Abstract:The phenomena of gas hydrate plugging constitute a well known problem in the petroleum production and transport industries. Nevertheless, this issue is still not fully understood, especially for high water cut systems. For mature petroleum fields the amount of water produced increases, which results in increased risk of gas hydrate plug formation in pipelines. From previous work, it is not clear which mechanism is the most dominant for hydrate plug formation in water dominated pipeline systems: increased hydrate slurry viscosity or deposition on the pipeline wall. Knowledge of the mechanism leading to plugging is crucial to obtain efficient and economical risk management strategies for preventing pipeline plugging in such systems in the future. Computational fluid dynamics (CFD) with the discrete element method (DEM), which is an extension of the Lagrangian modelling methodology, was used to examine the flow of gas, hydrates and water in a pipeline. There is a lack of knowledge regarding interactions forces for naturally occurring gas hydrates in previous numerical works. These are key parameters when investigating hydrate agglomeration and deposition. The hydrate-hydrate cohesion force and the hydrate-wall adhesion force have been found from empirical estimates for model hydrates or regarded as unknown in earlier works. The first part of this thesis therefore focuses on finding better estimates for naturally occurring hydrate interaction from experimental findings. By numerical simulations, the corresponding work of cohesion between hydrate particles was found to be Wcoh = 7.0 mJ/m2 and the corresponding work of adhesion to the steel wall material was found to be Wadh = 0.8 mJ/m 2. Furthermore, two different two-dimensional flow systems for investigating the flow were simulated, the fist simulates a stirred tank system, referred to as case 1 and and the second a industrial pipe, referred to as case 2. In case 1, hydrates accumulated at the upper part of the pipe, close to the gas-water interphase, and agglomerates of a wide range of sizes were formed. In case 2, a major hydrate agglomerate was formed in the middle of the pipe. No particle deposition was observed in the simulations due to the shear force from the water phase being too high to allow the particles to adhere to the wall. According to these results, the most probable main mechanism for hydrate plugging in the water phase seems to be hydrate bed formation increasing the hydrate-water slurry viscosity.

Numerical simulation of hydrate slurry flow and deposit behavior based on openfoam-IATE

Numerical simulation study on multiphase flow pattern of hydrate slurry

Simulation of the Effect of Hydrate Adhesion Properties on Flow Safety in Solid Fluidization Exploitation

Simulation of the hydrate blockage process in a water-dominated system via the CFD-DEM method

Simulation of upward gas—hydrate slurry multiphase flow in a vertical concentric annulus for natural gas hydrate solid fluidization exploitation

Hydrate Slurry Flow Characteristics Influenced by Formation, Agglomeration and Deposition in a Fully Visual Flow Loop

Improved formation and evolution models for hydrate flow barriers in water-dominated systems based on flowloop experiments

Simulation study of natural gas hydrate slurry flow characteristics in a high-pressure flow loop

Identification and prediction of hydrate–slug flow to improve safety and efficiency of deepwater hydrocarbon transportation

Simulation research on solid fluidization exploitation of deepwater superficial layer natural gas hydrate reservoirs based on double-layer continuous pipe

Numerical Investigation of Natural Gas Hydrate Agglomeration and Deposition in High Water Cut Pipeline Systems

A Pressure Drop Prediction Model for Hydrate Slurry Based on Energy Dissipation under Laminar Flow Condition

Numerical Simulation of Swirl Flow Characteristics of CO2 Hydrate Slurry by Short Twisted Band

Evolution Process of Natural Gas Hydrate Deposits in Water-Dominated Systems

Dynamics of Hydrate Formation and Deposition under Pseudo Multiphase Flow

Comparative Study of OLGA and LedaFlow Models for Mechanistic Predictions of Hydrate Transport Dynamics

Numerical Simulations of Decomposition of Hydrate Particles in Flowing Water Considering the Coupling of Intrinsic Kinetics with Mass and Heat Transfer Rates

Simulation of Hydrate Migration and Deposition in Pipe with Diameter Reduction and Direction Variation

An improved model for predicting hydrate formation and deposition in horizontal annular flow

Numerical Simulation of the Flowing of Ice Slurry in Seawater Pipe of Polar Ships

Study on the Formation Characteristics of CO 2 Hydrate and the Rheological Properties of Slurry in a Flow System Containing Surfactants