Abstract:In this study, three machine learning models of data analysis based on multiple linear regression (MLR), multiple nonlinear regression (MNR), and artificial neural network (ANN) has been proposed to model the behavior of 5methyl-1 H-benzotriazole (m-BTA) inhibitor on N80 steel in acidic media at different temperatures and inhibitor concentration. Based on experimental observation, the DC trend removal by Polynomial detrending revealed a suitable trend between electrochemical noise (ECN) measurement data and the results obtained from electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization test at m-Factor equals to 3, 4, and 5. The inhibition efficiency (η) of 91% was achieved by using 0.001 M of m-BTA inhibitor. The corrosion rate will increase by increasing the temperature for the blank sample. Still, the m-BTA resulted in corrosion protection for N80 at high temperatures, and ECN resistance (Rn) increases with increased m-BTA concentration. The experimental tests revealed that temperature and m-factor are significant for corrosion inhibition of m-BTA; also, inhibitor concentration is an essential factor. Therefore, these three parameters were chosen as inputs for the Rn of the inhibitor. Removing unnecessary data from the original dataset causes relevant results compatible with experimental observations. The results of the reduced data set showed that R2 for the test of whole and reduced MLR model is 0.41 and 0.69, respectively, which shows that the reduced model is more suitable for modeling the training data than the whole model. The MNR model presents better accuracy than the MLR model, demonstrating that the relation between inputs and output does not follow a linear dependency. Several topologies of the ANN model were constructed, and the number of neurons was changed in one hidden layer. Finally, five neurons in the hidden layer with the Levenberg–Marquardt backpropagation (LMBP) algorithm were selected to develop the optimum ANN model, which has R2 and RMSE values of 0.99 and 17.41.

Machine learning modeling of time-dependent corrosion rates of carbon steel in presence of corrosion inhibitors

Corrosion rate prediction and influencing factors evaluation of low-alloy steels in marine atmosphere using machine learning approach

Corrosion Inhibition, Inhibitor Environments, and the Role of Machine Learning

Development of a Predictive Model for Carbon Dioxide Corrosion Rate and Severity Based on Machine Learning Algorithms

Machine learning-based corrosion rate prediction of steel embedded in soil

Improvement of the machine learning-based corrosion rate prediction model through the optimization of input features

On the Use of Machine Learning Algorithms to Predict the Corrosion Behavior of Stainless Steels in Lactic Acid

Prediction of electrochemical corrosion behavior of magnesium alloy using machine learning methods

Development of Machine Learning Techniques in Corrosion Inhibition Evaluation of 5-Methyl-1 H-benzotriazole on N80 Steel in Acidic Media

Prediction of Magnesium Alloy Corrosion Based on Machine Learning Method

Machine learning prediction of corrosion rate of steel in carbonated cementitious mortars

Data-driven pitting evolution prediction for corrosion-resistant alloys by time-series analysis

Data Mining Model for Prediction Effect of Corrosion Inhibition

Towards understanding and prediction of atmospheric corrosion of an Fe/Cu corrosion sensor via machine learning

Prediction of Mg Alloy Corrosion Based on Machine Learning Models

A Probabilistic Model For Corrosion Prediction Of Steel Reinforcement

Data-driven corrosion inhibition efficiency prediction model incorporating 2D–3D molecular graphs and inhibitor concentration

Investigation of Best QSPR-Based Machine Learning Model to Predict Corrosion Inhibition Performance of Pyridine-Quinoline Compounds

Chemoinformatics for corrosion science: Data‐driven modeling of corrosion inhibition by organic molecules

Application of machine learning models to investigate the performance of stainless steel type 904 with agricultural waste

Model construction of corrosion resistance of alloying elements for low alloy steel in marine atmospheric corrosive environment based on machine learning