Abstract:The electrochemical reduction of CO 2 using copper-based electrocatalysts offers a route to produce high-value multicarbon (C 2+ ) products from renewable electricity (Nat. Catal. 4, 952-958 (2021); Nature 614, 262-269 (2023)). To date, the efficient electrocatalytic conversion of CO 2 to multicarbon products has only been possible when using impurity-free CO 2 sources, such as from direct air capture. The generation of such high-grade CO 2 streams is expensive, accounting for almost half of the total energy required for both capture and electroreduction processes (Nat. Catal. 4, 952-958 (2021)). Conversely, capturing CO 2 from point sources, such as industrial flue gas, is more efficient due to the higher concentration of CO 2 in the feed. However, trace amounts of sulfur dioxide (10 ~ 400 ppm SO 2 ) inherently present in these streams will significantly degrade the CO 2 conversion process. All previous attempts to convert CO 2 with SO 2 present in the feed have resulted in immediate catalyst poisoning and an irreversible loss of CO 2 conversion activity. In this study, we designed a modified catalyst layer to react a stream of dilute CO 2 containing 400 ppm SO 2 to multicarbon products with high stability and performance metrics that match or exceed those achieved with pure CO 2 streams. Driven by density function theory and COMSOL simulations, we designed an ionomer:copper:polytetrafluoroethylene (PTFE) (ICP) electrode that features both hydrophobic and highly-charged hydrophilic domains to limit water adsorption and promote CO 2 over SO 2 transport near the electrochemically active sites. This deactivates the SO 2 poisoning mechanism, thus enabling stable and efficient CO 2 conversion (see figure). Our approach achieved a sustained C 2+ Faradaic efficiency (FE) of 50% for the initial 160 hours at 100 mA cm-2. In order to improve the overall C 2+ current efficiency (j C2+ ) towards industrial scales, we applied our strategy in high-surface-area copper electrodes. We achieved CO 2 conversion in the presence of 400 ppm SO 2 with a C 2+ FE of 76% at a current density of 700 mA cm-2, surpassing what can be achieved in existing integrated CO 2 capture-electrolysis systems that use pure CO 2 . Overall, our approach provides a fully 140-fold increase in performance (FE C2+ × j C2+ ) compared to the best prior CO 2 conversion systems with added SO 2 (Nat. Nanotechnol. doi: 10.1038/s41565-022-01286-y (2023); J. Am. Chem. Soc. 141, 9902-9909 (2019)). These findings represent an important advancement in the field of CO 2 conversion and highlight the potential of our strategy for industrial-scale applications. Figure 1

Nafion-Mediated Proton Transfer Facilitates the Electroreduction of SO 2 to H 2 S

Electrochemical Removal of Hydrogen Sulfide and Recovery of the Deposited Sulfur on the Anode from Wastewater

Insight into the Effective Electrocatalytic Sulfide Removal from Aqueous Solutions Using the Surface Oxidized Stainless-Steel Anode and Its Desulfurization Mechanism

Coupling Fe(II)/Fe(III) Redox Mediated SO2 Conversion with Hydrogen Production

A gas permeable membrane electrode for selective and durable H2S production from SO2

Electrocatalytic Sulfion Recycling Assisted Energy-Saving Hydrogen Production by CuCo-Based Nanosheet Arrays

Electric Field Generated at the Millisecond Pulse-Polarized Interface Facilitates the Electrolytic Conversion of SO2 into H2S

Efficient electrocatalytic desulfuration and synchronous hydrogen evolution from H 2 S via anti-sulfuretted NiSe nanowire array catalyst

High-entropy Sulfide Catalyst Boosts Energy-saving Electrochemical Sulfion Upgrading to Thiosulfate Coupled with Hydrogen Production

Interface‐Engineered NiFe/Ni‐S Nanoparticles for Reliable Alkaline Oxygen Production at Industrial Current: A Sulfur Source Confinement Strategy

Fe2NiSe4 Nanowires Array for Highly Efficient Electrochemical H2S Splitting and Simultaneous Energy-Saving H2 Production

Constructing FeS and ZnS Heterojunction on N,S-Codoped Carbon as Robust Electrocatalyst toward Oxygen Reduction Reaction

Bifunctional Cobalt–Nickel Sulfide Nanoflowers as Electrocatalysts for Concurrent Energy-Efficient Hydrogen Production and Sulfur Recycling

Electrochemical processes for simultaneous sulfur and energy recoveries from sulfide-containing wastewater

Highly-efficient natural gas desulfurization and simultaneous H2O2 synthesis based on the electrochemical coupling reaction strategy

Engineering interfacial sulfur migration in transition-metal sulfide enables low overpotential for durable hydrogen evolution in seawater

Energy-saving hydrogen production from sulfion oxidation-hybrid seawater splitting enabled by superwettable corrosion-resistant NiFe layered double hydroxide/FeNi2S4 heterostructured nanoarrays

SO2-Tolerant Electrocatalytic Reduction of CO2 from Simulated Industrial Flue Gas

Bifunctional Co3S4 Nanowires for Robust Sulfion Oxidation and Hydrogen Generation with Low Power Consumption

Sustainable Sulfur‐Carbon Hybrids for Efficient Sulfur Redox Conversions in Nanoconfined Spaces

Facile, Cost-Effective Plasma Synthesis of Self-Supportive FeSx on Fe Foam for Efficient Electrochemical Reduction of N-2 under Ambient Conditions