Study on Performance Improvement through Reducing Axial Force of Ferrite Double-Layer Spoke-Type Permanent Magnet Synchronous Motor with Core Skew

Dong-Woo Nam,Kangbeen Lee,Si-Woo Song,Won-Ho Kim,Jae-Jun Lee

DOI: https://doi.org/10.3390/machines12040280

IF: 2.899

2024-04-23

Machines

Abstract:Recently, due to the price fluctuation and supply instability of rare earth mineral resources, there has been a lot of development of electric motors using non-rare-earth permanent magnets. As a result, motors using Dy-free permanent magnets and ferrite permanent magnets are being researched, and, in particular, ferrite permanent magnets often utilize spoke-type structures, which are magnetic flux concentrators, to compensate for their low coercivity and residual flux density. However, in general, spoke-type PMSMs do not use much reluctance torque, so double-layer spoke-type PMSMs have been studied for their more efficient design. Unlike general spoke-type PMSMs, double-layer spoke-type PMSMs can utilize high reluctance torque by increasing the difference between d-axis and q-axis reluctance. However, as the difference in magnetic resistance increases, vibration and noise are generated, which adversely affects the mechanical part and shortens the life of the motor. Although this problem seemed to be solved by applying core skew in the previous study, it was confirmed that the axial force caused by the axial leakage flux occurred in the maximum torque per ampere (MTPA) control section and the torque ripple was increased. Therefore, in this paper, a model that can apply symmetrical core skew and reduce axial force is proposed. First, the causes of the axial force generated in previous studies were analyzed. Based on the analysis of these causes, a new symmetrical core skew structure was proposed, and its justification was verified through FEA.

engineering, mechanical, electrical & electronic

What problem does this paper attempt to address?

The paper attempts to address the issue of improving motor performance in double-layer spoke-type Permanent Magnet Synchronous Motors (PMSM) by reducing axial force. Specifically, the study found that while the application of a core skew structure can reduce cogging torque and torque ripple at high speeds, it increases torque ripple at low speeds. Additionally, axial force can lead to increased mechanical load on the motor bearings, causing vibration and noise, and shortening the motor's lifespan. Therefore, the paper proposes a symmetric core skew model to reduce axial force, thereby reducing torque ripple at low speeds.

Summary as follows:
1. **Background**: Due to fluctuations in rare earth resource prices and unstable supply, researchers have begun developing motors using non-rare earth permanent magnet materials, particularly double-layer spoke-type PMSM using ferrite permanent magnet materials.
2. **Problem**: Although the application of a core skew structure can reduce cogging torque and torque ripple at high speeds, it increases torque ripple at low speeds, and axial force leads to increased mechanical load on the motor bearings, affecting the motor's performance and lifespan.
3. **Solution**: The paper proposes a symmetric core skew model that optimizes the design to reduce axial force, thereby reducing torque ripple at low speeds.

I hope this summary helps you understand the content of the paper. If you have more questions or need further explanation, please feel free to let me know.