Decolorization of textile wastewater by electrooxidation process using different anode materials: Statistical optimization
Nouha Bakaraki Turan,Hanife Sari Erkan,Fatih Ilhan,Guleda Onkal Engin
DOI: https://doi.org/10.1002/wer.1683
2022-01-01
Water Environment Research
Abstract:The presence of reactive dyes in textile wastewater is a serious environmental concern due to their associated mutagenic and carcinogenic effects. The present study aims to analyze the effect of different anodic materials on the decolorization of a real textile wastewater effluent. For this purpose, four different anodic materials-TiO<sub>2</sub> -coated platine, TiO<sub>2</sub> -coated ruthenium dioxide (RuO<sub>2</sub> ) (viz., RuO<sub>2</sub> ), titanium dioxide (TiO<sub>2</sub> ), and graphite-were connected, respectively, to titanium dioxide (TiO<sub>2</sub> ) used as a cathode electrode. Color and cost optimization studies were performed using the response surface methodology and the Box-Behnken experimental design (BBD). According to ANOVA results, the R<sup>2</sup> values for Pt/TiO<sub>2</sub> , RuO<sub>2</sub> /TiO<sub>2</sub> , TiO<sub>2</sub> /TiO<sub>2</sub> , and graphite/TiO<sub>2</sub> electrode pairs were found to be 97.4%, 93.8%, 92.44%, and 92.2%, respectively, indicating a good compatibility as it is close to one. The results show that color removal efficiencies at the optimal conditions were 86.3%, 90.8%, 91.5%, and 93.6% for Pt/TiO<sub>2</sub> , graphite/TiO<sub>2</sub> , TiO<sub>2</sub> /TiO<sub>2</sub> , and RuO<sub>2</sub> /TiO<sub>2</sub> , respectively. Furthermore, energy consumption cost at the optimum conditions was also evaluated, and the results were as follows: Pt/TiO<sub>2</sub> (0.95 €/m<sup>3</sup> ), graphite/TiO<sub>2</sub> (0.74 €/m<sup>3</sup> ), TiO<sub>2</sub> /TiO<sub>2</sub> (0.31 €/m<sup>3</sup> ), and RuO<sub>2</sub> /TiO<sub>2</sub> (0.26 €/m<sup>3</sup> ). Consequently, this research paper shows that all of the tested anodic materials give satisfactory color removal efficiencies higher than 86%. When energy consumption and color removal are considered together, the use of TiO<sub>2</sub> /TiO<sub>2</sub> and RuO<sub>2</sub> /TiO<sub>2</sub> pairs would be preferred. PRACTITIONER POINTS: Anodic contribution was investigated for decolorization of textile wastewater by electrooxidation process. Graphite, TiO<sub>2</sub> -coated Pt, TiO<sub>2</sub> -coated RuO<sub>2</sub> , and TiO<sub>2</sub> were used as anode materials. Highest color removal with lowest energy consumption was achieved with TiO<sub>2</sub> -coated RuO<sub>2</sub> anode material (93.6%).
environmental sciences,engineering, environmental,water resources,limnology