Abstract:Numerical simulation is essential for the prediction and evaluation of hydrocarbon reservoir performance. Numerical simulators developed for the description of the behavior of hydrates under production and the corresponding flow of fluids and heat accounting for all known processes are powerful, but they need validation through comparison to field or experimental data in order to instill confidence in their predictions. In this study, we analyze by means of numerical simulation the results of an experiment of methane hydrate dissociation by thermal stimulation in unconsolidated porous media heated through the vessel walls. The physics captured by the model include multicomponent heat and mass transfer, multiphase flow through porous media, and the phase behavior of the CH4 + H2O system involved in methane hydrate formation and dissociation. The set of governing equations consists of the mass and energy conservation equations coupled with constitutive relationships, i.e., the dissolution of gas in H2O, relative permeability and capillary pressure models, composite thermal conductivity models, and methane hydrate phase equilibria. The model geometry describes accurately the hydrate reactor used in a recent experimental study investigating methane hydrate dissociation behavior [Chong et. al. Appl. Energy 2016, 177, 409–421]. The cumulative gas production is estimated and validated against three tests of experimental data involving different boundary temperatures, showing a good agreement between observations and numerical predictions. The predicted evolution of the spatial distributions of different phases over time shows that hydrate dissociation progresses inward from the reactor boundary to the center, methane gas accumulates to the top of the reactor because of buoyancy, and water migrates down to the bottom of the reactor because of gravity. A sharp hydrate dissociation front is predicted, and the estimated location of hydrate dissociation front suggests a linear relationship with the square root of time. A sensitivity analysis on the thermal conductivity of sand under fully saturated conditions is conducted to elucidate its effect on the gas production behavior. In addition, the energy efficiency ratio computed from the simulation of this boundary-wall heating technique varies from 14.0 to 16.2. Deviations between observations and predictions of the evolution of the temperature profile are attributed to initial heterogeneous distribution of the hydrate phase in the hydrate reactor.

How well can damped shifted force Monte Carlo predict vapor–liquid equilibria for natural gas systems?

Decompression modelling of natural gas-hydrogen mixtures using the Peng-Robinson equation of state

Molecular dynamics predictions of transport properties for carbon dioxide hydrates under pre-nucleation conditions using TIP4P/Ice water and EPM2, TraPPE, and Zhang carbon dioxide potentials

All-Atom Molecular Dynamics of Pure Water–Methane Gas Hydrate Systems under Pre-Nucleation Conditions: A Direct Comparison between Experiments and Simulations of Transport Properties for the Tip4p/Ice Water Model

Molecular dynamics characterization of the interfacial structure and forces of the methane-ethane sII gas hydrate interface

Overview of Molecular Dynamics Simulation of Natural Gas Hydrate at Nanoscale

Accurate experimental ($p$, $ρ$, $T$) data of natural gas mixtures for the assessment of reference equations of state when dealing with hydrogen-enriched natural gas

Prediction of the Solubility and Gas-Liquid Equilibria for Gas-Water and Light Hydrocarbonwater Systems at High Temperatures and Pressures with a Group Contribution Equation of State

Numerical Analysis of Experiments on Thermally Induced Dissociation of Methane Hydrates in Porous Media

Prediction of the CH4-CO2 mixture properties using SAFT-VR Mie equation of state and molecular dynamics simulations

Coarse-grained models for fluids and their mixtures: Comparison of Monte Carlo studies of their phase behavior with perturbation theory and experiment

Calculation of gas solubility in the system MDEA-H2O-CO2-H2S

Prediction of Vapor−Liquid Equilibrium at High Pressure Using a New Excess Free Energy Mixing Rule Coupled with the Original UNIFAC Method and the SRK Equation of State

Molecular Dynamics Simulation and Theoretical Study on Heat Capacities of Supercritical H2O/CO2 Mixtures

Molecular simulation of natural gas transport and storage in shale rocks with heterogeneous nano-pore structures

Molecular dynamics simulation of the interfacial properties of methane-water and methane-brine systems

Simulations of vapor–liquid phase equilibrium and interfacial tension in the CO2–H2O–NaCl system

Numerical Modeling on Dissociation and Transportation of Natural Gas Hydrate Considering the Effects of the Geo-Stress

Integrating Molecular Dynamics Simulations and Experimental Data for Azeotrope Predictions in Binary Mixtures

A generalized equation of state for associating fluids in nanopores: Application to CO2-H2O, CH4-H2O, CO2-CH4, and CO2-CH4-H2O systems and implication for extracting dissolved CH4 by CO2 injection

Molecular Dynamics Simulation Study of the Diffusion of Carbon Dioxide in Heptane: Application in Natural Gas Cleaning