Abstract:Biomass fast pyrolysis fluidized bed reactor is regarded as one of the most promising technologies for high value utilization of biomass. In this work, one two-dimensional fluidized bed reactor model was established, coupling with multiphase CFD simulation method and pyrolysis reaction kinetics, and further verified by the experimental data. This work mainly investigated the effects of biomass inlet and nitrogen inlet modes on multi-process characteristics, such as flow behavior, heat transfer and pyrolysis reaction. The synergistic effects between the two inlet modes were further explored and thus would affect the three-phase pyrolysis product distribution. The results showed that the spatial particle distribution and temperature distribution in the dense phase zone were becoming more uniform and the tar yield increased when the biomass inlet mode changed from single nozzle to double nozzles jetting opposite. Besides, when the nitrogen nozzle number was set as one and the auxiliary gas velocity was set as 0.15 m/s, much larger local circulation formed in the dense phase zone, meanwhile the particle volume fraction and temperature became more evenly distributed, which was conducive to the biomass pyrolysis process. The nitrogen inlet mode was found to show a greater impact on the tar yield compared to the biomass inlet mode. For single gas inlet mode, one biomass nozzle should be preferred for lower auxiliary gas velocity and the opposite double nozzle would be better for higher auxiliary gas velocity. The synergistic effects between biomass and nitrogen inlet modes were further summarized, which were found to have a positive impact on the biomass pyrolysis reaction characteristics. Based on the above conclusions, this work could provide a feasible theoretical guidance for designing fluidized bed pyrolysis reactor and optimizing the biomass pyrolysis process.

Comparison of linear and nonlinear function to describe and predict componential evolution of biomass pyrolysis vapors during condensation in a tubular indirect heat exchanger

Study on the Influence of Residence Time on the Componential Evolution of Biomass Pyrolysis Vapors During Indirect Heat Exchange Process Through a Combining Method of Bio-Oil Composition Inversion and Function Fitting

Experimental Study on the Composition Evolution and Selective Separation of Biomass Pyrolysis Vapors in the Four-Staged Indirect Heat Exchangers.

Heterogeneous Dynamic Behavior and Synergetic Evolution Mechanism of Internal Components and Released Gases during the Pyrolysis of Aquatic Biomass.

Numerical Investigation of Biomass Pyrolysis Performance in a Fluidized-Bed Reactor by a TFM-DEM Hybrid Model

Numerical Simulation and Multi-Process Coupling Analysis for Biomass Pyrolysis Fluidized Bed Reactor Based on Synergistic Effects Between Biomass and Nitrogen Inlet Modes

A transient coking model of hydrocarbon pyrolysis in hot pipe based on RPM analogy

Experimental research on non-azeotropic immiscible binary mixed vapors condensation mode and heat mass transfer characteristics under natural convection

Online Analysis Method for Pyrolysis Products with Large Volatility Difference at High Temperature and Pressure: Pyrolysis Kinetics of Supercritical Pressure N-Decane

Experimental Investigation on Coal Devolatilization at High Temperatures with Different Heating Rates

CFD simulation study of a biomass pellet-fuelled boiler

Experimental study on condensation flow patterns and heat transfer characteristics of non-azeotropic and immiscible binary mixed vapors

Design and Simulation of a Shell and Tube Heat Exchanger for a Pyrolysis Reactor

Applicability of bi-pseudo component separated-stage model for decomposition of lignocellulosic materials in air at multiple heating rates

Numerical study of the biomass pyrolysis process in a spouted bed reactor through computational fluid dynamics

Condition optimization of simulated bio-oil molecular distillation via response surface method

CFD-DEM Simulation of Biomass Pyrolysis in Fluidized-Bed Reactor with a Multistep Kinetic Scheme

Multiscale CFD Modeling of High-Temperature Biomass Pyrolysis with an Intraparticle Particle Model and Detailed Pyrolysis Kinetics

Finite element modeling of intraparticle heterogeneous tar conversion during pyrolysis of woody biomass particles

Thermogravimetric-infrared analysis and performance optimization of co-pyrolysis of oily sludge and rice husks

Lumping Strategy in Kinetic Modeling of Vacuum Pyrolysis of Plant Oil Asphalt