On the roles of humidification and radiation during the ignition of ammonia–hydrogen–air mixtures

Shu Zheng,Hao Liu,Yiqing Wang,Xinyi Chen,Ran Sui,Qiang Lu

DOI: https://doi.org/10.1016/j.combustflame.2023.112832

IF: 4.4

2023-05-16

Combustion and Flame

Abstract:It is well established that radiation plays an important role in the combustion process of premixed combustible mixtures, which significantly affects the flame temperature and chemical reaction rates during flame propagation. However, the impact of radiation, especially the radiation reabsorption effect, on minimum ignition energy ( E min ) still lacks thorough research and understanding. In this study, the ignition processes of spherical NH 3 /H 2 /H 2 O/O 2 /N 2 flames were simulated. Three different computational models, the adiabatic model (ADI), the optically thin model (OTM) and the statistical narrow-band model (SNB), were employed to determine the radiation effect (including both radiative heat loss and reabsorption) on E min . Results indicated that the water content in the premixture suppressed ignition; characteristically, the addition of vol. 9.63% H 2 O in the premixture resulted in a nearly 40% increase of E min under adiabatic condition. Both radiative heat loss and reabsorption effects increased E min . The radiation effects on E min , quantified as the relative differences between the OTM-/SNB- and ADI-obtained E min , were up to 16.47% (for radiative heat loss) and 17.65% (for radiation reabsorption), respectively. It was further demonstrated that radiation increased E min through the combination of three aspects: thermal effect, chemical effect and flame structure effect. The thermal effect, induced by the outward radiative emission, reduced the ignition kernel temperature significantly. The reduced temperature decelerated chemical reactions and then suppressed the chemical heat release, i.e., the chemical effect as reflected by the concentrations of H, O and OH radicals. Furthermore, the larger flame thickness obtained by the radiation models slowed down the diffusion of fuels, which weakened the chemical heat release and eventually increased the E min . Moreover, the reaction-diffusion region simulated by SNB was enlarged due to the radiation reabsorption, and thus, E min obtained by SNB was higher than that by OTM.

energy & fuels,engineering, chemical, mechanical,thermodynamics, multidisciplinary