neural Network for Image Stabilization and an Improving Method

PSO-BP Neural Network-Based Strain Prediction of Wind Turbine Blades

SIMULATION OF FLUCTUATING WIND IN WIND FARM AND DYNAMIC RESPONSE OF WIND TURBINE TOWER

LSTM-NN Yaw Control of Wind Turbines Based on Upstream Wind Information

Natural Frequency Analysis of Wind Turbines Based on Flexible Multi-body Dynamics

Performance Prediction of the Elastic Support Structure of a Wind Turbine Based on Multi-Task Learning

Fault Detection of Wind Turbine Generator Bearing Using Attention-Based Neural Networks and Voting-Based Strategy

Fatigue Load Prediction of Large Wind Turbine by Big Data and Deep Learning

Combining CFD and artificial neural network techniques to predict vortex-induced vibration mechanism for wind turbine tower hoisting

Analysis of early fault vibration detection and analysis of offshore wind power transmission based on deep neural network

Research on Prediction of Tower Mechanical Response in Wind Field Based on Multi-Layer Perceptron

Physics guided wavelet convolutional neural network for wind-induced vibration modeling with application to structural dynamic reliability analysis

Application of back propagation neural network to fault diagnosis of direct-drive wind turbine

Short-Term Wind Power Prediction and Error Analysis

Estimation of rotor and main bearing loads using artificial neural networks

Fault Diagnosis of Wind Turbine Based on Convolution Neural Network Algorithm

A Fault Diagnosis Algorithm for Wind Turbine Blades Based on BP Neural Network