Abstract:The degradation of chlorine-containing volatile organic compounds (CVOCs) utilizing catalytic combustion technology is subject to the catalyst chlorine poisoning, which is resulted from the chlorination of active phases, even though the structural stable perovskite. The reaction between Ca species and dissociated chlorine species is demonstrated as an efficient way to inhibited chlorine poisoning of the active phase. Herein, a Ca substituted partial La prepared La 0.8 Ca 0.2 MnO 3 (named as L8C2MO) perovskite was treated by 5% H 2 /Ar plasma driven route (the treated sample was denoted as L8C2MO-P), which was applied for the chlorobenzene oxidation removal. The integrated characterization results of XRD, XPS, HRTEM, etc . confirmed that Ca (mainly exhibited as CaCO 3 ) was successfully exsolved from La 0.8 Ca 0.2 MnO 3 and simultaneously leaved oxygen vacancies on the surficial layers. The continuous catalytic oxidation experiments illustrated that the conversion efficiency of L8C2MO was unexpectedly decreased compared with that of LaMnO 3 (LMO in short) sample, while that of L8C2MO-P was nearly maintained the oxidation capacity, with approximately 12°C of 90% chlorobenzene conversion temperature ( T 90 ) higher than that of LMO. Importantly, the CO 2 and inorganic chlorine species yields were significantly enhanced for L8C2MO and L8C2MO-P. The characteristic of used samples showed a possible chlorinated Ca species formation while the status of Mn phases was hardly changed, suggesting the exsolved Ca could inhibited the poison of Mn sites by binding with dissociative chlorine species. Additionally, oxygen vacancies that generated along with Ca exsolution process was definitely contributed to the deep oxidation of chlorobenzene. The possible reaction route was also studied by in situ DRITS and GCMS. The work provides a potential route as in situ growth of adjacent sites to protect active phases from chlorine poison in CVOCs catalytic oxidation process.

Synthesis of a perovskite-type catalyst from Cr electroplating sludge for effective catalytic oxidization of VOC

Catalytic performance improvement of VOCs oxidation over MnOx and GdMnO3 composite oxides from spent lithium-ion batteries: Effect of acid treatment

Highly Efficient Degradation of Pharmaceutical Sludge by Catalytic Wet Oxidation Using CuO-CeO2/γ-Al2O3 As a Catalyst

Electroplating sludge-derived metal and sulfur co-doping catalyst and its application in methanol production by CO2 catalytic hydrogenation

Synergistic immobilization of chromium in tannery sludge by ZnO and TiO2 and the oxidation mechanism of Cr(III) under alkaline in high temperature

Promoting Effect of FeOx Addition on the Mechanochemically Prepared Vanadium-Based Catalyst for Real PCDD/Fs Removal and Mechanism Insight

The characteristics and resource utilization of chromium-containing electroplating sludge

Co-extraction of vanadium and chromium from vanadium-chromium–bearing reducing slag via oxygen microbubbles intensified copper oxide catalytic oxidation method in alkaline solutions

Selective recovery of platinum from spent catalysts to fabricate platinum/amorphous manganese oxide/corrugated silica carrier for formaldehyde removal

Efficient degradation of cellulosic ethanol wastewater by perovskite activation of Sr element A-site doped lanthanide copper chalcogenide materials

Upcycling of Cr-Containing Sulfate Waste into Efficient FeCrO3/Fe2O3 Catalysts for CO2 Hydrogenation Reaction

Constructing n-type doped perovskite from Ti-bearing solid waste to boost the NO-to-NO2 oxidation

Porous biochar-driven innovative Cr(VI) reduction and resource recovery

Sludge Recycling from Non-Lime Purification of Electrolysis Wastewater: Bridge from Contaminant Removal to Waste-Derived NOX SCR Catalyst

Kinetic Study and Catalytic Activity of Cr3+ Catalyst Supported on Calcium Silicate Hydrates for VOC Oxidation

Facile synthesis of Cr-doped ferrite catalyst from Cr-containing electroplating sludge with activated persulfate for efficient degradation of tetracycline

Toxic chromium treatment induce amino-assisted electrostatic adsorption for the synthesis of highly dispersed chromium catalyst

Vitrification of petrochemical sludge for rapid, facile, and sustainable fixation of heavy metals

Microbubble-assisted liquid oxidation for efficient one-step phase decomposition and recovery of V and Cr from vanadium slag

Plasma driven exsolution of Ca as the adjacent dechlorinated site in La 0.8 Ca 0.2 MnO 3 perovskite: a highly mineralization chlorobenzene oxidation catalyst

Mechanochemical activation of titanium slag for effective selective catalytic reduction of nitric oxide