Ethics for editors.

Eldon R. Smith

IF: 6.614

2004-02-01

Canadian Journal of Cardiology

Abstract:

What problem does this paper attempt to address?

Resorcinol–formaldehyde resins as metal-free semiconductor photocatalysts for solar-to-hydrogen peroxide energy conversion

Yasuhiro Shiraishi,Takahiro Takii,Takumi Hagi,Shinnosuke Mori,Yusuke Kofuji,Yasutaka Kitagawa,Shunsuke Tanaka,Satoshi Ichikawa,Takayuki Hirai

DOI: https://doi.org/10.1038/s41563-019-0398-0

IF: 41.2

2019-07-01

Nature Materials

Abstract:Artificial photosynthesis is a critical challenge in moving towards a sustainable energy future. Photocatalytic generation of hydrogen peroxide from water and dioxygen (H2O + \(\frac{1}{2}\)O2 → H2O2, ΔG° = 117 kJ mol–1) by sunlight is a promising strategy for artificial photosynthesis because H2O2 is a storable and transportable fuel that can be used directly for electricity generation. All previously reported powder photocatalysts, however, have suffered from low efficiency in H2O2 generation. Here we report that resorcinol–formaldehyde resins, widely used inexpensive polymers, act as efficient semiconductor photocatalysts to provide a new basis for H2O2 generation. Simple high-temperature hydrothermal synthesis (~523 K) produces low-bandgap resorcinol–formaldehyde resins comprising π-conjugated and π-stacked benzenoid–quinoid donor–acceptor resorcinol couples. The resins absorb broad-wavelength light up to 700 nm and catalyse water oxidation and O2 reduction by the photogenerated charges. Simulated sunlight irradiation of the resins stably generates H2O2 with more than 0.5% solar-to-chemical conversion efficiency. Therefore, this metal-free system shows significant potential as a new artificial photosynthesis system.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter
Solar-to-H2 O2 Energy Conversion by the Photothermal Effect of a Polymeric Photocatalyst via a Two-Channel Pathway

Wei Liu,Run Xu,Weifeng Pan,Chao Li,Niu Huang,Yingping Huang,Liqun Ye

DOI: https://doi.org/10.1002/cssc.202300015

IF: 8.4

2023-06-22

ChemSusChem

Abstract:With a view to using solar energy, the exploitation of near-infrared (NIR) light, which constitutes about 50 % of solar energy, in photocatalytic H2 O2 synthesis remains challenging. In this study, resorcinol-formaldehyde (RF), which has a relatively low bandgap and high conductivity, is introduced for photothermal catalytic generation of H2 O2 under ambient conditions. Owing to the promoted surface charge transfer rate under high temperature, the photosynthetic yield reaches roughly 2000 μm within 40 min under 400 mW cm-2 irradiation with a solar-to-chemical conversion (SCC) efficiency of up to 0.19 % at 338 K under ambient conditions, exceeding the rate of photocatalysis with a cooling system by a factor of about 2.5. Notably, the H2 O2 produced by RF during photothermal process was formed via a two-channel pathway, leading to the overall promotion of H2 O2 formation. The resultant H2 O2 can be applied in situ for pollutant removal. This work offers a sustainable and economical route for the efficient formation of H2 O2 .
3‐Hydroxythiophenol‐Formaldehyde Resin Microspheres Modulated by Sulfhydryl Groups for Highly Efficient Photocatalytic Synthesis of H2O2

Yulu Xu,Xia Hu,Yuyuan Chen,Sijie Lin,Chen Wang,Faliang Gou,Xiaogang Yang,Weiwei Zheng,De‐Kun Ma

DOI: https://doi.org/10.1002/advs.202304948

IF: 15.1

2023-12-11

Advanced Science

Abstract:A "kill three birds with a stone" strategy is reported, namely, the replacement of resorcinol with 3‐hydroxythiophenol can lead to stronger built‐in electric field, better adsorption ability to O2 molecules, and increased surface catalytic activity. As a result, H2O2 production rate for 3‐HTPF microspheres is 3.4 times larger than that obtained on RF submicrospheres. Resorcinol‐formaldehyde (RF) resin represents a promising visible‐light responding photocatalyst for oxygen reduction reaction (ORR) toward H2O2 production. However, its photocatalytic ORR activity toward H2O2 generation is still unsatisfied for practical application. Herein, 3‐hydroxythiophenol‐formaldehyde (3‐HTPF) resin microspheres synthesized through polycondensation reaction between 3‐HTP and formaldehyde at room temperature and subsequent hydrothermal treatment exhibit enhanced photocatalytic ORR activity is reported. The experimental results show that the partial substitution of hydroxy group (─OH) by sulfhydryl one (─SH) through using 3‐HTP to replace resorcinol could slow the rates of nucleation and growth of the resin particles and lead to strongly π‐stacked architecture in 3‐HTPF. The introduction of ─SH group can also improve adsorption ability of 3‐HTPF to O2 molecules and enhance ORR catalytic activity of the photocatalysts. Stronger built‐in electric field, better adsorption ability to O2 molecules, and increased surface catalytic activity collectively boost photocatalytic activity of 3‐HTPF microspheres. As a result, H2O2 production rate of 2010 μm h−1 is achieved over 3‐HTPF microspheres at 273 K, which is 3.4 times larger than that obtained using RF submicrospheres (591 μm h−1). The rational substituent group modulation provides a new strategy for designing polymeric photocatalysts at the molecular level toward high‐efficiency artificial photosynthesis.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
Resorcinol–Formaldehyde/TiO2 Polymer Composites: Efficient Photocatalysts for Water Oxidation to Hydrogen Peroxide

Iswar Chandra Mondal,Addisalem Abebe,Ravinder Kaushik,Sunil Kumar,Subrata Ghosh,Aditi Halder

DOI: https://doi.org/10.26434/chemrxiv-2024-8hcwc

2024-11-08

Abstract:Given its multi-faceted important roles such as aqueous oxidant, chemical platform for environmental remediation, possible liquid fuel and so on, environment friendly approaches to produce hydrogen peroxide (H2O2) are highly desirable. In this context, the photocatalytic generation of hydrogen peroxide (H2O2) from water oxidation has emerged as a promising method, and phenol-formaldehyde based functional resins have been established to be an excellent platform for developing photocatalyst for water oxidation. The present work reports the development of resorcinol−formaldehyde (RF)-TiO2 composites (RF/TiO2) as efficient heterogenous platform for photocatalytic production of H2O2 through water oxidation. The synthesis of RF/TiO2 was accomplished following a simple high-temperature hydrothermal method, and it was characterized to study its microstructures and optical properties. The role of optimum amount of TiO2 in RF/TiO2 composites in improving the photocatalytic activity of resorcinol-formaldehyde resin was established by developing RF/TiO2 composites with varied amount of TiO2. As experimentally established, the RF/TiO2 composites prepared with 1.1-1.6 % (w/w) feed of TiO2 with respect to resorcinol at a temperature of 200 oC under hydrothermal condition was found to be the most efficient ones for the present study. Out of these composites, RF/TiO2-1.2% and RF/TiO2-1.3% resulted in the production of ~ 500 and ~530 µmol of H2O2 per gram of catalyst, respectively, upon 5 h of continuous photoirradiation under the present experimental condition with reaction temperature of ~30-35 ℃. It was observed that the H2O2 production rate can be enhanced by increasing the reaction temperature.

Chemistry
Resorcinol‐Phthalaldehyde Resins for Photosynthesis of Hydrogen Peroxide: Modulation of Electronic Structure and Integration of Dual Channel Pathway

Zhong Chen,Chengcheng Chu,Ducheng Yao,Qiuju Li,Shun Mao

DOI: https://doi.org/10.1002/adfm.202400506

IF: 19

2024-05-10

Advanced Functional Materials

Abstract:A π spacer is elaborately introduced into resorcinol‐p‐phthalaldehyde resins to increase the separation distance of electrons and holes for enhanced charge separation. The D‐π‐A structure endows RP resins with outstanding photocatalytic H2O2 production via integration of oxygen reduction reaction and water oxidation reaction pathways. Modulating of electronic structure of photocatalyst and integration of dual channel pathway are promising strategy for efficient photosynthesis of hydrogen peroxide (H2O2) from pure water without sacrificial agent and oxygen exposure. In this work, nontoxic aromatic dialdehyde is used to replace the commonly used toxic formaldehyde to form resorcinol‐phthalaldehyde resins through a hydrothermal method. The introducing of aromatic ring as π spacer increases the separation distance of electrons and holes to avoid their recombination. H2O2 can be produced via integrated oxygen reduction reaction (ORR) and water oxidation reaction (WOR) due to the suitable energy band positions and spatially separated reaction sites. Resorcinol‐p‐phthalaldehyde (RP) resin exhibits a promising H2O2 yield of 3351 μmol g−1 h−1 with high apparent quantum yield (AQY) of 14.9% at 420 nm and solar‐to‐chemical conversion (SCC) efficiency of 1.54%. This work provides a simple strategy to modulate the charge separation efficiency and redox reaction pathway on photocatalyst at molecular level design.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Molecular Level Modulation of Anthraquinone‐containing Resorcinol‐formaldehyde Resin Photocatalysts for H2O2 Production with Exceeding 1.2 % Efficiency

Chen Zhao,Xinyao Wang,Yanfeng Yin,Wenming Tian,Guang Zeng,Haitao Li,Sheng Ye,Limin Wu,Jian Liu

DOI: https://doi.org/10.1002/anie.202218318

2022-01-01

Angewandte Chemie International Edition

Abstract:Designing polymeric photocatalysts at the molecular level to modulate the photogenerated charge behavior is a promising and challenging strategy for efficient hydrogen peroxide (H2O2) photosynthesis. Here, we introduce electron-deficient 1,4-dihydroxyanthraquinone (DHAQ) into the framework of resorcinol-formaldehyde (RF) resin, which modulates the donor/acceptor ratio from the perspective of molecular design for promoting the charge separation. Interestingly, H2O2 can be produced via oxygen reduction and water oxidation pathways, verified by isotopic labeling and in situ characterization techniques. Density functional theory (DFT) calculations elucidate that DHAQ can reduce the energy barrier for H2O2 production. RF-DHAQ exhibits excellent overall photosynthesis of H2O2 with a solar-to-chemical conversion (SCC) efficiency exceeding 1.2%. This work opens a new avenue to design polymeric photocatalysts at the molecular level for high-efficiency artificial photosynthesis.
Exceptional Photocatalytic Hydrogen Peroxide Production from Sandwich‐Structured Graphene Interlayered Phenolic Resins Nanosheets with Mesoporous Channels

Qiang Tian,Xiang‐Kang Zeng,Chen Zhao,Ling‐Yan Jing,Xi‐Wang Zhang,Jian Liu

DOI: https://doi.org/10.1002/adfm.202213173

IF: 19

2023-02-28

Advanced Functional Materials

Abstract:The sandwich‐structured nanosheets based on graphene and mesoporous phenolic resin are designed with a record‐breaking conversion efficiency of 1.23% from solar energy to hydrogen peroxide chemical energy. The unique sandwich‐structure and mesoporous channels promote electron transport, increase two‐electron reaction selectivity, and improve mass transfer properties. Harnessing solar energy to produce hydrogen peroxide (H2O2) from water (H2O) and dioxygen (O2) via artificial photosynthesis is an attractive route. To achieve high solar‐to‐H2O2 conversion efficiency, herein, an interfacial self‐assembly strategy is adopted to pattern mesoporous resorcinol‐formaldehyde resin (MRF) onto reduced graphene oxide (rGO) to form sandwich‐structured rGO@MRF polymeric photocatalysts. The internal graphene layer that mimics the electron transport chain of plant leaf, can effectively transfer electrons, and promote the two‐electron reduction of O2. Moreover, the mesoporous channels mimic the stomata, beneficially boost the fluid velocity, enrichment of O2, and diffusion of H2O2. Consequently, the developed metal‐free material can achieve an exceptional solar‐to‐chemical energy conversion efficiency of 1.23%. This ingenious interface engineering brings new opportunities for the design of efficient artificial photocatalysts.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Construction of Conjugated Organic Polymers for Efficient Photocatalytic Hydrogen Peroxide Generation with Adequate Utilization of Water Oxidation

Qinzhe Liu,Yuyan Huang,Yu-xin Ye

DOI: https://doi.org/10.3390/ma17112709

IF: 3.4

2024-06-04

Materials

Abstract:The visible-light-driven photocatalytic production of hydrogen peroxide (H2O2) is currently an emerging approach for transforming solar energy into chemical energy. In general, the photocatalytic process for producing H2O2 includes two pathways: the water oxidation reaction (WOR) and the oxygen reduction reaction (ORR). However, the utilization efficiency of ORR surpasses that of WOR, leading to a discrepancy with the low oxygen levels in natural water and thereby impeding their practical application. Herein, we report a novel donor–bridge–acceptor (D-B-A) organic polymer conjugated by the Sonogashira–Hagihara coupling reaction with tetraphenylethene (TPE) units as the electron donors, acetylene (A) as the connectors and pyrene (P) moieties as the electron acceptors. Notably, the resulting TPE-A-P exhibits a remarkable solar-to-chemical conversion of 1.65% and a high BET-specific surface area (1132 m2·g−1). Furthermore, even under anaerobic conditions, it demonstrates an impressive H2O2 photosynthetic efficiency of 1770 μmol g−1 h−1, exceeding the vast majority of previously reported photosynthetic systems of H2O2. The outstanding performance is attributed to the effective separation of electrons and holes, along with the presence of sufficient reaction sites facilitated by the incorporation of alkynyl electronic bridges. This protocol presents a successful method for generating H2O2 via a water oxidation reaction, signifying a significant advancement towards practical applications in the natural environment.

materials science, multidisciplinary,metallurgy & metallurgical engineering,physics, applied,chemistry, physical, condensed matter
H2O2 Generation from O2 and H2O on a Near-Infrared Absorbing Porphyrin Supramolecular Photocatalyst

Yaning Zhang,Chengsi Pan,Gaoming Bian,Jing Xu,Yuming Dong,Ying Zhang,Yang Lou,Weixu Liu,Yongfa Zhu

DOI: https://doi.org/10.1038/s41560-023-01218-7

IF: 56.7

2023-01-01

Nature Energy

Abstract:Hydrogen peroxide (H 2 O 2 ) is an important industrial chemical and also a possible energy carrier. Photocatalytic synthesis of H 2 O 2 is an attractive alternative to the anthraquinone process, but current catalyst systems suffer from many problems including: a limited sunlight wavelength response, the need for sacrificial reagents and insufficient activity. Here we report self-assembled tetrakis(4-carboxyphenyl)porphyrin supramolecular photocatalysts that produce H 2 O 2 from only H 2 O and O 2 and with a quantum efficiency of 14.9% at 420 nm and 1.1% at 940 nm. The catalyst achieves a solar-to-chemical conversion efficiency of 1.2% at 328 K when irradiated and heated with simulated sunlight. Our results suggest that photogenerated electrons and holes contribute to H 2 O 2 production by reacting on different active sites including pyrrole N–H ring and carboxyl groups. In particular, we propose a hole-induced H 2 O 2 production process, which involves the photoconversion of -COOH to -CO 3 H groups on the catalyst, followed by thermal decomposition.
A Full-Spectrum Metal-Free Porphyrin Supramolecular Photocatalyst for Dual Functions of Highly Efficient Hydrogen and Oxygen Evolution.

Zijian Zhang,Yongfa Zhu,Xianjie Chen,Hanjie Zhang,Jun Wang

DOI: https://doi.org/10.1002/adma.201806626

IF: 29.4

2019-01-01

Advanced Materials

Abstract:A full-spectrum (300-700 nm) responsive porphyrin supramolecular photocatalyst with a theoretical solar spectrum efficiency of 44.4% is successfully constructed. For the first time, hydrogen and oxygen evolution (40.8 and 36.1 mu mol g(-1) h(-1)) is demonstrated by a porphyrin photocatalyst without the addition of any cocatalysts. The strong oxidizing performance also presents an efficient photodegradation activity that is more than ten times higher than that of g-C3N4 for the photodegradation of phenol. The high photocatalytic reduction and oxidation activity arises from a strong built-in electric field due to molecular dipoles of electron-trapping groups and the nanocrystalline structure of the supramolecular photocatalyst. The appropriate band structure of the supramolecular photocatalyst adjusted via the highest occupied molecular orbital and lowest unoccupied molecular orbital energy levels of the porphyrin gives rise to thermodynamic driving potential for H-2 and O-2 evolution under visible light irradiation. Controlling the energy band structure of photocatalysts via the ordered assembly of structure-designed organic molecules could provide a novel approach for the design of organic photocatalysts in energy and environmental applications.
A photocatalytic redox cycle over a polyimide catalyst drives efficient solar-to-H2O2 conversion

Wenwen Chi,Yuming Dong,Bing Liu,Chengsi Pan,Jiawei Zhang,Hui Zhao,Yongfa Zhu,Zeyu Liu

DOI: https://doi.org/10.1038/s41467-024-49663-6

2024-06-22

Abstract:Circumventing the conventional two-electron oxygen reduction pathway remains a great problem in enhancing the efficiency of H2O2 photosynthesis. A promising approach to achieve outstanding photocatalytic activity involves the utilization of redox intermediates. Here, we engineer a polyimide aerogel photocatalyst with photoreductive carbonyl groups for non-sacrificial H2O2 production. Under photoexcitation, carbonyl groups on the photocatalyst surface are reduced, forming an anion radical intermediate. The produced intermediate is oxidized by O2 to produce H2O2 and subsequently restores the carbonyl group. The high catalytic efficiency is ascribed to a photocatalytic redox cycle mediated by the radical anion, which not only promotes oxygen adsorption but also lowers the energy barrier of O2 reduction reaction for H2O2 generation. An apparent quantum yield of 14.28% at 420 ± 10 nm with a solar-to-chemical conversion efficiency of 0.92% is achieved. Moreover, we demonstrate that a mere 0.5 m2 self-supported polyimide aerogel exposed to natural sunlight for 6 h yields significant H2O2 production of 34.3 mmol m-2.
Linear Conjugated Polymers for Solar-Driven Hydrogen Peroxide Production: The Importance of Catalyst Stability

Lunjie Liu,Mei-Yan Gao,Haofan Yang,Xiaoyan Wang,Xiaobo Li,Andrew I. Cooper

DOI: https://doi.org/10.1021/jacs.1c09979

IF: 15

2021-11-10

Journal of the American Chemical Society

Abstract:Hydrogen peroxide (H2O2) is one of the most important industrial oxidants. In principle, photocatalytic H2O2 synthesis from oxygen and H2O using sunlight could provide a cleaner alternative route to the current anthraquinone process. Recently, conjugated organic materials have been studied as photocatalysts for solar fuels synthesis because they offer synthetic tunability over a large chemical space. Here, we used high-throughput experiments to discover a linear conjugated polymer, poly(3-4-ethynylphenyl)ethynyl)pyridine (DE7), which exhibits efficient photocatalytic H2O2 production from H2O and O2 under visible light illumination for periods of up to 10 h or so. The apparent quantum yield was 8.7% at 420 nm. Mechanistic investigations showed that the H2O2 was produced via the photoinduced stepwise reduction of O2. At longer photolysis times, however, this catalyst decomposed, suggesting a need to focus the photostability of organic photocatalysts, as well as the initial catalytic production rates.

chemistry, multidisciplinary
Graphene Quantum Dots‐Modified Resorcinol‐Formaldehyde Resin for Efficient Hydrogen Peroxide Production

Chen Zhao,Xinyao Wang,Sheng Ye,Jian Liu

DOI: https://doi.org/10.1002/solr.202200427

IF: 9.1726

2022-01-01

Solar RRL

Abstract:Photocatalytic production of hydrogen peroxide (H2O2) with water and oxygen as clean source is considered to be a sustainable strategy. Resorcinol‐formaldehyde (RF) resin has attracted much attention as a promising polymeric photocatalyst, but the inefficient charge transfer restricts its corresponding photocatalytic efficiency. Herein, the design and synthesis of graphene quantum dots (GQDs) modified RF (RF‐GQDs) composite via freeze‐drying method are reported. The improvment of the RF‐GQDs composite charge separation efficiency is achieved through the combination electrostatic interaction between GQDs and RF, thus greatly enhancing photocatalytic performance. The optimal RF‐GQDs display the best photocatalytic H2O2 production activity of 2.45 mmol h−1 g−1, which is 5.1 times that of bare RF (0.48 mmol h−1 g−1). This work might contribute to a new way for the development of RF‐based ploymeric photocatalysts for efficient photocatalytic H2O2 production.
A metal-free photocatalyst for highly efficient hydrogen peroxide photoproduction in real seawater

Qingyao Wu,Jingjing Cao,Xiao Wang,Yan Liu,Yajie Zhao,Hui Wang,Yang Liu,Hui Huang,Fan Liao,Mingwang Shao,Zhenghui Kang

DOI: https://doi.org/10.1038/s41467-020-20823-8

IF: 16.6

2021-01-20

Nature Communications

Abstract:Abstract Artificial photosynthesis of H 2 O 2 from H 2 O and O 2 , as a spotless method, has aroused widespread interest. Up to date, most photocatalysts still suffer from serious salt-deactivated effects with huge consumption of photogenerated charges, which severely limit their wide application. Herein, by using a phenolic condensation approach, carbon dots, organic dye molecule procyanidins and 4-methoxybenzaldehyde are composed into a metal-free photocatalyst for the photosynthetic production of H 2 O 2 in seawater. This catalyst exhibits high photocatalytic ability to produce H 2 O 2 with the yield of 1776 μmol g −1 h −1 ( λ ≥ 420 nm; 34.8 mW cm −2 ) in real seawater, about 4.8 times higher than the pure polymer. Combining with in-situ photoelectrochemical and transient photovoltage analysis, the active site and the catalytic mechanism of this composite catalyst in seawater are also clearly clarified. This work opens up an avenue for a highly efficient and practical, available catalyst for H 2 O 2 photoproduction in real seawater.

multidisciplinary sciences
Hydrogenated TiO2/SrTiO3 porous microspheres with tunable band structure for solar-light photocatalytic H2 and O2 evolution

Taoran Han,Yajie Chen,Guohui Tian,Wei Zhou,Yuting Xiao,Jinxin Li,Honggang Fu

DOI: https://doi.org/10.1007/s40843-016-5126-1

2016-11-29

Science China Materials

Abstract:The production of H2 and O2 from solar-light photocatalytic water splitting has attracted significant research attention as a clean and renewable source of energy. In this study, hydrogenated TiO2/SrTiO3 porous microspheres were prepared as a high-performance photocatalyst. Titanium glycerolate and then strontium complex precursors were first prepared via a two-step solvothermal process, then, after calcination in air and subsequent H2/Ar reduction treatments, hydrogenated TiO2/SrTiO3 porous microspheres with controllable defects and band positions were prepared. Several characterization techniques were used to demonstrate that the catalyst heterostructures, the oxygen-vacancy content, and the unique porous structures synergistically enhanced the visible-light harvesting abilities and photogenerated charge separation, and resulted in improved photocatalytic efficiency for H2 and O2 evolution. As expected, the optimum treatment conditions provided hydrogenated TiO2/SrTiO3 porous microspheres that showed excellent photocatalytic activity with H2 and O2 evolution rates of 239.97 and 103.79 μmol h−1 (50 mg catalyst, under AM 1.5 irradiation), respectively, which were ca. 5.9 and 6.6 times higher, respectively, than those of solid TiO2/SrTiO3 materials. Thus, this type of hydrogenated TiO2/SrTiO3 porous microsphere catalyst shows great potential as a photocatalyst for solar-energy conversion applications.

materials science, multidisciplinary
Efficient Hydrogen Production by a Photoredox Cascade Catalyst Comprising Dual Photosensitizers and a Transparent Electron Mediator

Nobutaka Yoshimura,Masaki Yoshida,Atsushi Kobayashi

DOI: https://doi.org/10.1021/jacs.2c13687

IF: 15

2023-03-14

Journal of the American Chemical Society

Abstract:One-directional electron transport between a photocatalyst and redox mediator is crucial for achieving highly active Z-scheme water-splitting photocatalysis. Herein, a photoredox cascade catalyst that artificially mimics the electron transport chain in natural photosynthesis was synthesized from a Pt-TiO(2) nanoparticle catalyst, two photosensitizers (RuCP^(6) and RuP^(6)), and a visible-light-transparent electron mediator (HCRu). During photocatalytic hydrogen evolution in the presence of a...

chemistry, multidisciplinary
Solid Acids Accelerate the Photocatalytic Hydrogen Peroxide Synthesis over a Hybrid Catalyst of Titania Nanotube with Carbon Dot

Runyuan Ma,Liang Wang,Hai Wang,Ziyu Liu,Mingyang Xing,Longfeng Zhu,Xiangju Meng,Feng-Shou Xiao

DOI: https://doi.org/10.1016/j.apcatb.2018.11.087

2019-01-01

Abstract:Photocatalytic synthesis of hydrogen peroxide (H2O2) from water and oxygen is an alternative route for clean energy storage and chemical synthesis, but still having problems with insufficient H2O2 productivity and solar-to-chemical energy conversion efficiency. Herein, we reported a hybrid catalyst of proton-form titania nanotube with carbon dot (HTNT-CD) that is highly efficient for the production of H2O2 under visible-light irradiation (lambda > 420 nm, H2O2 productivity at 3.42 mmol g(cat)(-1).h(-1)), outperforming the titania catalysts containing noble metals and the carbon nitride catalysts reported previously. Multiple studies demonstrate that the protons on the HTNT-CD are crucial for the production of H2O2 by efficiently accelerating the half reaction of molecular oxygen reduction to form H2O2, and effectively hindering H2O2 decomposition under the irradiation conditions. This HTNT-CD catalyst gives solar-to-H(2)o(2) apparent energy conversion efficiency at 5.2%, which is even 4.9 times of that (1.06%) over the catalyst derived from commercial P25 and CDs. More importantly, the HTNT-CD is stable, giving high H2O2 productivity in the continuous recycle tests.
Hydrophobic covalent organic frameworks utilized Fluorocarbon/Water system for efficient hydrogen peroxide photosynthesis

Minghui Sun,Muthu Murugananthan,Zhiming Zhou,Yan Shen,Yanrong Zhang,Xiaoguang Wang

DOI: https://doi.org/10.1016/j.cej.2024.150245

IF: 15.1

2024-03-10

Chemical Engineering Journal

Abstract:Great efforts have been made for H 2 O 2 production by an artificial photosynthetic approach. However, the poor solubility of oxygen in the liquid phase, sluggish mass transfer, and additional concentration step to produce H 2 O 2 have limited the development of this technology. Herein, a unique fluorocarbon/hydrophobic photocatalysts/water system is reported, which ensures an efficient photosynthesis and spontaneous self-separation of H 2 O 2. The presence of an ultra-thin dense gas layer between the perfluorous solvent and the photocatalysts enables rapid oxygen supply through a nano-confinement effect. Thus, a maximum photosynthetic efficiency of 4.9 mM g −1 h −1 of H 2 O 2 is achieved, 6 times higher compared to its counterpart gas–liquid-solid triphase system. Importantly, the independent hierarchical structure of the present system, allows functional applications, such as the Fenton reaction using pre-added Fe 2+ in the aqueous solution. This feature makes the fluorocarbon/water systems is an advantageous one and of extraordinary significance for similar types of gas–liquid reactions.

engineering, chemical, environmental
Enhancing Photosynthesis Efficiency of Hydrogen Peroxide by Modulating Side Chains to Facilitate Water Oxidation at Low-Energy Barrier Sites

Huijie Yan,Yuan Peng,Yuyan Huang,Minhui Shen,Xiaoqian Wei,Weixin Zou,Qing Tong,Ningbo Zhou,Jianqiao Xu,Yuxia Zhang,Yu-Xin Ye,Gangfeng Ouyang

DOI: https://doi.org/10.1002/adma.202311535

Abstract:Hydrogen peroxide (H2O2) is a crucial oxidant in advanced oxidation processes. In situ, photosynthesis of it in natural water holds the promise of practical application for water remediation. However, current photosynthesis of H2O2 systems primarily relies on oxygen reduction, leading to limited performance in natural water with low dissolved oxygen or anaerobic conditions found in polluted water. Herein, a novel photocatalyst based on conjugated polymers with alternating electron donor-acceptor structures and electron-withdrawing side chains on electron donors is introduced. Specifically, carbazole functions as the electron donor, triazine serves as the electron acceptor, and cyano acts as the electron-withdrawing side chain. Notably, the photocatalyst exhibits a remarkable solar-to-chemical conversion of 0.64%, the highest reported in natural water. Furthermore, even in anaerobic conditions, it achieves an impressive H2O2 photosynthetic efficiency of 1365 µmol g-1 h-1, surpassing all the reported photosynthetic systems of H2O2. This remarkable improvement is attributed to the effective relocation of the water oxidation active site from a high-energy carbazole to a low-energy acetylene site mediated by the side chains, resulting in enhanced O2 or H2O2 generation from water. This breakthrough offers a new avenue for efficient water remediation using advanced oxidation technologies in oxygen-limited environments, holding significant implications for environmental restoration.
Efficient photocatalytic production of hydrogen peroxide using dispersible and photoactive porous polymers

Shengdong Wang,Zhipeng Xie,Da Zhu,Shuai Fu,Yishi Wu,Hongling Yu,Chuangye Lu,Panke Zhou,Mischa Bonn,Hai I. Wang,Qing Liao,Hong Xu,Xiong Chen,Cheng Gu

DOI: https://doi.org/10.1038/s41467-023-42720-6

IF: 16.6

2023-10-28

Nature Communications

Abstract:Developing efficient artificial photocatalysts for the biomimetic photocatalytic production of molecular materials, including medicines and clean energy carriers, remains a fundamentally and technologically essential challenge. Hydrogen peroxide is widely used in chemical synthesis, medical disinfection, and clean energy. However, the current industrial production, predominantly by anthraquinone oxidation, suffers from hefty energy penalties and toxic byproducts. Herein, we report the efficient photocatalytic production of hydrogen peroxide by protonation-induced dispersible porous polymers with good charge-carrier transport properties. Significant photocatalytic hydrogen peroxide generation occurs under ambient conditions at an unprecedented rate of 23.7 mmol g –1 h –1 and an apparent quantum efficiency of 11.3% at 450 nm. Combined simulations and spectroscopies indicate that sub-picosecond ultrafast electron "localization" from both free carriers and exciton states at the catalytic reaction centers underlie the remarkable photocatalytic performance of the dispersible porous polymers.

multidisciplinary sciences

Ethics for editors.

Resorcinol–formaldehyde resins as metal-free semiconductor photocatalysts for solar-to-hydrogen peroxide energy conversion

Solar-to-H2 O2 Energy Conversion by the Photothermal Effect of a Polymeric Photocatalyst via a Two-Channel Pathway

3‐Hydroxythiophenol‐Formaldehyde Resin Microspheres Modulated by Sulfhydryl Groups for Highly Efficient Photocatalytic Synthesis of H2O2

Resorcinol–Formaldehyde/TiO2 Polymer Composites: Efficient Photocatalysts for Water Oxidation to Hydrogen Peroxide

Resorcinol‐Phthalaldehyde Resins for Photosynthesis of Hydrogen Peroxide: Modulation of Electronic Structure and Integration of Dual Channel Pathway

Molecular Level Modulation of Anthraquinone‐containing Resorcinol‐formaldehyde Resin Photocatalysts for H2O2 Production with Exceeding 1.2 % Efficiency

Exceptional Photocatalytic Hydrogen Peroxide Production from Sandwich‐Structured Graphene Interlayered Phenolic Resins Nanosheets with Mesoporous Channels

Construction of Conjugated Organic Polymers for Efficient Photocatalytic Hydrogen Peroxide Generation with Adequate Utilization of Water Oxidation

H2O2 Generation from O2 and H2O on a Near-Infrared Absorbing Porphyrin Supramolecular Photocatalyst

A Full-Spectrum Metal-Free Porphyrin Supramolecular Photocatalyst for Dual Functions of Highly Efficient Hydrogen and Oxygen Evolution.

A photocatalytic redox cycle over a polyimide catalyst drives efficient solar-to-H2O2 conversion

Linear Conjugated Polymers for Solar-Driven Hydrogen Peroxide Production: The Importance of Catalyst Stability

Graphene Quantum Dots‐Modified Resorcinol‐Formaldehyde Resin for Efficient Hydrogen Peroxide Production

A metal-free photocatalyst for highly efficient hydrogen peroxide photoproduction in real seawater

Hydrogenated TiO2/SrTiO3 porous microspheres with tunable band structure for solar-light photocatalytic H2 and O2 evolution

Efficient Hydrogen Production by a Photoredox Cascade Catalyst Comprising Dual Photosensitizers and a Transparent Electron Mediator

Solid Acids Accelerate the Photocatalytic Hydrogen Peroxide Synthesis over a Hybrid Catalyst of Titania Nanotube with Carbon Dot

Hydrophobic covalent organic frameworks utilized Fluorocarbon/Water system for efficient hydrogen peroxide photosynthesis

Enhancing Photosynthesis Efficiency of Hydrogen Peroxide by Modulating Side Chains to Facilitate Water Oxidation at Low-Energy Barrier Sites

Efficient photocatalytic production of hydrogen peroxide using dispersible and photoactive porous polymers