Antidepressants, rhinosinusitis are topics of new AHCPR evidence reports.

J. Miller

DOI: https://doi.org/10.1093/AJHP/56.9.853

1999-05-01

American Journal of Health-System Pharmacy

Abstract:

What problem does this paper attempt to address?

Tunable triple Fano resonance in MIM waveguide system with split ring resonator

Xuebo Liu,Qian Yang,Kexue Peng,Baohua Zhang,Haineng Bai,Xin Li,Yang Tan,Zheng Zhang,Fuqiang Guo

DOI: https://doi.org/10.1007/s11082-021-02994-w

IF: 3

2021-07-22

Optical and Quantum Electronics

Abstract:A plasmonic refractive index nanosensor based on Fano resonance was designed, the excellent performance of the structure was numerically achieved. The system consists of a metal–insulator-metal (MIM) waveguide with two silver baffles and a coupled split ring resonator (SRR), and the finite-difference time-domain (FDTD) method was utilized to study the transmission characteristics of the structure. The results show that the designed structure can excite the triple Fano resonance phenomenon. For a positive SRR structure, the transmission peak can be tuned vertically and horizontally by adjusting the structural parameters. Furthermore, the sensitivity of nanosensors can reach 1034 nm/RIU, and the maximum figure of merit (FOM) is 7.01 × 104. Interestingly, the improved symmetrical SRR structure demonstrated that the sensitivity is as high as 1053 nm/RIU, and the maximum FOM value was 1.82 × 105. High performance and good controllability can provide a new possibility for the design and optimization of nanosensor.

engineering, electrical & electronic,optics,quantum science & technology
Sensing Features of the Fano Resonance in an MIM Waveguide Coupled with an Elliptical Ring Resonant Cavity

Hao Su,Shubin Yan,Xiaoyu Yang,Jing Guo,Jinxi Wang,Ertian Hua

DOI: https://doi.org/10.3390/app10155096

2020-01-01

Applied Sciences

Abstract:In this article, a novel refractive index sensor composed of a metal–insulator–metal (MIM) waveguide with two rectangular stubs coupled with an elliptical ring resonator is proposed, the geometric parameters of which are controlled at a few hundreds of nanometer size. The transmission feature of the structure was studied by the finite element method based on electronic design automation (EDA) software COMSOL Multiphysics 5.4 (Stockholm, Sweden). The rectangular stub resonator can be thought of as a Fabry–Perot (FP) cavity, which can facilitate the Fano resonance. The simulation results reveal that the structure has a symmetric Lorentzian resonance, as well as an ultrasharp and asymmetrical Fano resonance. By adjusting the geometrical parameters, the sensitivity and figure of merit (FOM) of the structure can be optimized flexibly. After adjustments and optimization, the maximum sensitivity can reach up to 1550 nm/RIU (nanometer/Refractive Index Unit) and its FOM is 43.05. This structure presented in this article also has a promising application in highly integrated medical optical sensors to detect the concentration of hemoglobin and monitor body health.
Optical Sensing Based on Multimode Fano Resonances in Metal-Insulator-metal Waveguide Systems with X-shaped Resonant Cavities.

Jina Li,Jianfeng Chen,Xing Liu,He Tian,Jinfang Wang,Jingang Cui,Siti Rohimah

DOI: https://doi.org/10.1364/ao.427862

IF: 1.9

2021-01-01

Applied Optics

Abstract:A plasmonic metal-insulator-metal (MIM) waveguide system is proposed, which is composed of a symmetrical X-shaped resonant cavity and a bus waveguide with a baffle, and its Fano resonance and optical sensing characteristics are investigated by using the finite element method (FEM). The results show that the system allows easy implementation of up to four Fano resonances, and the maximum refractive index sensitivity and figure of merit are 1303 nm/RIU and 3113, respectively. The influences of the geometric parameters of the system on the Fano resonances are also investigated, and further the independent adjustments of the Fano resonance line shape and wavelength are realized. Moreover, when an additional X-shaped resonant cavity is added to the system, more ultrasharp Fano resonances with considerable performances are obtained, which may enhance the parallel processing capability of the system. The proposed plasmonic MIM waveguide system may have potential applications in integrated photonic devices and nanoscale optical sensing.
Novel SPR Sensor Based on MIM-based Waveguide and an Asymmetric Cross-shaped Resonator

Su Chang,Zhu Jun

DOI: https://doi.org/10.1007/s11468-020-01348-8

IF: 2.726

2021-01-01

Plasmonics

Abstract:In recent years, sensing structures based on Fano resonances have become a hot research topic. In this study, a coupled structure, composed of a metal baffle metal-insulator-metal waveguide and an asymmetric cross-shaped resonator, is designed. By changing the coupling distance and asymmetry of the cross-shaped resonator, their influences on the transmission and electromagnetic field distribution were calculated and systematically analyzed. The results showed a good linear relationship between the center wavelength of the Fano transmission peak and the refractive index of the filled material. The sensor sensitivity can reach 795 nm/RIU. The prospective applications of this waveguide structure are promising. The structure can also provide a future reference for the design of a microwave waveguide structure.
Multiple Fano resonances by MIM waveguide coupling whispering gallery mode resonator and application in Refractive index sensing

Jiayao Gao,Xiangxian Wang,Yizhen Chen,Tianshan Chen,Yunping Qi,Hua Yang,Xiaoping Zheng

DOI: https://doi.org/10.1088/1402-4896/ad3d99

2024-04-12

Physica Scripta

Abstract:In this study, a baffled metal – insulator – metal (MIM) waveguide coupled with a whispering gallery mode resonator (WGMR) is proposed. This structure could excite quadruple Fano resonances. The asymmetric Fano resonance transmittance spectrum and the electric field at the resonance peak were numerically simulated using the finite difference time domain method. The obtained data were fitted using the multimode interference coupled mode theory. The number of Fano resonance peaks was tuned by the outer radius of the WGMR. With other geometric parameters unchanged, the number of Fano resonance peaks increased with increasing outer radius of the WGMR. When the ring width was fixed, the structure could excite multiple Fano resonances within a certain outer radius range. This structure was used for refractive index sensing and its sensitivity and figure of merit (FOM) were 3004 nm/RIU and 3.14× 104 in a gas environment, respectively. Therefore, the proposed structure can excite multiple Fano resonances and achieve a high sensitivity and FOM, providing a theoretical basis for micro and nano applications.

physics, multidisciplinary
Multiple Fano resonance in MIM waveguide system with cross-shaped cavity

Qian Yang,Xuebo Liu,Fuqiang Guo,Haineng Bai,Baohua Zhang,Xin Li,Yang Tan,Zheng Zhang

DOI: https://doi.org/10.1016/j.ijleo.2020.165163

IF: 3.1

2020-10-01

Optik

Abstract:A Metal-Insulator-Metal (MIM) waveguide structures consists of cross-shaped cavity and baffle was proposed. The simulation results show that the tunable Fano resonance existed in cross-shaped cavity structures by adjusting the length parameters of horizontal and vertical cavities. Further, the position and alignment of the resonant peak wavelength can be easily changed. The sensitivity of the structure is up to 1075 nm/RIU and the figure of merit (FOM) is 9.95 × 104 by changing the parameters of structure. However, for improved double cross-shaped cavity structure, a linear refractive index sensitivity of 1100 nm/RIU with a figure of merit of about 1.08 × 105 can be obtained. The results clarified that the developed structure could have a great potential in nanosensor and spectral splitter.

optics
A Plasmonic Structure of Fano Resonance in the MIM Waveguide with r-Shaped Resonator for Refractive Index Sensor

Siti Rohimah,He Tian,Jinfang Wang,Jianfeng Chen,Jina Li,Xing Liu,Jingang Cui,Qiang Xu,Yu Hao

DOI: https://doi.org/10.21203/rs.3.rs-1148319/v1

2022-01-03

Abstract:Abstract A plasmonic structure of metal-insulator-metal (MIM) waveguide consisting of a single baffle waveguide and an r-shaped resonator is designed to produce Fano resonance. The finite element method uses the finite element method to analyze the transmission characteristics and magnetic field distributions of the plasmonic waveguide distributions. The simulation results exhibit two Fano resonances that can be achieved by the interference between a continuum state in the baffle waveguide and a discrete state in the r-shaped resonator. The Fano resonances can be simply tuned by changing geometrical parameters of the plasmonic structure. The value variations of geometrical parameters have different effects on sensitivity. Thus, the sensitivity of the plasmonic structure can achieve 1333 nm/RIU, with a figure of merit of 5876. The results of the designed plasmonic structure offer high sensitivity and nano-scale integration, which are beneficial to refractive index sensors, photonic devices at the chip nano-sensors, and biosensors applications.
Fano Resonance in a MIM Waveguide with Two Triangle Stubs Coupled with a Split-Ring Nanocavity for Sensing Application

Xiaoyu Yang,Ertian Hua,Mengmeng Wang,Yifei Wang,Feng Wen,Shubin Yan

DOI: https://doi.org/10.3390/s19224972

IF: 3.9

2019-11-15

Sensors

Abstract:Herein, a compact refractive index nanosensor comprising a metal- insulator- metal (MIM) waveguide with symmetric two triangle stubs coupled with a circular split-ring resonance cavity (CSRRC) is theoretically presented. An analysis of the propagation characteristics of the designed structure is discussed employing the finite element method (FEM). The calculation results revealed that a Fano resonance outline emerged, which results from an interaction between the continuous broadband state of the waveguide with two symmetric triangle stubs and the discrete narrowband state of the CSRRC. The influence of geometric parameters on sensing properties was studied in detail. The maximum sensitivity reached 1500 nm/RIU with a high figure of merit of 65.2. The presented structure has great applications for on-chip plasmonic nanosensors.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Fano Resonance in the Plasmonic Structure of MIM Waveguide with r-Shaped Resonator for Refractive Index Sensor

Siti Rohimah,He Tian,Jinfang Wang,Jianfeng Chen,Jina Li,Xing Liu,Jingang Cui,Qiang Xu,Yu Hao

DOI: https://doi.org/10.1007/s11468-022-01655-2

IF: 2.726

2022-05-24

Plasmonics

Abstract:A plasmonic structure of metal–insulator-metal (MIM) waveguide consisting of a baffle waveguide and an r-shaped resonator is designed to produce Fano resonances. The finite element method is used to analyze the transmission characteristics and magnetic field distributions of the plasmonic structure. The simulation results show that two Fano resonances can be achieved by the interference between a continuum state in the baffle waveguide and a discrete state in the r-shaped resonator. The Fano resonances can be tuned by changing the geometrical parameters of the plasmonic structure. The refractive index sensing is investigated and it is found that the sensitivity is strongly dependent on the geometrical parameters. The maximum sensitivity is 1333 nm/RIU, with the figure of merit of 5876. The results of the designed plasmonic structure offer high sensitivity and nano-scale integration, which are beneficial to nano-scale refractive index sensors, biosensors, and photonic devices.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry, physical
A MIM Waveguide Refractive-Index Construction According to SPPs and Fano Resonance

Feng Liu,Shubin Yan,Yang Cui,Biyi Huang

DOI: https://doi.org/10.1109/icmsp58539.2023.10171107

2023-01-01

Abstract:Here in, a micro and nano sensing structure constructed by a metal-insulator-metal (MIM) waveguide coupled with a ring cavity built-in two rectangles (RCBITR) is engineered on the basis of Surface Plasmon Excitation Element and Fano resonance. The transmission capability of the plasma waveguide coupled system are rationally examined by means of the finite element method sub. Also, the specific effects of different structural arguments on the sensitivity and FOM values of the system are evaluated. Simulations show that a pointed unsymmetric Fano resonance appears in the structure, and that separate attunements of the Fano resonance can be accomplished by varying changing the size of the two rectangular cavities and the filling medium. The final sensitivity and FOM values of the designed structure were calculated to be 2660 and 54.28 respectively. The designed structure greatly breaks the limitation of the traditional cavity, which is of considerable help to enhance the integration of the surface-based equipartition excitation sensor.
MIM Waveguide Structure Consisting of a Semicircular Resonant Cavity Coupled with a Key-Shaped Resonant Cavity.

Jun Zhu,Na Li

DOI: https://doi.org/10.1364/oe.395696

IF: 3.8

2020-01-01

Optics Express

Abstract:We describe the optical transmission properties of a surface plasmon polariton waveguide structure consisting of a metal-insulator-metal (MIM) waveguide and a semicircular resonant cavity coupled with a key-shaped resonant cavity. Finite element algorithm simulated the optical response of a MIM waveguide structure. The influence of coupling length, geometrical size, and asymmetry of the key-shaped cavity and the radius of the semicircular resonant cavity on the Fano resonance line was investigated. Results demonstrate that variation of the key-shaped cavity asymmetry leads to the appearance of dual Fano resonances. When materials with different refractive index fill in the key-shaped cavity, the MIM waveguide structure achieves a sensitivity of 1261.67 nm/RIU. This performance allows the waveguide to be used for nanoscale biosensor applications such as measuring glucose concentrations. We simulated various spiked glucose concentrations by calculating the frequency shift as the second Fano resonance line moves towards longer wavelength. Glucose concentrations were calculated from variations of the Fano resonant wavelength. The waveguide structure proposed in this paper shows impressive practical prospects for many applications in the chemical sensing and biomedical fields.
Multiple adjustable Fano resonance based on double half ring resonator and its application

Qian He,Yiping Huo,Yiyuan Guo,Qiqiang Niu,Xiangxiang Hao,Pengfei Cui,Yunyan Wang,Meina Song

DOI: https://doi.org/10.1088/1402-4896/abef38

2021-03-26

Physica Scripta

Abstract:Abstract In this paper, a compact nanostructure is proposed that includes a metal insulator metal (MIM) waveguide with a metal wall and a side-coupled half-ring resonator. The transmission characteristics of the system are studied numerically by using the finite element method (FEM). The simulation results show that double Fano resonances can be produced in the structure, and the two Fano resonances can be controlled independently by two different half rings. The position and intensity of the Fano resonance peaks can be adjusted flexibly and easily by changing the refractive index of the filling medium. The waveguide is sensitive to the refractive index of the filling medium inside the resonator and the maximum sensitivity and figure of merit ( FOM ) are 1260 nm/RIU and 26,000 respectively. By adding two more half-rings below, four independently adjustable Fano resonances are obtained. The structure of this paper can be used as a sensor which can detect the glucose concentration, so it has a broad application prospect in biomedical and chemical sensing fields.

physics, multidisciplinary
MIM waveguide refractive index sensor with graphene enhanced three-ring nested resonator Fano resonance

Yunping Qi,Qilong Wu,Mingrui Su,Hao Li,Xiangxian Wang

DOI: https://doi.org/10.1088/1402-4896/ad514b

2024-06-16

Physica Scripta

Abstract:In this paper, a metal-insulator-metal (MIM) waveguide featuring a three-ring nested cavity structure is proposed. We enhance and optimize this design by integrating graphene nanostructures into the ferrule resonance cavity, resulting in a hybrid graphene-MIM waveguide structure. The transmission spectra and electric fields generated by the structure are analyzed by using the finite element method (FEM), shedding light on the formation mechanism of various Fano resonance peaks. The validity of our theoretical analysis is confirmed using multimode interference coupled mode theory (MICMT), and the simulation results are largely aligning with the theoretical verification results. Next, by manipulating the chemical potential of graphene, the Fano resonance can be tuned across a wide range of wavelength bands. And this capability enables the realization of a dynamically tunable refractive index sensor for transmission spectroscopy. Under optimized parameter settings, the refractive index sensor achieves a maximum sensitivity of 1266.67 nm / RIU , and a maximum figure of merit (FOM) value of 199.67 RIU − 1 . Compared with conventional MIM waveguide devices, this design overcomes the difficulty of conventional MIM waveguide structures that cannot be dynamically tunable. Notably, the wavelength of the Fano resonance formed by the transmission spectrum can be dramatically altered when the refractive index of the medium in the surrounding environment is slightly changed. Therefore, this structure expands the repertoire of integrated optical devices with potential applications, particularly in the field of optical sensors.

physics, multidisciplinary
Transmission and Refractive Index Sensing Based on Fano Resonance in Mim Waveguide-Coupled Trapezoid Cavity

Jinli Zhou,Huibin Chen,Zhidong Zhang,Jun Tang,Jiangong Cui,Chenyang Xue,Shubin Yan

DOI: https://doi.org/10.1063/1.4974075

IF: 1.697

2017-01-01

AIP Advances

Abstract:A metal–insulator–metal (MIM) waveguide-coupled trapezoid cavity is presented, and the transmission properties are investigated by finite-element method. Results show that an asymmetric Fano profile emerged in the transmission spectrum, which was caused by the asymmetrical break of the MIM waveguide-coupled trapezoid cavity system. A refractive index sensitivity, Q-factor and FOM of approximately 750nm/RIU, 68.3 and 65.2 were measured based on the Fano resonance. The effect of the structural parameters on the transmission properties is also investigated. The results provide a new possibility for designing high-performance plasmonic devices.
Plasmonic Multichannel Refractive Index Sensor Based on Subwavelength Tangent-Ring Metal–Insulator–Metal Waveguide

Zicong Guo,Kunhua Wen,Qinyang Hu,Wenhui Lai,Jiyan Lin,Yihong Fang

DOI: https://doi.org/10.3390/s18051348

IF: 3.9

2018-04-26

Sensors

Abstract:In this paper, a multichannel refractive index sensor based on a subwavelength metal⁻insulator⁻metal (MIM) waveguide coupled with tangent-ring resonators is proposed. When two tangent-ring resonators were placed above the MIM waveguide, Fano resonance with asymmetrical line shape appeared in the transmission spectrum due to the interference between the light⁻dark resonant modes. The sensitivity and figure of merit were as high as 880 nm/RIU and 964, respectively. Through adding more tangent-ring resonators, multiple Fano resonances with ultrasharp peaks/dips were achieved in the wavelength range of 800⁻2000 nm. Besides, negative group delays were also observed in the Fano resonant dips. Two-dimensional finite-difference time-domain (FDTD) method was used to simulate and analyze the performances of the proposed structures. These kinds of multiring structures can find important applications in the on-chip optical sensing and optical communication areas.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Optical Refractive Index Sensor with Fano Resonance Based on Original MIM Waveguide Structure

Jun Zhu,Changsong Wu

DOI: https://doi.org/10.1016/j.rinp.2021.103858

IF: 4.565

2021-01-01

Results in Physics

Abstract:In recent years, optical refractive index sensors have received significant attention in the field of chemical and biological sensing owing to the advantages of small size. In order to achieve the requirements of small structure and high sensitivity of nano refractive index sensing, this paper proposes a Fano resonance–based waveguide structure in which a metal-insulator-metal (MIM) structure using surface plasmons and U-shaped cavities are coupled unilaterally. The transmittance spectrum of the waveguide-coupled resonator with different incident light wavelengths can be obtained. The U-shaped cavity and semi-annular straight waveguide are superimposed on and coupled to each other to form the Fano resonance transmittance spectrum. An extremely narrow impedance is formed in the transmittance spectrum. The proposed structure can obtain superior sensing performance at the nanoscale after the optimisation. The results confirm that the sensing sensitivity of the refractive index of the optimised waveguide structure can achieve up to 825 nm/RIU. The results of experiments show that this structure could accurately identify the five proposed pure edible vegetable oils at room temperature. But experiments have also shown that it could not effectively distinguish between the five proposed mixed edible vegetable oils. This structure provides an effective reference for the design and development of refractive index sensors for application to pure edible vegetable oils.
Fano Resonance in an Asymmetric MIM Waveguide Structure and Its Application in a Refractive Index Nanosensor

Mengmeng Wang,Meng Zhang,Yifei Wang,Ruijuan Zhao,Shubin Yan

DOI: https://doi.org/10.3390/s19040791

IF: 3.9

2019-02-15

Sensors

Abstract:Herein, the design for a tunable plasmonic refractive index nanosensor is presented. The sensor is composed of a metal–insulator–metal waveguide with a baffle and a circular split-ring resonator cavity. Analysis of transmission characteristics of the sensor structures was performed using the finite element method, and the influence of the structure parameters on the sensing characteristics of the sensor is studied in detail. The calculation results show that the structure can realize dual Fano resonance, and the structural parameters of the sensor have different effects on Fano resonance. The peak position and the line shape of the resonance can be adjusted by altering the sensitive parameters. The maximum value of structural sensitivity was found to be 1114.3 nm/RIU, with a figure of merit of 55.71. The results indicate that the proposed structure can be applied to optical integrated circuits, particularly in high sensitivity nanosensors.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Novel High Performance Fano Resonance Sensor with Circular Split Ring Resonance

Jun Zhu,Qining Xu,ZHenghao Jian

DOI: https://doi.org/10.1016/j.physb.2024.416205

2024-01-01

Abstract:This study conducts an in-depth discussion on the Fano resonance phenomenon and its application in optical sensors. A circular split ring was proposed. By designing a metal-insulator-metal (MIM) waveguide structure with specific geometric parameters, we successfully excited the Fano resonance, which produced a unique asymmetric Fano through the coupling of discrete and continuous states. Resonance transmission spectroscopy. The sensitivity of Fano resonance is extremely sensitive to changes in structural parameters. This characteristic provides a theoretical basis for the development of highly sensitive optical sensors. The simulation results show that by optimizing the structural parameters, high sensitivity Fano resonance characteristics can be obtained, further enhancing the performance of the optical sensor. The calculated sensitivity is as high as 1250 nm/RIU, and the figure of merit (FOM) reaches 54, indicating that the designed MIM waveguide structure has excellent sensing capabilities. This study not only demonstrates the potential of Fano resonance in improving sensor sensitivity, but also provides valuable guidance for the design and development of future optical sensors.
Fano resonance based on a triangular resonator and its application on nanosensing

Xinxin Ma,Tong Li,Yilin Wang,Zhao Chen

DOI: https://doi.org/10.1142/s0217984924501720

2024-01-13

Modern Physics Letters B

Abstract:Modern Physics Letters B, Ahead of Print. Fano resonance sensors based on metal–insulator–metal (MIM) waveguide have potential applications in fields such as biology, chemistry, and the environment. Here, a nanosensor based on Fano resonance in an MIM-based isosceles triangular resonator system is proposed and numerically studied by finite element method. Simulation results show that the Fano peak can be easily tuned by adjusting the scale factor and the refractive index within the resonator. Furthermore, we thoroughly analyze the impact of the apex angle, rotation angle, and vertical displacement of the resonator on the transmission spectrum. Finally, the sensing characteristics of the proposed structure are optimized and analyzed, and a high-performance plasmonic sensor with a sensitivity of 1100[math]nm/RIU and the maximum figure of merit of [math] is obtained. The distinctive attributes of our suggested structure are applicable in the realization of various integrated components for the development of multifunctional high-performance nanophotonics devices.

physics, condensed matter, applied, mathematical
A MIM Waveguide Structure of a High-Performance Refractive Index and Temperature Sensor Based on Fano Resonance

Pengwei Liu,Shubin Yan,Yifeng Ren,Xiaoyu Zhang,Tingsong Li,Xiushan Wu,Lifang Shen,Ertian Hua

DOI: https://doi.org/10.3390/app112210629

2021-11-11

Applied Sciences

Abstract:A plasmonic refractive index nanosensor structure consisting of a metal-insulator-metal (MIM) waveguide with two symmetrical rectangle baffles coupled with a connected-concentric-double rings resonator (CCDRR) is presented. In this study, its transmission characteristics were investigated using the finite element method (FEM). The consequences, studied via simulation, revealed that the transmission spectrum of the system presents a sharp asymmetric Fano profile due to the destructive interference between the wide-band mode of two rectangle baffles on the bus waveguide and the narrow-band mode of the CCDRR. The effects of the geometric parameters of the structure on the transmission characteristics were investigated comprehensively. A sensitivity of 2260 nm/RIU and figure of merit (FOM) of 56.5 were the best levels of performance that the designed structure could achieve. In addition, the system could act as a sensor for use for temperature sensing, with a sensitivity that could reach 1.48 nm/°C. The designed structure advances with technology with new detection positions and has good application prospects in other high-sensitivity nanosensor fields, for example, acting as a biosensor to detect the hemoglobin level in the blood.

Antidepressants, rhinosinusitis are topics of new AHCPR evidence reports.

Tunable triple Fano resonance in MIM waveguide system with split ring resonator

Sensing Features of the Fano Resonance in an MIM Waveguide Coupled with an Elliptical Ring Resonant Cavity

Optical Sensing Based on Multimode Fano Resonances in Metal-Insulator-metal Waveguide Systems with X-shaped Resonant Cavities.

Novel SPR Sensor Based on MIM-based Waveguide and an Asymmetric Cross-shaped Resonator

Multiple Fano resonances by MIM waveguide coupling whispering gallery mode resonator and application in Refractive index sensing

Multiple Fano resonance in MIM waveguide system with cross-shaped cavity

A Plasmonic Structure of Fano Resonance in the MIM Waveguide with r-Shaped Resonator for Refractive Index Sensor

Fano Resonance in a MIM Waveguide with Two Triangle Stubs Coupled with a Split-Ring Nanocavity for Sensing Application

Fano Resonance in the Plasmonic Structure of MIM Waveguide with r-Shaped Resonator for Refractive Index Sensor

A MIM Waveguide Refractive-Index Construction According to SPPs and Fano Resonance

MIM Waveguide Structure Consisting of a Semicircular Resonant Cavity Coupled with a Key-Shaped Resonant Cavity.

Multiple adjustable Fano resonance based on double half ring resonator and its application

MIM waveguide refractive index sensor with graphene enhanced three-ring nested resonator Fano resonance

Transmission and Refractive Index Sensing Based on Fano Resonance in Mim Waveguide-Coupled Trapezoid Cavity

Plasmonic Multichannel Refractive Index Sensor Based on Subwavelength Tangent-Ring Metal–Insulator–Metal Waveguide

Optical Refractive Index Sensor with Fano Resonance Based on Original MIM Waveguide Structure

Fano Resonance in an Asymmetric MIM Waveguide Structure and Its Application in a Refractive Index Nanosensor

Novel High Performance Fano Resonance Sensor with Circular Split Ring Resonance

Fano resonance based on a triangular resonator and its application on nanosensing

A MIM Waveguide Structure of a High-Performance Refractive Index and Temperature Sensor Based on Fano Resonance