A JXTA-Based Peer Architecture for Enhanced Service Discovery in SOA-Based P2P Applications

Paolo Bocciarelli,A. D’Ambrogio,M. Angelaccio

DOI: https://doi.org/10.1007/978-3-642-22760-8_10

2010-12-13

Abstract:

What problem does this paper attempt to address?

Rational design and synthesis of 1,5-disubstituted tetrazoles as potent inhibitors of the MDM2-p53 interaction.

Ewa Surmiak,Constantinos G. Neochoritis,Bogdan Musielak,Aleksandra Twarda-Clapa,K. Kurpiewska,G. Dubin,C. Camacho,T. Holak,A. Dömling

DOI: https://doi.org/10.1016/j.ejmech.2016.11.029

IF: 7.088

2017-01-27

European Journal of Medicinal Chemistry

Abstract:
Spraying Layer-by-layer Assembly of Tannin-Fe3+ and Polyethyleneimine for Antibacterial Coating

Han Xu,Wei-pin Huang,Ke-feng Ren,Yi-min Tang

DOI: https://doi.org/10.1016/j.colcom.2021.100422

2021-01-01

Colloids and Interface Science Communications

Abstract:Tannic acid (TA), as a natural molecule, possesses many excellent properties. It has attracted wide interest in various fields of functional coatings, food, and medicine. A simple method to prepare thick and stable TA-contained coating is required, which may promote practical applications of TA. Here, we proposed a simple and effective method of generating a stable TA-rich coating by spraying layer-by-layer technology. The coating was stabilized basing on the complexation of TA and ferric (Fe3+) ions and poly(ethyleneimine) (PEI). Because both TA and PEI have good antibacterial properties, the (TA-Fe3+/PEI) coating displayed the contact-killing against E. coli. Further, because of the reductive nature of the TA, the coating was able to incorporate nano‑silver particles by reducing silver ions. Consequently, the enhanced antibacterial property was achieved. The (TA-Fe3+/PEI) coating was then spraying coated on the nonwoven mask, showing the potential application in medical protection.
Coupling APS/SPS Techniques for Cu-TiO2 Antibacterial Coating Deposition: Application to Water Treatment

Laurène Youssef,Audrey Prorot,Laurène Gnodé,Pierre Th'Madiou Verdieu,Armelle Vardelle,Vincent Rat,Alain Denoirjean

DOI: https://doi.org/10.3390/coatings14111426

IF: 3.236

2024-11-10

Coatings

Abstract:Since the COVID-19 pandemic, efforts in the field of surface decontamination have been redoubled. Finding innovative self-cleaning devices has become a challenge, and several solutions have been proposed in the market in recent years. In this work, an optimized powder/suspension plasma spray process at atmospheric pressure, using a Triplex Pro 210TM torch, is implemented to produce Cu-TiO2 surface coatings on stainless steel. The purpose is to investigate the potential improvement of antibacterial efficacy by the reactive surface species generated from TiO2 photoactivity under irradiation. A water-based suspension, prepared with AnalaR NORMAPURTM TiO2, is used as a precursor to incorporate the photocatalyst into an antibacterial copper matrix. Surface antibacterial tests according to ASTM 2180 standards were performed, and experiments were performed in treated contaminated water. Sub-stoichiometric blue TiO2 coatings showed complete bacterial elimination after 90 min of visible light irradiation, and Cu-TiO2 surface coatings were even able to disinfect the surfaces under white light, making the application interesting for bacterial destruction under natural illumination. These materials are also intended for application in water treatment, including both pathogens and chemical micropollutants, which is a pressing issue facing many countries today.

materials science, multidisciplinary,physics, applied, coatings & films
Inactivation of SARS-CoV-2 and Photocatalytic Degradation by TiO2 Photocatalyst Coatings

Yun Lu,Sujun Guan,Liang Hao,Hiroyuki Yoshida,Shohei Nakada,Taisei Takisawa,Takaomi Itoi

DOI: https://doi.org/10.1038/s41598-022-20459-2

IF: 4.6

2022-01-01

Scientific Reports

Abstract:The novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) causative agent of the COVID-19, which is a global pandemic, has infected more than 552 million people, and killed more than 6.3 million people. SARS-CoV-2 can be transmitted through airborne route in addition to direct contact and droplet modes, the development of disinfectants that can be applied in working spaces without evacuating people is urgently needed. TiO2 is well known with some features of the purification, antibacterial/sterilization, making it could be developed disinfectants that can be applied in working spaces without evacuating people. Facing the severe epidemic, we expect to fully expand the application of our proposed effective approach of mechanical coating technique (MCT), which can be prepared on a large-scale fabrication of an easy-to-use TiO2/Ti photocatalyst coating, with hope to curb the epidemic. The photocatalytic inactivation of SARS-CoV-2 and influenza virus, and the photocatalytic degradation of acetaldehyde (C2H4O) and formaldehyde (CH2O) has been investigated. XRD and SEM results show that anatase TiO2 successfully coats on the surface of Ti coatings, while the crystal structure of anatase TiO2 can be increased during the following oxidation in air. The catalytic activity towards methylene blue of TiO2/Ti coating balls has been significantly enhanced by the followed oxidation in air, showing a very satisfying photocatalytic degradation of C2H4O and CH2O. Notably, the TiO2/Ti photocatalyst coating balls demonstrate a significant antiviral activity, with a decrease rate of virus reached 99.96% for influenza virus and 99.99% for SARS-CoV-2.
Rosmarinic acid in Argusia argentea inhibits snake venom-induced hemorrhage

H. Aung,T. Nikai,M. Niwa,Y. Takaya

DOI: https://doi.org/10.1007/s11418-010-0428-3

IF: 3.1921

2010-05-29

Journal of Natural Medicines

Abstract:
Droplet-capturing coatings on environmental surfaces based on cosmetic ingredients

Zhilong Yu,Murat Kadir,Yihan Liu,Jiaxing Huang

DOI: https://doi.org/10.1016/j.chempr.2021.05.017

IF: 23.5

2021-08-01

Chem

Abstract:Transmission of infectious respiratory diseases starts with pathogen-laden respiratory droplets released from a source, the removal of which should help to prevent or slow down the overall spread of the pathogens. Here, we demonstrate that a surface-agnostic, non-destructive, polymer-based coating can significantly enhance the capture of aerosols and droplets. The water-based formulation contains only cosmetic ingredients and yields uniform and conformal coatings on a broad range of indoor environmental surfaces, regardless of the material composition, wettability, and texture. The coating remains transparent and haze free even after extensive droplet deposition. Additives can be incorporated to bring additional functions, such as coloration and sanitization. The strategy enhances the function of transparent protective barriers and can repurpose large areas of barely touched indoor environmental surfaces for droplet removal, eliminating these infectious sources from the chain of transmission.

chemistry, multidisciplinary
Silver nanoparticles /graphene oxide arranged on polytetrafluoroethylene substrate hydrophilic modified with TiO2 to construct efficient air purification material

Chen Chen,Wenping Li,Xiaohui Liu,Junjie Yu,Shijun Xing,Jiazhi Yang,Qiaofeng Han

DOI: https://doi.org/10.1016/j.jece.2023.110848

IF: 7.7

2023-08-01

Journal of Environmental Chemical Engineering

Abstract:Recently, the harsh air environment caused by disasters and human activities poses a great challenge to the development of efficient and antibacterial air purification systems to protect human health. In this work, a new type of high-efficiency polytetrafluoroethylene (PTFE) air filter was successfully prepared by employing silver nanoparticles decorated with graphene oxide (Ag NPs/GO) functional materials that deposited in PTFE substrate membranes hydrophilic modified with TiO2 for the improvement of the enclosed space air quality. The results revealed that the introduction of TiO2 can improve the interfacial adhesion between PTFE membrane and functional materials, improving the feasibility of long-term application of composite membrane. The composite membrane possessed the crisscross network structure interconnected by fibrils, which gives the membrane high-efficiency particulate matters (PMs) removal rate (99.25% for PM2.5) without sacrificing the pressure drop (90.52 Pa). Moreover, the prepared composite membrane also has more excellent antibacterial performance (98.7% for Escherichia coli (E. coli)), which can reduce the secondary pollution caused by improper post-treatment of the polluted filter in practical applications. After simple cleaning and regeneration, the composite membrane can still maintain an ultra-high particle removal rate (over 95%) after 5 cycles. The prepared efficiency air filtration composite membranes have positive potential applications in air purification.

engineering, chemical, environmental
One-pot fabrication of potent antimicrobial and antiviral films with eco-friendly in situ after-use disposal

Lingdai Liu,Simon Swift,John Taylor,Ashley N. Nutsford,Cherie Tollemache,Ziqi Lu,Pooja Yadav,Zoran Zujovic,Jacqueline Ross,Joseph Vella,Shurui Chen,Janesha Perera,Dan Li,Paul A. Kilmartin

DOI: https://doi.org/10.1016/j.cej.2023.148406

IF: 15.1

2024-01-15

Chemical Engineering Journal

Abstract:Antimicrobial and antiviral films are effective barriers that can impede the transmission of deleterious pathogens and safeguard human health. However, the broad utilization of these materials has been hampered by their costs and availability, difficulties in mass manufacture, and concerns about their accumulation as landfill wastes endangering the ecosystems. Here, we developed a facile process to fabricate potent antimicrobial and antiviral films following one-step in situ thermal curing at 140 °C for only 10 min. These films were derived from thermal modifications of polyvinyl alcohol (PVA) acidified with sulfuric acid and loaded with 0 – 1 % (w/w) of akaganéite (β-FeOOH) nanorods. The optimized films rapidly eliminated the majority (80 – 100 %) of Staphylococcus aureus , Escherichia coli, and Influenza A viruses after 10 min of surface contact. Moreover, owing to the β-FeOOH-mediated catalysis of hydrogen peroxide (H 2 O 2 ), the composite films can be in situ modified after brief immersion in H 2 O 2 aqueous solutions, and ultimately dissolved to yield 'zero solid waste'. The bacteria-killing efficacies of these films and their dissolution in H 2 O 2 solutions can be easily promoted by simulated sunlight irradiation. This work provides a simple scheme to fabricate powerful antimicrobial and antiviral films using low-cost, readily available, eco-friendly, and highly scalable materials. The current films are promising interface materials to confront widespread outbreaks of infectious bacteria and enveloped viruses without imposing severe environmental burdens.

engineering, chemical, environmental
Design and performance evaluation of a photocatalytic reactor for indoor air disinfection

Silvia Mercedes Zacarías,Agustina Manassero,Silvana Pirola,Orlando Mario Alfano,María Lucila Satuf

DOI: https://doi.org/10.1007/s11356-020-11663-6

IF: 5.8

2020-11-21

Environmental Science and Pollution Research

Abstract:Since COVID-19 pandemic, indoor air quality control has become a priority, and the development of air purification devices effective for disinfecting airborne viruses and bacteria is of outmost relevance. In this work, a photocatalytic device for the removal of airborne microorganisms is presented. It is an annular reactor filled with TiO2-coated glass rings and irradiated internally and externally by UV-A lamps. B. subtilis spores and vegetative cells have been employed as model biological pollutants. Three types of assays with aerosolized bacterial suspensions were performed to evaluate distinct purification processes: filtration, photocatalytic inactivation in the air phase, and photocatalytic inactivation over the TiO2-coated rings. The radiation distribution inside the reactor was analysed by performing Monte Carlo simulations of photon absorption in the photocatalytic bed. Complete removal of a high load of microorganisms in the air stream could be achieved in 1 h. Nevertheless, inactivation of retained bacteria in the reactor bed required longer irradiation periods: after 8 h under internal and external irradiation, the initial concentration of retained spores and vegetative cells was reduced by 68% and 99%, respectively. Efficiency parameters were also calculated to evaluate the influence of the irradiation conditions on the photocatalytic inactivation of bacteria attached at the coated rings.

environmental sciences
(Invited) A Flexible Anti-Biofilm Hygiene Coating for Water Devices

Junjie Niu

DOI: https://doi.org/10.1149/ma2023-02181203mtgabs

2023-12-22

ECS Meeting Abstracts

Abstract:Biofilm is a microbiome complex comprising different bacterial colonies that typically adhere to device surfaces in water, which causes serious medical issues such as indwelling infections and outbreaks. Here we introduce a non-nanoparticle, flexible anti-biofilm hygiene coating consisting of lithocholic acid (LCA), zinc pyrithione (Zn) and cinnamaldehyde (Cn) (named as LCA-Zn-Cn) that largely prevents the bacteria adhesion to various water device surfaces such as stainless steel and glass through a synergistic mechanism ( ACS Applied Bio Materials , 5 (2022) 3991). The existing chelated groups on LCA and Cn attract plenty of bacteria via hydrophobic interaction. Both bactericidal reaction by grafting biocidal groups from both LCA and Cn and bacteriostatic reaction by inhibiting cell division via zinc ions (Zn) lead to a largely improved bacteria/biofilm prevention. The antibacterial performance was assessed by using JIS Z 2801/ISO 22196 method. The designed LCA-Zn-Cn coating displayed log 10 reduction of 4.23 (99.9% reduction) of E. coli and log 10 reduction of 3.51 (99.8% reduction) of E. faecalis on stainless steel, which are much higher than the control samples, demonstrating a promising colonization inhibition. Due to the strong crosslinked configuration, the coating still showed >90.9% bacterial reduction after 3000 abrasion cycles and over 99.9% bacteria reduction after a high flow velocity of 1.99 m/s test, which confirmed the enhanced mechanical durability. By applying either spray or dip-coating, the designed polymer composite can be coated on a variety of irregular water devices with mass production using auto-controlled robot arm. The desired hybrid coating provides an effective solution to prevent bacterium and biofilm formation on flexible water devices. Keywords: Anti-biofilm; Anti-bacteria; Coating; Water devices; Flexibility
CuO/ZnO Heterojunction Nanofilm for Effective Photocatalytic Disinfection

Kai Yang,Renyuan Deng,Chaofeng Wang,Shuilin Wu,Zhenduo Cui,Yufeng Zheng,Zhaoyang Li,Hui Jiang,Shengli Zhu,Paul K. Chu,Xiangmei Liu

DOI: https://doi.org/10.1016/j.surfin.2024.105023

IF: 6.2

2024-01-01

Surfaces and Interfaces

Abstract:Pathogenic bacteria can spread rapidly from contaminated surfaces to human skin once humans touch such surfaces, resulting in contact infection and subsequent bacterial infectious diseases. In addition to the bacterial drug resistance induced by overuse of antibiotics, the commonly used antibiotic bacteria-killing strategy is unsuitable for surface sterilization of facilities. Herein, a heterojunction CuO/ZnO nanofilm was constructed on glass plates by calcination and atomic layer deposition. This film exhibited excellent photocatalytic antibacterial activity under visible light. The heterostructure between CuO and ZnO at the interface accelerated the separation of photogenerated electrons and holes, resulting in increased yield of reactive oxygen species, which effectively kill bacteria. After 5 min of simulated sunlight irradiation, the antibacterial efficiencies of CuO/ZnO against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) were 99.68 +/- 0.31 % and 96.49 +/- 0.78 %, respectively. The photocatalytic antimicrobial nanofilm synthesized in this study can potentially be used for rapid and safe disinfection of contact surfaces in public facilities.
Superlattice Nanofilm on a Touchscreen for Photoexcited Bacteria and Virus Killing by Tuning Electronic Defects in the Heterointerface

Jun Li,Chaofeng Wang,Shuilin Wu,Zhenduo Cui,Yufeng Zheng,Zhaoyang Li,Hui Jiang,Shengli Zhu,Xiangmei Liu

DOI: https://doi.org/10.1002/adma.202300380

IF: 29.4

2023-01-01

Advanced Materials

Abstract:Currently, the global COVID-19 pandemic has significantly increased the public attention toward the spread of pathogenic viruses and bacteria on various high-frequency touch surfaces. Developing a self-disinfecting coating on a touchscreen is an urgent and meaningful task. Superlattice materials are among the most promising photocatalysts owing to their efficient charge transfer in abundant heterointerfaces. However, excess electronic defects at the heterointerfaces result in the loss of substantial amounts of photogenerated charge carrier. In this study, a ZnOFe2 O3 superlattice nanofilm is designed via atomic layer deposition for photocatalytic bactericidal and virucidal touchscreen. Additionally, electronic defects in the superlattice heterointerface are engineered. Photogenerated electrons and holes will be rapidly separated and transferred into ZnO and Fe2 O3 across the heterointerfaces owing to the formation of ZnO, FeO, and ZnFe covalent bonds at the heterointerfaces, where ZnO and Fe2 O3 function as electronic donors and receptors, respectively. The high generation capacity of reactive oxygen species results in a high antibacterial and antiviral efficacy (>90%) even against drug-resistant bacteria and H1N1 viruses under simulated solar or low-power LED light irradiation. Meanwhile, this superlattice nanofilm on a touchscreen shows excellent light transmission (>90%), abrasion resistance (106 times the round-trip friction), and biocompatibility.
Synergistic Polymer Coatings with Antibacterial and Antiviral Properties for Healthcare Applications

Lina Duque-Sanchez,Paul J Pasic,Camille Esneau,Vishek Batra,Ghian Tjandaputra,Tony Tan,Nathan Bartlett,Helmut Thissen

DOI: https://doi.org/10.1021/acsomega.4c02235

IF: 4.1

2024-07-17

ACS Omega

Abstract:The role of frequently touched surfaces in the transmission of infectious diseases is well-documented, and the urgent need for effective surface technologies with antipathogen activity has been highlighted by the recent global pandemic and rise in antimicrobial resistance. Here, we have explored combinations of up to 3 different classes of compounds within a polymeric matrix to enable the fabrication of coatings with broad-spectrum activity. Compounds were either based on metals or metal oxides, namely, copper, silver, and copper oxide, essential oils, namely, cinnamaldehyde, tea tree oil, and carvacrol oil, or cationic polymers, namely, poly(ε-lysine) and poly(hexamethylene biguanide). These compounds were mixed into a polymer matrix, coated, and dried to yield durable coatings. Coatings containing up to 7.5% (w/w) of the compounds were assessed in the zone of inhibition and biofilm assays using Staphylococcus aureus and Pseudomonas aeruginosa, as well as infectivity assays using human coronavirus OC43. Our data demonstrate that a selected combination of additives was able to provide a 5-log reduction in the colony-forming units of both bacteria and a 4-log reduction in viral infectivity. This simple but highly effective technology is expected to find applications in environments such as hospitals, aged care facilities, or public transport.
LC method for determination of rasagiline mesylate in different plasma matrices and its application to oral pharmacokinetic study in rabbits.

P. Ravi,N. Aditya,L. Cherian,S. Patil

DOI: https://doi.org/10.1093/chromsci/bms096

2013-01-10

Journal of Chromatographic Science

Abstract:A simple, rapid and sensitive reverse-phase liquid chromatographic method is developed and validated for estimation of rasagiline mesylate in different plasma matrices (rat, rabbit and human plasma). The method employs an isocratic elution technique with a Kromasil C18 column and has an optimized mobile phase composition of 10 mM ammonium acetate buffer-acetonitrile (40:60 v/v). The plasma samples displayed linear detector responses in the concentration range of 0.5-20 µg/mL in all plasma matrices when monitored at 265 nm using an ultraviolet detector. Because the simple protein precipitation method yields over 95% recovery of rasagiline mesylate from all plasma matrices, no internal standard was used in this method. A detailed validation study of the method proves the accuracy, precision and selectivity (in estimating rasagiline mesylate) in all plasma matrices. The drug is also stable under various processing and storage conditions in all plasma matrices, as evident from the study. The present method was applied to determine the drug-protein binding ratio in all the plasma matrices. The use of this method in determining pharmacokinetic parameters of rasagiline mesylate by non-compartmental analysis after oral dosing in rabbits is also discussed.
Development of Environmentally Friendly Biocidal Coatings Based on Water-soluble Copolymers for Air-cleaning Filters

Denisa Druvari,Ioanna Tzoumani,Zoi Piperigkou,Kyriaki Tzaferi,Dimitris Tselentis,Alexios Vlamis-Gardikas,Nikos K. Karamanos,Georgios Bokias,Joannis K. Kallitsis

DOI: https://doi.org/10.1021/acsomega.2c04427

IF: 4.1

2022-10-11

ACS Omega

Abstract:Air pollution by pathogens has posed serious concern on global health during the last decades, especially since the breakout of the last pandemic. Therefore, advanced high-efficiency techniques for air purification are highly on demand. However, in air-filtering devices, the prevention of secondary pollution that may occur on the filters remains a challenge. Toward this goal, in the present work, we demonstrate a facile and eco-friendly process for the biocidal treatment of commercial...

chemistry, multidisciplinary
Mechano-Induced Assembly of a Nanocomposite for “Press-N-Go” Coatings with Highly Efficient Surface Disinfection

Changshun Hou,Chen Xu,Bo Yi,Xin Huang,Chunyan Cao,Youngjin Lee,Sheng Chen,Xi Yao

DOI: https://doi.org/10.1021/acsami.1c03156

2021-04-19

Abstract:Using antimicrobial coatings to control the spread of pathogenic microbes is appreciated in public and healthcare settings, but the performance of most antimicrobial coatings could not fulfill the increasing requirements, particularly the ease of preparation, high durability, rapid response, and high killing efficiency. Herein, we develop a new type of mechano-induced assembly of nanocomposite coating by simple "Press-N-Go" procedures on various substrates such as glassware, gloves, and fabrics, in which the coating shows strong adhesion, high shear stability, and high stiffness, making it durable in daily use to withstand common mechanical deformation and scratches. The coating also shows remarkable disinfection effectiveness over 99.9% to clinically significant multiple drug-resistant bacterial pathogens upon only 6 s near-infrared irradiation, which can be further improved to over 99.9999% upon another 6 s treatment. We envision that the coating can provide convenience and values to control pathogen spread for easily contaminated substrates in high-risk areas.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c03156?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c03156</a>.Fourier transform infrared spectra of the , UPy-PDMS, and carboxylated <sub>2</sub>; TEM images in each preparation process; schematic illustration of the mechano-induced coating formation; coated glass slide is soaked into acetone and alcohol with sonification for dissociation; shear modulus of the mechano-induced coating with/without CLs; force-piezo position curves of the coating; SEM image shows the surface topography of the coating; elemental mapping of the coating; X-ray photoelectron spectrum of the coating; normalized absorbance spectra of GNRs, carboxylated <sub>2</sub> and the coating; maximum average surface temperature of the coating; thermogravimetric analysis; bacterial killing ratios are improved over 99.9999% after two cycles of irradiation for 6 s; schematic of the transmission process by coughing or sneezing to generate microdroplets containing bacteria; live/dead staining; images show the mechano-induced assembly of powder precursors on some easily contaminated surfaces; coating has moderate hydrophobicity with a water contact angle around 88.3°; ASTM standard cross-hatch adhesion test; simulative temperature variations at the inner and outer layer of the glove; and mechanical properties of the coatings (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03156/suppl_file/am1c03156_si_001.pdf">PDF</a>)Temperature variation of the coated glass upon 60 s irradiation and its cooling process recorded using an IR camera (4× speed) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03156/suppl_file/am1c03156_si_002.avi">AVI</a>)Temperature variation of the bare glass upon 60 s irradiation and its cooling process recorded using an IR camera (4× speed) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03156/suppl_file/am1c03156_si_003.avi">AVI</a>)Coated glove can be used normally in air and in water (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03156/suppl_file/am1c03156_si_004.avi">AVI</a>)Temperature variations at the outer layer and inner layer of the glove upon 6 s irradiation and their cooling processes (4× speed) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03156/suppl_file/am1c03156_si_005.avi">AVI</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
Preparation of antibacterial composite fiber membrane for air filtration with micro/nano structure

Ching Wen Lou,Sen Li,Yujia Fan,Ting-Ting Li,Xing Liu,Liyan Liu,Bing-Chiuan Shiu,Jia-Horng Lin

DOI: https://doi.org/10.1016/j.jmrt.2023.05.075

IF: 6.267

2023-05-20

Journal of Materials Research and Technology

Abstract:With the aggravation of environmental pollution and the worldwide epidemic of infectious diseases, there is a higher demand for air filtration materials to intercept fine particulate matter and capture biological pollutants. Polypropylene (PP)/polycarbonate (PC) blends were melt blown and electrospun with polytetrafluoroethylene (PTFE) on their surfaces. The PP/PC/PTFE membranes structure with micro-nanostructure was constructed through the melt-blown layer with micron structure and the electrospun layer with the nanostructure. Carboxymethyl chitosan (CMCS) was loaded onto the surface of the PP/PC melt-blown layer. The synergistic effect of micro-nanostructure and CMCS can effectively capture PM2.5 and make the composite membrane have excellent antibacterial performance. The inhibition rates of PP/PC/PTFE composite membrane loaded with 5%CMCS against Staphylococcus aureus and Escherichia coli reached 81.54% and 86.1%, respectively. The filtration efficiency of PP/PC/PTFE composite membrane loaded with 5% CMCS is close to 100% for 0.25μm particles, and the average filtration efficiency for 0.200-4.596μm and 0.200-2.500μm particles is 97.31% and 97.27%, respectively. After washing and drying five times, the corresponding inhibition rate only lost 16.52% and 4.24%. The micro/nano structure composite membrane prepared in this study has good antibacterial performance, high filtration efficiency, good stability, and is an excellent antibacterial high efficiency air filter. It provides a new idea for the preparation of air filter fiber composites.

materials science, multidisciplinary,metallurgy & metallurgical engineering
CuO Nanoparticles-Containing Highly Transparent and Superhydrophobic Coatings with Extremely Low Bacterial Adhesion and Excellent Bactericidal Property.

Junhui He,Yue Zhang,Mingqing Yang,Kaikai Wang,Tingting Ren

DOI: https://doi.org/10.1021/acsami.8b09945

2018-07-23

Abstract:Human health and industrial instruments have been suffering from bacterial colonization on the surface of materials for a long time. Recently, antibacterial coatings are regarded as the new strategy to resist bacterial pathogens. In this work, novel highly transparent and superhydrophobic coatings with extremely low bacterial adhesion and bactericidal performance were prepared by spray-coating hydrophobic silica sol and CuO nanoparticles. The coated glass showed high transmittance in 300-2500 nm with a maximum value of 96.6%. Compared with bare glass, its superhydrophobic characteristics resulted in a reduction in adhesion of bacteria ( Escherichia coli, E. coli) by up to 3.2 log cells/cm2. Additionally, the live/dead staining test indicated that the as-prepared coating exhibited excellent bactericidal performance against E. coli. Moreover, the as-prepared coating could maintain their superhydrophobicity after the sand impact test. The proposed method to fabricate such coatings could be applied on various substrates. Therefore, this novel hybrid surface with the abilities to reduce bacterial adhesion and kill attached bacteria make it a promising candidate for biosensors, microfluidics, bio-optical devices, household facilities, lab-on-chips, and touchscreen devices.

Medicine,Materials Science
A Polytetrafluoroethylene (PTFE) and Nano-Al2O3 Based Composite Coating with a Bacteriostatic Effect against E. coli and Low Cytotoxicity

Dmitriy E. Burmistrov,Dmitriy A. Serov,Aleksander V. Simakin,Ilya V. Baimler,Oleg V. Uvarov,Sergey V. Gudkov

DOI: https://doi.org/10.3390/polym14214764

IF: 5

2022-11-08

Polymers

Abstract:The problem of bacterial contamination through surfaces is important for the food industry. In this regard, there is a growing interest in new coatings based on nanoparticles that can provide a long-term antibacterial effect. Aluminum oxide nanoparticles are a good candidate for such coatings due to their availability and good biocompatibility. In this study, a coating containing aluminum oxide nanoparticles was produced using polytetrafluoroethylene as a polymer matrix—a polymer that exhibits excellent mechanical and physicochemical properties and it is not toxic. The obtained coatings based on "liquid Teflon" containing various concentrations of nanoparticles (0.001–0.1 wt%) prevented the bacterial growth, and they did not exhibit a cytotoxicity on animal cells in vitro. Such coatings are designed not only to provide an antibacterial surface effect, but also to eliminate micro damages on surfaces that inevitably occur in the process of food production.

polymer science
Facile fabrication of antibacterial and antiviral perhydrolase-polydopamine composite coatings

Li-Sheng Wang,Shirley Xu,Sneha Gopal,Eunsol Kim,Domyoung Kim,Matthew Brier,Kusum Solanki,Jonathan S Dordick

DOI: https://doi.org/10.1038/s41598-021-91925-6

2021-06-14

Abstract:In situ generation of antibacterial and antiviral agents by harnessing the catalytic activity of enzymes on surfaces provides an effective eco-friendly approach for disinfection. The perhydrolase (AcT) from Mycobacterium smegmatis catalyzes the perhydrolysis of acetate esters to generate the potent disinfectant, peracetic acid (PAA). In the presence of AcT and its two substrates, propylene glycol diacetate and H2O2, sufficient and continuous PAA is generated over an extended time to kill a wide range of bacteria with the enzyme dissolved in aqueous buffer. For extended self-disinfection, however, active and stable AcT bound onto or incorporated into a surface coating is necessary. In the current study, an active, stable and reusable AcT-based coating was developed by incorporating AcT into a polydopamine (PDA) matrix in a single step, thereby forming a biocatalytic composite onto a variety of surfaces. The resulting AcT-PDA composite coatings on glass, metal and epoxy surfaces yielded up to 7-log reduction of Gram-positive and Gram-negative bacteria when in contact with the biocatalytic coating. This composite coating also possessed potent antiviral activity, and dramatically reduced the infectivity of a SARS-CoV-2 pseudovirus within minutes. The single-step approach enables rapid and facile fabrication of enzyme-based disinfectant composite coatings with high activity and stability, which enables reuse following surface washing. As a result, this enzyme-polymer composite technique may serve as a general strategy for preparing antibacterial and antiviral surfaces for applications in health care and common infrastructure safety, such as in schools, the workplace, transportation, etc.

A JXTA-Based Peer Architecture for Enhanced Service Discovery in SOA-Based P2P Applications

Rational design and synthesis of 1,5-disubstituted tetrazoles as potent inhibitors of the MDM2-p53 interaction.

Spraying Layer-by-layer Assembly of Tannin-Fe3+ and Polyethyleneimine for Antibacterial Coating

Coupling APS/SPS Techniques for Cu-TiO2 Antibacterial Coating Deposition: Application to Water Treatment

Inactivation of SARS-CoV-2 and Photocatalytic Degradation by TiO2 Photocatalyst Coatings

Rosmarinic acid in Argusia argentea inhibits snake venom-induced hemorrhage

Droplet-capturing coatings on environmental surfaces based on cosmetic ingredients

Silver nanoparticles /graphene oxide arranged on polytetrafluoroethylene substrate hydrophilic modified with TiO2 to construct efficient air purification material

One-pot fabrication of potent antimicrobial and antiviral films with eco-friendly in situ after-use disposal

Design and performance evaluation of a photocatalytic reactor for indoor air disinfection

(Invited) A Flexible Anti-Biofilm Hygiene Coating for Water Devices

CuO/ZnO Heterojunction Nanofilm for Effective Photocatalytic Disinfection

Superlattice Nanofilm on a Touchscreen for Photoexcited Bacteria and Virus Killing by Tuning Electronic Defects in the Heterointerface

Synergistic Polymer Coatings with Antibacterial and Antiviral Properties for Healthcare Applications

LC method for determination of rasagiline mesylate in different plasma matrices and its application to oral pharmacokinetic study in rabbits.

Development of Environmentally Friendly Biocidal Coatings Based on Water-soluble Copolymers for Air-cleaning Filters

Mechano-Induced Assembly of a Nanocomposite for “Press-N-Go” Coatings with Highly Efficient Surface Disinfection

Preparation of antibacterial composite fiber membrane for air filtration with micro/nano structure

CuO Nanoparticles-Containing Highly Transparent and Superhydrophobic Coatings with Extremely Low Bacterial Adhesion and Excellent Bactericidal Property.

A Polytetrafluoroethylene (PTFE) and Nano-Al2O3 Based Composite Coating with a Bacteriostatic Effect against E. coli and Low Cytotoxicity

Facile fabrication of antibacterial and antiviral perhydrolase-polydopamine composite coatings