Microalbuminuria is associated with a worse cardiovascular risk profile and target organ damage in essential hypertension.

R. Pontremoli,A. Sofia,A. Tirotta,M. Ravera,C. Nicolella,F. Viazzi,A. Magnasco,M. Del Sette,C. Martinoli,G. Deferrari

DOI: https://doi.org/10.1159/000425459

1996-07-01

Contributions to Nephrology

Abstract:

What problem does this paper attempt to address?

A New Data Assimilation Method of Recovering Turbulent Mean Flow Field at High Reynolds Numbers

Yilang Liu,Weiwei Zhang,Zhenhua Xia

DOI: https://doi.org/10.1016/j.ast.2022.107328

IF: 5.457

2022-01-01

Aerospace Science and Technology

Abstract:This paper proposes a new data assimilation method for recovering high fidelity turbulent flow field around airfoil at high Reynolds numbers based on experimental data, which is called Proper Orthogonal Decomposition Inversion (POD-Inversion) data assimilation method. Aiming at the flows including shock wave discontinuities or separated flows at high angle of attack, the proposed method can reconstruct high-fidelity turbulent flow field combining with experimental distributed force coefficients. We firstly perform the POD analysis to the turbulent eddy viscosity fields computed by SA model and obtain the base POD modes. Then optimized the POD coefficients by global optimization algorithm coupling with the Navier-Stokes equations solver. The high-fidelity turbulent flied are recovered by several main modes, which can dramatically reduce the dimensions of the system. The effectiveness of the method is verified by the cases of transonic flow around the RAE2822 airfoil at high Reynolds numbers and the separated flow at high angles of attack. The results demonstrate that the proposed assimilation method can recover the turbulent flow field which optimally match the experimental data, and significantly reduce the error of pressure coefficients. The proposed data assimilation method can offer high-fidelity field data for turbulent model based on machine learning.
Inversion of Internal Wave-Perturbed Sound-Speed Field Via Acoustic Data Assimilation

Jian-Long Li,Li-Ling Jin,Wen Xu

DOI: https://doi.org/10.1109/joe.2013.2255975

IF: 3.883

2014-01-01

IEEE Journal of Oceanic Engineering

Abstract:Model-based signal processing methods, such as matched-field processing, are concerned with exploiting the combination of the sound propagation physics in an ocean waveguide and the observation data. As such, they require accurate knowledge of the ocean acoustic environment. This paper presents an approach of environmental inversion via acoustic data assimilation (ADA), intended specifically to reconstruct the sound-speed field perturbed by linear internal waves. It exploits a variety of information sources, including direct local sound-speed measurements, an internal wave model, a full field acoustic propagation model, and acoustic pressure measurements. Compared to the previous work on ADA, four important improvements have been made: 1) a linear internal wave model is included; 2) a more realistic shallow-water environment from the Shelf Break PRIMER 1996 experiment is considered in the numerical simulations; and 3) effect of the sediment on acoustic propagation is considered in the inversion algorithm. The results further demonstrate the validity of the ADA approach.
Inversion of internal wave-perturbed ocean environments via acoustic data assimilation

Liling Jin,Jian Li,Wen Xu

DOI: https://doi.org/10.1109/OCEANS.2010.5664101

2010-01-01

Abstract:Model-based signal processing methods, such as matched-field processing, are concerned with exploiting the combination of the sound propagation physics in an ocean waveguide and the observation data. As such, they require accurate knowledge of the ocean acoustic environment. This paper presents an approach of environmental inversion via acoustic data assimilation (ADA), intended specifically to reconstruct the sound speed field perturbed by internal wave. It exploits a variety of information sources including direct local sound speed measurements, a dynamic internal wave model, a full field acoustic propagation model, and acoustic pressure measurements. Compared to the previous work on ADA, three important improvements have been made: 1) a linear internal wave model is included; 2) a more realistic shallow water environment from the Yellow Sea 1996 experiment is considered in the numerical simulations; 3) performance analyses are implemented for environmental inversion. The results further demonstrate the validity of the ADA approach.
Study of Acoustic Tomography Based on Data Assimilation for Shallow Water Environments

Jianlong Li,Wen Xu,Lei Jin,Guo Sheng-Ming,Cas Beijing

2012-01-01

Acta Acustica

Abstract:Based on the local sound speed measurement model,the acoustic propagation model and the local acoustic pressure measurement model,the approach of ocean acoustic data assimilation suitable to shallow water environments is discussed.In this approach,according to the optimality principle,the a priori knowledge of the local sound speed and acoustic pressure fields is combined with the acoustic propagation model,which effectively improves the precision in the parameter estimation.To validate the approach,the sound speed field in shallow water expressed by empirical orthogonal functions and the geo-acoustic parameters are estimated via a numerical implementation of this approach using the experimental sound velocity measurement data and the effects of different model errors on the prccision in the parameter estimation are analyzed.The approach discussed in the paper gives a novel idea for acoustic tomography in shallow water.
A variational data assimilation approach for sparse velocity reference data in coarse RANS simulations through a corrective forcing term

Oliver Brenner,Justin Plogmann,Pasha Piroozmand,Patrick Jenny

DOI: https://doi.org/10.1016/j.cma.2024.117026

2024-04-30

Abstract:The Reynolds-averaged Navier-Stokes (RANS) equations provide a computationally efficient method for solving fluid flow problems in engineering applications. However, the use of closure models to represent turbulence effects can reduce their accuracy. To address this issue, recent research has explored data-driven techniques such as data assimilation and machine learning. An efficient variational data assimilation (DA) approach is presented to enhance steady-state eddy viscosity based RANS simulations. To account for model deficiencies, a corrective force term is introduced in the momentum equation. In the case of only velocity reference data, this term can be represented by a potential field and is divergence-free. The DA implementation relies on the discrete adjoint method and approximations for efficient gradient evaluation. The implementation is based on a two-dimensional coupled RANS solver in OpenFOAM, which is extended to allow the computation of the adjoint velocity and pressure as well as the adjoint gradient. A gradient-based optimizer is used to minimize the difference between the simulation results and the reference data. To evaluate this approach, it is compared with alternative data assimilation methods for canonical stationary two-dimensional turbulent flow problems. For the data assimilation, sparsely distributed reference data from averaged high-fidelity simulation results are used. The results suggest that the proposed method achieves the optimization goal more efficiently compared to applying data assimilation for obtaining the eddy viscosity, or a field modifying the eddy viscosity, directly. The method works well for different reference data configurations and runs efficiently by leveraging coarse meshes.

Fluid Dynamics
A new data assimilation method of recovering turbulent flow field at high-Reynolds numbers for turbulence machine learning

Yilang Liu,Weiwei Zhang

DOI: https://doi.org/10.48550/arXiv.2007.05671

IF: 0.673

2020-07-11

Fluid Dynamics

Abstract:This paper proposes a new data assimilation method for recovering high fidelity turbulent flow field around airfoil at high Reynolds numbers based on experimental data, which is called Proper Orthogonal Decomposition Inversion (POD-Inversion) data assimilation method. Aiming at the flows including shock wave discontinuities or separated flows at high angle of attack, the proposed method can reconstruct high-fidelity turbulent flow field combining with experimental distributed force coefficients. We firstly perform the POD analysis to the turbulent eddy viscosity fields computed by SA model and obtain the base POD modes. Then optimized the POD coefficients by global optimization algorithm coupling with the Navier-Stokes equations solver. The high-fidelity turbulent flied are recovered by several main modes, which can dramatically reduce the dimensions of the system. The effectiveness of the method is verified by the cases of transonic flow around the RAE2822 airfoil at high Reynolds numbers and the separated flow at high angles of attack. The results demonstrate that the proposed assimilation method can recover the turbulent flow field which optimally match the experimental data, and significantly reduce the error of pressure coefficients. The proposed data assimilation method can offer high-fidelity field data for turbulent model based on machine learning.
Particle image velocimetry, delayed detached eddy simulation and data assimilation of inclined jet in crossflow

Sen Li,Xu Zhang,Wenwu Zhou,Chuangxin He,Yingzheng Liu

DOI: https://doi.org/10.1007/s12650-024-00974-2

IF: 1.7

2024-03-06

Journal of Visualization

Abstract:This research employs a continuous adjoint data assimilation (DA) algorithm to enhance the prediction of three-dimensional flow behavior in the inclined round jet in crossflow (JICF). To rectify model-form errors arising from the Boussinesq approximation, a force correction is implemented, and the linear part of the eddy viscosity is incorporated for numerical stability. The DA model is theoretically derived to minimize discrepancies between particle image velocimetry (PIV) measurement and the numerical predictions of the primary-adjoint system, thus enabling determination of the optimal contribution of the force correction. Observational data are acquired through planar PIV measurement in the centerplane of JICF with a fixed velocity ratio of 1.2 and a bulk Reynolds number of 150,000. Delayed detached eddy simulation is validated using PIV results and serves as supplementary data for evaluating the reconstruction capabilities of the DA method. The research explores various regularization parameters in the data assimilation procedure, emphasizing their impact on eddy viscosity, correction force, and overall flow prediction accuracy. The findings underscore the effectiveness of regularization in promoting smoothness in the optimized field, thereby mitigating overfitting and irregular solutions. In-depth analyses of critical flow features, including counter-rotating vortex pairs and Reynolds stress forcing, provide insights into the accuracy achieved by the data assimilation procedure. Despite limited measurement data, the study demonstrates the capability of the presented method to successfully recover global flow fields.

computer science, interdisciplinary applications,imaging science & photographic technology
Real-time thermoacoustic data assimilation

Andrea Nóvoa,Luca Magri

DOI: https://doi.org/10.1017/jfm.2022.653

2022-03-19

Abstract:Low-order thermoacoustic models are qualitatively correct, but they are typically quantitatively inaccurate. We propose a time-domain bias-aware method to make qualitatively low--order models quantitatively (more) accurate. First, we develop a Bayesian ensemble data assimilation method for a low-order model to self-adapt and self-correct any time that reference data becomes available. Second, we apply the methodology to infer the thermoacoustic states and heat release parameters on the fly without storing data (real-time). We perform twin experiments using synthetic acoustic pressure measurements to analyse the performance of data assimilation in all nonlinear thermoacoustic regimes, from limit cycles to chaos, and interpret the results physically. Third, we propose practical rules for thermoacoustic data assimilation. An increase, reject, inflate strategy is proposed to deal with the rich nonlinear behaviour; and physical time scales for assimilation are proposed in non-chaotic regimes (with the Nyquist-Shannon criterion) and in chaotic regimes (with the Lyapunov time). Fourth, we perform data assimilation using data from a higher-fidelity model. We introduce an echo state network to estimate in real-time the forecast bias, which is the model error of the low-fidelity model. We show that (i) the correct acoustic pressure, parameters, and model bias can be accurately inferred; (ii) the learning is robust as it can tackle large uncertainties in the observations (up to 50% the mean values); (iii) the uncertainty of the prediction and parameters is naturally part of the output; and (iv) both the time-accurate solution and statistics can be successfully inferred. Data assimilation opens up new possibility for real-time prediction of thermoacoustics by synergistically combining physical knowledge and experimental data.

Fluid Dynamics,Computational Engineering, Finance, and Science,Computational Physics
Robust experimental data assimilation for the Spalart-Allmaras turbulence model

Deepinder Jot Singh Aulakh,Xiang Yang,Romit Maulik

2024-07-25

Abstract:This study presents a methodology focusing on the use of computational model and experimental data fusion to improve the Spalart-Allmaras (SA) closure model for Reynolds-averaged Navier-Stokes solutions. In particular, our goal is to develop a technique that not only assimilates sparse experimental data to improve turbulence model performance, but also preserves generalization for unseen cases by recovering classical SA behavior. We achieve our goals using data assimilation, namely the Ensemble Kalman filtering approach (EnKF), to calibrate the coefficients of the SA model for separated flows. A holistic calibration strategy is implemented via the parameterization of the production, diffusion, and destruction terms. This calibration relies on the assimilation of experimental data collected in the form of velocity profiles, skin friction, and pressure coefficients. Despite using observational data from a single flow condition around a backward-facing step (BFS), the recalibrated SA model demonstrates generalization to other separated flows, including cases such as the 2D NASA wall mounted hump (2D-WMH) and modified BFS. Significant improvement is observed in the quantities of interest, i.e., skin friction coefficient ($C_f$) and pressure coefficient ($C_p$) for each flow tested. Finally, it is also demonstrated that the newly proposed model recovers SA proficiency for flows, such as a NACA-0012 airfoil and axisymmetric jet (ASJ), and that the individually calibrated terms in the SA model target specific flow-physics wherein the calibrated production term improves the re-circulation zone while destruction improves the recovery zone.

Fluid Dynamics,Machine Learning,Computational Physics,Data Analysis, Statistics and Probability
A Bayesian data assimilation method to enhance the time sequence prediction ability of data-driven models

Yunfei Li,Chengkun Lv,Juntao Chang,Ziao Wang,Chen Kong

DOI: https://doi.org/10.1063/5.0119688

IF: 1.697

2022-10-30

AIP Advances

Abstract:The generalization ability and robustness of data-driven models deteriorate when samples are scarce or input features are outside the training sample space. This research focuses on building a data assimilation (DA) framework that embeds the time sequence prediction model and improves the prediction results by constructing an enhanced system state vector that incorporates model bias parameters and new observation data to achieve the deviation correction and improve the robustness of the model. The DA framework proposed in this study includes three steps: prediction model inference, ensemble Kalman filter (EnKF) online deployment, and model parameter update. Wind tunnel experiments of a supersonic cascade are performed to obtain the original data for training the prediction model and optimizing the DA framework. Long short-term memory network (LSTM) was chosen as the prediction model. The testing set is distributed outside the sample space of the training set to verify the effectiveness of the DA framework for enhancing the time sequence prediction model. The improvement effects of the EnKF-enhanced LSTM model on the time sequence prediction results of the wall pressure in the oscillating flow field and the non-oscillating flow field are studied. The optimization results indicate that the LSTM model embedded in the DA framework can significantly improve the wall pressure prediction results. Thus, the results of this study lay a solid foundation for the condition monitoring and margin determination of the supersonic cascade flow field.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Data Assimilation of Ideally Expanded Supersonic Jet Using RANS Simulation for High-Resolution PIV Data

Yuta Ozawa,Taku Nonomura

DOI: https://doi.org/10.3390/aerospace11040291

IF: 2.66

2024-04-10

Aerospace

Abstract:Data assimilation using particle image velocimetry (PIV) and Reynolds-averaged Navier–Stokes (RANS) simulation was performed for an ideally expanded supersonic jet flying at a Mach number of 2.0. The present study aims to efficiently reconstruct all the physical quantities in the aeroacoustic fields that match well with a realistic, experimentally obtained flow field. The two-dimensional, two-component PIV measurement was applied to the jet axis plane, and the time-averaged velocity field was obtained using single-pixel ensemble correlation. Two-dimensional axisymmetric RANS simulation using the Menter shear stress transport (SST) model was also performed, and the parameters of the SST model were optimized via data assimilation using the ensemble Kalman filter. The standard deviation of the observation noise σ, which is a parameter of the ensemble Kalman filter, is estimated by the previously proposed method (Nakamura et al., Low-Grid-Resolution-RANS-Based Data Assimilation of Time-Averaged Separated Flow Obtained by LES. Int. J. Comp. Fluid. Dyn., 2022), and its effectiveness was investigated for the first time. This method effectively estimated the magnitude of σ at each generation without tuning the hyperparameters. The assimilated flow fields exhibited similar flow structures observed in PIV such as the potential core length or shear layer. Therefore, the present framework can be used to estimate time-averaged full flow fields that match well with experimentally observed flow fields, and has the potential to construct a database for the Navier-Stokes-based stability analysis that requires a full flow field.

engineering, aerospace
Spectral adjoint-based assimilation of sparse data in unsteady simulations of turbulent flows

Justin Plogmann,Oliver Brenner,Patrick Jenny

2024-05-30

Abstract:The URANS equations provide a computationally efficient tool to simulate unsteady turbulent flows for a wide range of applications. To account for the errors introduced by the turbulence closure model, recent works have adopted data assimilation (DA) to enhance their predictive capabilities. Recognizing the challenges posed by the computational cost of 4DVar DA for unsteady flows, we propose a 3DVar DA framework that incorporates a time-discrete Fourier transform of the URANS equations, facilitating the use of the stationary discrete adjoint method in Fourier space. Central to our methodology is the introduction of a corrective, divergence-free, and unsteady forcing term, derived from a Fourier series expansion, into the URANS equations. This term aims at mitigating discrepancies in the modeled divergence of Reynolds stresses, allowing for the tuning of stationary parameters across different Fourier modes. Our implementation is built upon an extended version of the coupled URANS solver in OpenFOAM, enhanced to compute adjoint variables and gradients. This design choice ensures straightforward applicability to various flow setups and solvers, eliminating the need for specialized harmonic solvers. A gradient-based optimizer is employed to minimize discrepancies between simulated results and sparse velocity reference data. The effectiveness of our approach is demonstrated through its application to flow around a two-dimensional circular cylinder at a Reynolds number of 3900. Our results highlight the method's ability to reconstruct mean flow accurately and improve the vortex shedding frequency through the assimilation of zeroth mode data. Additionally, the assimilation of first mode data further enhances the simulation's capability to capture low-frequency dynamics of the flow, and finally, it runs efficiently by leveraging a coarse mesh.

Fluid Dynamics
Adaptive Multifidelity Data Assimilation for Nonlinear Subsurface Flow Problems

Qiang Zheng,Jiangjiang Zhang,Wenjie Xu,Laosheng Wu,Lingzao Zeng

DOI: https://doi.org/10.1029/2018wr023615

IF: 5.4

2019-01-01

Water Resources Research

Abstract:Ensemble-based methods have been widely used for characterization of model parameters. Due to their Monte Carlo nature, these methods can be easily implemented but usually need relatively large ensemble sizes to guarantee the accuracy, resulting in a high computational cost. To address this issue, we propose an adaptive multifidelity ensemble smoother for data assimilation, which takes advantage of both the accuracy of a high-fidelity (HF) model and the efficiency of a low-fidelity (LF) model. In this work, an ensemble smoother-based multiple data assimilation scheme is employed. In the forecast step, a large number of LF simulations and a small number of HF simulations are implemented. By exploring the correlations between the predictions of HF and LF models, a multifidelity Gaussian process is established to serve as a surrogate for the original system without sacrificing accuracy. To consider the surrogate errors and avoid the underestimation of uncertainties in the analysis step, the ensemble smoother-based multiple data assimilation scheme is amended with extra iterations. After each analysis step, the multifidelity Gaussian process surrogate is locally refined in the posterior region. In summary, the expensive HF model evaluations are implemented only if necessary. The efficiency of the proposed method is illustrated by a synthetic case and a real-world experiment. It is shown that even though the majority of model evaluations are implemented using the LF models in an adaptive multifidelity ensemble smoother, the accuracy is not sacrificed. The proposed multifidelity framework is with the general applicability since it can be equally combined with other ensemble-based data assimilation methods.
A unified method of data assimilation and turbulence modeling for separated flows at high Reynolds numbers

Zhiyuan Wang,Weiwei Zhang

DOI: https://doi.org/10.1063/5.0136420

IF: 4.6

2023-02-16

Physics of Fluids

Abstract:In recent years, machine learning methods represented by deep neural networks (DNNs) have been a new paradigm of turbulence modeling. However, in the scenario of high Reynolds numbers, there are still some bottlenecks, including the lack of high-fidelity data and the stability problem in the coupling process of turbulence models and the Reynolds-averaged Navier–Stokes (RANS) solvers. In this paper, we propose an improved ensemble Kalman inversion method as a unified approach of data assimilation and turbulence modeling for separated flows at high Reynolds numbers. A novel ensemble design method based on transfer learning and a regularizing strategy are proposed to improve the method. The trainable parameters of DNN are optimized according to the given experimental surface pressure coefficients in the framework of mutual coupling between the RANS solvers and DNN eddy viscosity models. In this way, data assimilation and model training are integrated into one step to get the high-fidelity turbulence models agree well with experiments directly. The effectiveness of the method is verified by cases of flows around S809 airfoil at high Reynolds numbers. Through assimilation of few experimental states, we can get turbulence models generalizing well to both attached and separated flows at different angles of attack, which also perform well in stability and robustness. The errors of lift coefficients at high angles of attack are significantly reduced by more than three times compared with the traditional Spalart–Allmaras model.

mechanics,physics, fluids & plasmas
Variational assimilation of sparse time-averaged data for efficient adjoint-based optimization of unsteady RANS simulations

Justin Plogmann,Oliver Brenner,Patrick Jenny

DOI: https://doi.org/10.1016/j.cma.2024.117052

2024-05-30

Abstract:Data assimilation (DA) plays a crucial role in extracting valuable information from flow measurements in fluid dynamics problems. Often only time-averaged data is available, which poses challenges for DA in the context of unsteady flow problems. Recent works have shown promising results in optimizing Reynolds-averaged Navier-Stokes (RANS) simulations of stationary flows using sparse data through variational data assimilation, enabling the reconstruction of mean flow profiles. In this study we perform three-dimensional variational data assimilation of sparse time-averaged data into an unsteady RANS (URANS) simulation by means of a stationary divergence-free forcing term in the URANS equations. Efficiency and speed of our method are enhanced by employing coarse URANS simulations and leveraging the stationary discrete adjoint method for the time-averaged URANS equations. The data assimilation codes were developed in-house using OpenFOAM for the URANS simulations as well as for the solution of the adjoint problem, and Python for the gradient-based optimization. Our results demonstrate that data assimilation of sparse time-averaged velocity measurements not only enables accurate mean flow reconstruction, but also improves the flow dynamics, specifically the vortex shedding frequency. To validate the efficacy of our approach, we applied it to turbulent flows around cylinders of various shapes at Reynolds numbers ranging from 3000 to 22000. Our findings indicate that data points near the cylinder play a crucial role in improving the vortex shedding frequency, while additional data points further downstream are necessary to also reconstruct the time-averaged velocity field in the wake region.

Fluid Dynamics,Computational Physics
Data assimilation in a nonlinear time-delayed dynamical system

Tullio Traverso,Luca Magri

DOI: https://doi.org/10.1007/978-3-030-22747-0_12

2019-04-09

Abstract:When the heat released by a flame is sufficiently in phase with the acoustic pressure, a self-excited thermoacoustic oscillation can arise. These nonlinear oscillations are one of the biggest challenges faced in the design of safe and reliable gas turbines and rocket motors. In the worst-case scenario, uncontrolled thermoacoustic oscillations can shake an engine apart. Reduced-order thermoacoustic models, which are nonlinear and time-delayed, can only qualitatively predict thermoacoustic oscillations. To make reduced-order models quantitatively predictive, we develop a data assimilation framework for state estimation. We numerically estimate the most likely nonlinear state of a Galerkin-discretized time delayed model of a horizontal Rijke tube, which is a prototypical combustor. Data assimilation is an optimal blending of observations with previous state estimates (background) to produce optimal initial conditions. A cost functional is defined to measure the statistical distance between the model output and the measurements from experiments; and the distance between the initial conditions and the background knowledge. Its minimum corresponds to the optimal state, which is computed by Lagrangian optimization with the aid of adjoint equations. We study the influence of the number of Galerkin modes, which are the natural acoustic modes of the duct, with which the model is discretized. We show that decomposing the measured pressure signal in a finite number of modes is an effective way to enhance state estimation, especially when nonlinear modal interactions occur during the assimilation window. This work represents the first application of data assimilation to nonlinear thermoacoustics, which opens up new possibilities for real-time calibration of reduced-order models with experimental measurements.

Computational Engineering, Finance, and Science,Machine Learning,Data Analysis, Statistics and Probability,Fluid Dynamics
Flow–acoustic resonance mechanism in tandem deep cavities coupled with acoustic eigenmodes in turbulent shear layers

Peng Wang,Sichang Jia,Zheng He,Chuangxin He,Hyung Jin Sung,Yingzheng Liu

DOI: https://doi.org/10.1017/jfm.2024.209

IF: 3.7

2024-04-06

Journal of Fluid Mechanics

Abstract:This study presents the interplay of flow and acoustics within tandem deep cavities, focusing on the resonance mechanism occurring between turbulent shear layers and acoustic eigenmodes. The arrangement inside the tandem deep cavities includes both close and remote configurations. A combined fully coupled and decoupled aeroacoustic simulation strategy was devised. Employing an advanced high-order spectral/hp element method in conjunction with implicit large eddy simulation, the nonlinear compressible Navier–Stokes equations were solved to acquire internal flow–acoustic resonant field. In parallel, the linearized Navier–Stokes equations were tackled to determine coherent shear layer perturbations with external acoustic forcing. Based on acoustic measurements, the mainstream Reynolds number approaches approximately , where we identified the presence of frequency lock-in and a resonance range. Aeroacoustic noise sources were examined by implementing spectral proper orthogonal decomposition to decompose the pressure fields into hydrodynamic and acoustic components. As feedback intensified, the flow characteristics by the acoustic forcing effect and the flow-interactive effect were categorized according to the development of concurrent turbulent shear layers. Subsequently, the alternating and synchronous behaviours of concurrent shear layers resonated with the out-of-phase and in-phase acoustic eigenmodes were identified, and the corresponding large-scale counter-rotating vortex pairs and co-rotating vortex structures at the cavity entrances were extracted. The acoustic power generated by the Coriolis force was calculated using Howe's vortex-sound analogy, and the aeroacoustic energy transfer mechanism between large-scale shear layer vortices with acoustic eigenmodes was further explored. Finally, a linear response of coherent perturbations of the concurrent shear layers by external acoustic forcing was established. The amplification of flow in the streamwise direction toward the main duct led to the formation of coherent vortex structures, accompanied by separation bubbles into the main duct.

mechanics,physics, fluids & plasmas
ANN-based Intelligent Simulation on Flow Field

顾正华,唐洪武,高柱,李云,肖洋

DOI: https://doi.org/10.3969/j.issn.1004-731x.2004.07.003

2004-01-01

Abstract:On the basis of Flow Intelligent Model (FIM) conception from Gu Zheng-hua and Tang Hong-wu, penetrating frame-tetrahedrons wake field was simulated through artificial neural networks method, and a new idea was provided on flow fields simulation. Through flume experiment with Acoustic Doppler Velocimeter (ADV) system, nine kinds of penetrating frame-tetrahedrons wake fields on the different conditions were measured as learning and testing samples of penetrating frame-tetrahedrons FIM. The expression of the wake fields intelligent model was obtained by training, and its simulation result was consonant with prototype. Conclusions illustrate that FIM-based ANN will be prosperous for its rapid simulation speed, good extension generalization capability and tolerance, and high precision.
Predicting Flow Reversals in a Computational Fluid Dynamics Simulated Thermosyphon Using Data Assimilation

Andrew J Reagan,Yves Dubief,Peter Sheridan Dodds,Christopher M Danforth

DOI: https://doi.org/10.1371/journal.pone.0148134

IF: 3.7

2016-02-05

PLoS ONE

Abstract:A thermal convection loop is a annular chamber filled with water, heated on the bottom half and cooled on the top half. With sufficiently large forcing of heat, the direction of fluid flow in the loop oscillates chaotically, dynamics analogous to the Earth's weather. As is the case for state-of-the-art weather models, we only observe the statistics over a small region of state space, making prediction difficult. To overcome this challenge, data assimilation (DA) methods, and specifically ensemble methods, use the computational model itself to estimate the uncertainty of the model to optimally combine these observations into an initial condition for predicting the future state. Here, we build and verify four distinct DA methods, and then, we perform a twin model experiment with the computational fluid dynamics simulation of the loop using the Ensemble Transform Kalman Filter (ETKF) to assimilate observations and predict flow reversals. We show that using adaptively shaped localized covariance outperforms static localized covariance with the ETKF, and allows for the use of less observations in predicting flow reversals. We also show that a Dynamic Mode Decomposition (DMD) of the temperature and velocity fields recovers the low dimensional system underlying reversals, finding specific modes which together are predictive of reversal direction.

Microalbuminuria is associated with a worse cardiovascular risk profile and target organ damage in essential hypertension.

A New Data Assimilation Method of Recovering Turbulent Mean Flow Field at High Reynolds Numbers

Inversion of Internal Wave-Perturbed Sound-Speed Field Via Acoustic Data Assimilation

Inversion of internal wave-perturbed ocean environments via acoustic data assimilation

Study of Acoustic Tomography Based on Data Assimilation for Shallow Water Environments

A variational data assimilation approach for sparse velocity reference data in coarse RANS simulations through a corrective forcing term

A new data assimilation method of recovering turbulent flow field at high-Reynolds numbers for turbulence machine learning

Particle image velocimetry, delayed detached eddy simulation and data assimilation of inclined jet in crossflow

Real-time thermoacoustic data assimilation

Robust experimental data assimilation for the Spalart-Allmaras turbulence model

A Bayesian data assimilation method to enhance the time sequence prediction ability of data-driven models

Data Assimilation of Ideally Expanded Supersonic Jet Using RANS Simulation for High-Resolution PIV Data

Spectral adjoint-based assimilation of sparse data in unsteady simulations of turbulent flows

Adaptive Multifidelity Data Assimilation for Nonlinear Subsurface Flow Problems

A unified method of data assimilation and turbulence modeling for separated flows at high Reynolds numbers

Variational assimilation of sparse time-averaged data for efficient adjoint-based optimization of unsteady RANS simulations

Data assimilation in a nonlinear time-delayed dynamical system

Flow–acoustic resonance mechanism in tandem deep cavities coupled with acoustic eigenmodes in turbulent shear layers

ANN-based Intelligent Simulation on Flow Field

Predicting Flow Reversals in a Computational Fluid Dynamics Simulated Thermosyphon Using Data Assimilation