Claspin, a Chk1-regulatory protein, monitors DNA replication on chromatin independently of RPA, ATR, and Rad17.

Joon Lee,A. Kumagai,W. G. Dunphy

DOI: https://doi.org/10.1016/S1097-2765(03)00045-5

2003-02-01

Molecules and Cells

Abstract:

What problem does this paper attempt to address?

A Cu2o-Derived Polymeric Carbon Nitride Heterostructured Catalyst For The Electrochemical Reduction Of Carbon Dioxide To Ethylene

Wenwen Lin,Hao Chen,Zihao Li,Kotaro Sasaki,Siyu Yao,Zihao Zhang,Jing Li,Jie Fu

DOI: https://doi.org/10.1002/cssc.202100659

IF: 8.4

2021-01-01

ChemSusChem

Abstract:The electroreduction of carbon dioxide to hydrocarbons has been proposed as a promising way to utilize CO2 and maintain the ecosystem carbon balance. However, the selective reduction of CO2 to C-2 hydrocarbons is still challenging. In this study, a highly efficient heterostructured catalyst has been developed, composed of a carbon nitride (CN)-encapsulated copper oxide hybrid (CuxO/CN). The interaction between the metal and carbon nitride in the heterostructured catalysts improves the intrinsic electrical conductivity and the charge transfer processes at metal-support interfaces. A remarkable enhancement in the selectivity of hydrocarbons is achieved with these modified Cu-based electrocatalysts, with an onset potential of -0.4 V and high C2H4 faradaic efficiency of 42.2 %, and these catalysts can also effectively suppress H-2 evolution during the CO2 reduction reaction. This work provides a simple and cost-effective method for synthesizing CN-encapsulated catalysts that provides the possibility of efficiently converting CO2 into C-2 hydrocarbons.
Efficiently Electroreducing CO2 to Ethylene on Heterostructured CeO2/CuO

Sifan Wang,Hao Chen,Wenwen Lin,Wenhua Zhou,Xiangzhou Lv,Jianghao Wang,Jie Fu

DOI: https://doi.org/10.1021/acs.iecr.2c02726

2022-01-01

Industrial & Engineering Chemistry Research

Abstract:Electrochemically converting CO2 into valuable hydrocarbon products offers a promising avenue to achieve the goal of carbon neutrality. However, enhancing the selectivity of a certain hydrocarbon product, particularly in ethylene, remains a challenge due to the limitation of the scaling relationship. Herein, we present a CuO-CeO2 hybrid catalyst, developed through interface engineering, that significantly improves the selectivity of ethylene. Benefiting from the structure nature of CeO2 quantum dots, abundant interfaces of CeO2 and CuO were constructed to provide more active sites for catalysis. Moreover, the strong interface interaction between ceria and CuO was experimentally demonstrated to enhance the adsorption of CO2 and CO and thus improve the intrinsic activity of CO2 reduction. The optimal catalyst delivered an impressing ethylene selectivity (49.7%) and partial current density (197 mA/cm2). More broadly, this work not only provides an effective strategy to construct abundant heterointerfaces but also opens new possibilities for designing advanced hetero-catalysts for CO2 reduction.
Unveiling the Synergistic Effect between Graphitic Carbon Nitride and Cu 2 O toward CO 2 Electroreduction to C 2 H 4

Jiguang Zhang,Yuting Guo,Bin Shang,Tingting Fan,Xinyi Lian,Pingping Huang,Yunyun Dong,Zhou Chen,Xiaodong Yi

DOI: https://doi.org/10.1002/cssc.202002427

IF: 8.4

2020-12-18

ChemSusChem

Abstract:Electrochemical reducing carbon dioxide (CO 2 RR) to ethylene is one of the most promising strategies to reduce carbon dioxide emissions and simultaneously produce high value‐added chemicals. However, the lack of catalysts with excellent activity and stability limits the large‐scale application of this technology. In this work, we fabricated the graphitic carbon nitride (g‐C 3 N 4 ) supported Cu 2 O composite which exhibits a 32.2% Faradaic efficiency of C 2 H 4 with a partial current density of ‐4.3 mA/cm 2 at ‐1.1 V vs. RHE in 0.1 M KHCO 3 electrolyte. The introduction of g‐C 3 N 4 support not only enhances the uniform dispersion of Cu 2 O nanocubes, but also stabilizes the important *CO intermediates. Moreover, the g‐C 3 N 4 itself has a good activity of reducing CO 2 to form *CO, which enriches the key intermediates of C‐C coupling around cuprous oxide. Our findings highlight the importance of the g‐C 3 N 4 support, a unique two‐dimensional material, including not only the strong CO 2 adsorption and activation capacity but also its synergistic effect with the cuprous oxide in CO 2 RR selectivity.

chemistry, multidisciplinary,green & sustainable science & technology
Electrocatalytic Reduction of CO2 to Ethylene by Molecular Cu-Complex Immobilized on Graphitized Mesoporous Carbon

Mani Balamurugan,Hui-Yun Jeong,Venkata Surya Kumar Choutipalli,Jung Sug Hong,Hongmin Seo,Natarajan Saravanan,Jun Ho Jang,Kang-Gyu Lee,Yoon Ho Lee,Sang Won Im,Venkatesan Subramanian,Sun Hee Kim,Ki Tae Nam

DOI: https://doi.org/10.1002/smll.202000955

IF: 13.3

Small

Abstract:The electrochemical reduction of carbon dioxide (CO2 ) to hydrocarbons is a challenging task because of the issues in controlling the efficiency and selectivity of the products. Among the various transition metals, copper has attracted attention as it yields more reduced and C2 products even while using mononuclear copper center as catalysts. In addition, it is found that reversible formation of copper nanoparticle acts as the real catalytically active site for the conversion of CO2 to reduced products. Here, it is demonstrated that the dinuclear molecular copper complex immobilized over graphitized mesoporous carbon can act as catalysts for the conversion of CO2 to hydrocarbons (methane and ethylene) up to 60%. Interestingly, high selectivity toward C2 product (40% faradaic efficiency) is achieved by a molecular complex based hybrid material from CO2 in 0.1 m KCl. In addition, the role of local pH, porous structure, and carbon support in limiting the mass transport to achieve the highly reduced products is demonstrated. Although the spectroscopic analysis of the catalysts exhibits molecular nature of the complex after 2 h bulk electrolysis, morphological study reveals that the newly generated copper cluster is the real active site during the catalytic reactions.
N-doped Cu2O with the tunable Cu0 and Cu+ sites for selective CO2 electrochemical reduction to ethylene

Yao Shen,Liuqing Qian,Qianqian Xu,Shilun Wang,Yong Chen,Hengxia Lu,Yu Zhou,Jiexu Ye,Jingkai Zhao,Xiang Gao,Shihan Zhang

DOI: https://doi.org/10.1016/j.jes.2024.03.012

Abstract:The electrochemical carbon dioxide reduction reaction (CO2RR) to high value-added fuels or chemicals driven by the renewable energy is promising to alleviate global warming. However, the selective CO2 reduction to C2 products remains challenge. Cu-based catalyst with the specific Cu0 and Cu+ sites is important to generate C2 products. This work used nitrogen (N) to tune amounts of Cu0 and Cu+ sites in Cu2O catalysts and improve C2-product conversion. The controllable Cu0/Cu+ ratio of Cu2O catalyst from 0.16 to 15.19 was achieved by adjusting the N doping amount using NH3/Ar plasma treatment. The major theme of this work was clarifying a volcano curve of the ethylene Faraday efficiency as a function of the Cu0/Cu+ ratio. The optimal Cu0/Cu+ ratio was determined as 0.43 for selective electroreduction CO2 to ethylene. X-ray spectroscopy and density functional theory (DFT) calculations were employed to elucidate that the strong interaction between N and Cu increased the binding energy of NCu bond and stabilize Cu+, resulting in a 92.3% reduction in the potential energy change for *CO-*CO dimerization. This study is inspiring in designing high performance electrocatalysts for CO2 conversion.
Boosting CO2 electrocatalytic reduction to ethylene via hydrogen-assisted C-C coupling on Cu2O catalysts modified with Pd nanoparticles

Xianmeng Song,Wanfeng Xiong,Haoxian He,Duanhui Si,Linzhe Lü,Yuhang Peng,Qiaorong Jiang,Yanjie Wang,Yanping Zheng,Zi-Ang Nan,Qiuxiang Wang,Mingshu Chen,Rong Cao,Feng Ru Fan

DOI: https://doi.org/10.1016/j.nanoen.2024.109275

IF: 17.6

2024-04-01

Nano Energy

Abstract:Direct electrochemical conversion of CO2 to C2H4 is a promising technology for high-value chemical synthesis. However, challenges arise from competing hydrogen evolution reactions (HER) and the formation of undesired C1 products. In this study, we successfully engineered palladium nanoparticles (Pd NPs) with hydrogen storage capabilities on the Cu2O interface. This strategic modification effectively controls hydrogen states at the interface, leading to simultaneous HER inhibition and a significant increase in C2H4 selectivity. Detailed insights into the reaction mechanism were obtained through in-situ infrared spectroscopy, in-situ X-ray diffraction (XRD) and controlled experiments, offering a molecular-level understanding of the reaction mechanism. The interface-modified Pd NPs provided stable *H intermediates during the reaction process, effectively suppressing HER. Furthermore, the direct bonding between Pd and Cu interfaces increases charge density at the copper sites. These copper sites, in conjunction with the Pd-H sites, activate *CO at the Pd-Cu interface, forming stable *CHO intermediates. This enhances the coupling of *CHO and *CO intermediates, resulting in a remarkable increase in the C2H4/H2 production rate from 0.4 to 2.0 after Pd NPs modification, with a high faradaic efficiency of up to 46%. Our work presents a promising approach for designing copper-based CO2 reduction catalysts with outstanding activity and selectivity.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Copper-tetracyanoquinodimethane-derived copper electrocatalysts for highly selective carbon dioxide reduction to ethylene

Xuewei Huang,Dawei Wang,Shuhao Yan,Pengfei An,Jianyu Han,Zhiyu Guo,Xinwei Li,Zhongjun Chen,Lin Chang,Siyu Lu,Zhiyong Tang

DOI: https://doi.org/10.1007/s12274-022-4446-8

IF: 9.9

2022-06-09

Nano Research

Abstract:As one of the most promising CO 2 utilization techniques, electrochemical CO 2 reduction has recently received considerable attention. Cu is a unique electrocatalyst that can convert CO 2 to value-added multi-carbon chemicals. Nevertheless, Cu catalysts are always limited by the poor selectivity and stability. Here, we report that using copper-tetracyanoquinodimethane (CuTCNQ) derived Cu nanoparticles as efficient electrocatalysts for conversion of CO 2 to ethylene characteristic with high selectivity and stability, showing 56% Faradaic efficiency (FE) to C 2 H 4 at −1.3 V vs. reversible hydrogen electrode (RHE). Upon the electrochemical CO 2 reduction, CuTCNQ slowly reconstructs to Cu nanoparticles with abundant grain boundaries and residual Cu + on the surface. Theoretical calculation and operando characterization disclose that both as-formed Cu nanoparticle grain boundaries and residual Cu + endow the catalyst with high selectivity toward ethylene. Furthermore, during the reconstruction of CuTCNQ to Cu nanoparticles, the grain boundaries Cu surface is slowly refreshed by continual addition of Cu atoms, thus inhibiting the surface passivation and guaranteeing the electrocatalytic stability.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Low‐coordination Nanocrystalline Copper‐based Catalysts through Theory‐guided Electrochemical Restructuring for Selective CO2 Reduction to Ethylene

Wensheng Fang,Ruihu Lu,Fu-Min Li,Dan Wu,Kaihang Yue,Chaohui He,Yu Mao,Wei Guo,Bo You,Fei Song,Tao Yao,Ziyun Wang,Bao Yu Xia

DOI: https://doi.org/10.1002/anie.202319936

2024-02-21

Angewandte Chemie International Edition

Abstract:Revealing the dynamic reconstruction process and tailoring advanced copper (Cu) catalysts is of paramount significance for promoting the conversion of CO2 into ethylene (C2H4), paving the way for carbon neutralization and facilitating renewable energy storage. In this study, we initially employed density functional theory (DFT) and molecular dynamics (MD) simulations to elucidate the restructuring behavior of a catalyst under electrochemical conditions and delineated its restructuring patterns. Leveraging insights into this restructuring behavior, we devised an efficient, low-coordination copper-based catalyst. The resulting synthesized catalyst demonstrated an impressive Faradaic efficiency (FE) exceeding 70% for ethylene generation at a current density of 800 mA cm-2. Furthermore, it showed robust stability, maintaining consistent performance for 230 hours at a cell voltage of 3.5 V in a full-cell system. Our research not only deepens the understanding of the active sites involved in designing efficient carbon dioxide reduction reaction (CO2RR) catalysts but also advances CO2 electrolysis technologies for industrial application.

chemistry, multidisciplinary
Copper‐Based Catalysts for Electrochemical Reduction of Carbon Dioxide to Ethylene

Xiao Chen,Yunxia Zhao,Jiayi Han,Yunfei Bu

DOI: https://doi.org/10.1002/cplu.202200370

2023-01-05

ChemPlusChem

Abstract:Electrochemical reduction of CO2 into high energy density multi‐carbon chemicals or fuels (e.g., ethylene) via new renewable energy storage has extraordinary implications for carbon neutrality. Copper (Cu)‐based catalysts have been recognized as the most promising catalysts for the electrochemical reduction of CO2 to ethylene (C2H4) due to their moderate CO adsorption energy and moderate hydrogen precipitation potential. However, the poor selectivity, low current density and high overpotential of the CO2RR into C2H4 greatly limit its industrial applications. Meanwhile, the complex reaction mechanism is still unclear, which leads to blindness in the design of catalysts. Herein, we systematically summarized the latest research, proposed possible conversion mechanisms and categorized the general strategies to adjust of the structure and composition for CO2RR, such as tip effect, defect engineering, crystal plane catalysis, synergistic effect, nanoconfinement effect and so on. Eventually, we provided a prospect of the future challenges for further development and progress in CO2RR. Previous reviews have summarized catalyst designs for the reduction of CO2 to multi‐carbon products, while lacking in targeting C2H4 alone, an important industrial feedstock. This review mainly aims to provide a comprehensive understanding for the design strategies and challenges of electrocatalytic CO2 reduction to C2H4 through recent researches and further propose some guidelines for future design of copper‐based catalysts for electroreduction of CO2 to C2H4 field.

chemistry, multidisciplinary
Enhanced CO 2 Electroreduction to ethylene on Cu nanocube coated with nitrogen-doped carbon shell in-situ electro-derived from metal-organic framework

Na Zhang,Yunlong Zhang

DOI: https://doi.org/10.1016/j.cej.2024.156694

IF: 15.1

2024-10-18

Chemical Engineering Journal

Abstract:Electrochemical CO 2 reduction reaction (CO 2 RR) to ethylene is one of the most promising technologies to achieve efficient use of carbon resources and sustainable development, in which the development of an efficient and stable electrocatalyst is particularly important. In this work, we develop a catalyst in situ electro-derived from Cu-based MOF for CO 2 RR to ethylene. We prepared nano Cu-MOF by microwave synthesis and supported it on a Cu foil substrate as a working electrode (denoted as MOF/Cu foil). During in situ electrolysis, Cu-MOF was converted into a highly dispersed nitrogen-doped carbon-coated Cu nanocube (denoted as Cu-cube/CN), which inhibited particle agglomeration and enhanced active site exposure. At a potential of −1.15 V vs. RHE, the Faradaic efficiency (FE) of the Cu-cube/CN catalyst for ethylene is 49.6 %, significantly higher than that of the original Cu foil electrode and Cu-MOF supported on the gas diffusion layer (GDL) prepared working electrode (denoted as MOF/GDL). In situ attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) and density functional theory (DFT) calculations studies indicate that due to the electron-donating ability of the CN coating, the adsorption of *CO is enhanced, increasing the *CO coverage, lowering the reaction free energy of *CO dimerization, promoting C-C coupling and ethylene generation. This work provides new insights for the development of efficient and stable electrocatalysts for CO 2 RR-to-ethylene production.

engineering, chemical, environmental
Sr 2+ -Doped CuO Nanoribbons with the Hydrophobic Surface Enabling CO 2 Electroreduction to Ethane

Yan Hu,Jiahui Zhu,Nannan Chen,Xinyue Zheng,Xingyue Zhang,Zheng Chen,Zhengcui Wu

DOI: https://doi.org/10.1021/acs.inorgchem.3c02746

IF: 4.6

2023-09-30

Inorganic Chemistry

Abstract:Electrochemical reduction of carbon dioxide to value-added multicarbon (C(2+)) products is a promising way to obtain renewable fuels of high energy densities and chemicals and close the carbon cycle. However, the difficulty of C-C coupling and complexity of the proton-coupled electron transfer process greatly hinder CO(2) electroreduction into specific C(2+) products with high selectivity. Here, we design an electrocatalyst of Sr-doped CuO nanoribbons with a hydrophobic surface for CO(2)...

chemistry, inorganic & nuclear
Atomically Dispersed Ni Anchored on Polymer-Derived Mesh-Like N-doped Carbon Nanofibers As an Efficient CO 2 Electrocatalytic Reduction Catalyst

Cao Tai,Lin Rui,Liu Shoujie,Cheong Weng-Chon Max,Li Zhi,Wu Konglin,Zhu Youqi,Wang Xiaolu,Zhang Jian,Li Qiheng,Liang Xiao,Fu Ninghua,Chen,Wang Dingsheng,Peng Qing,Li Yadong

DOI: https://doi.org/10.1007/s12274-022-4076-1

IF: 9.9

2022-01-01

Nano Research

Abstract:Efficient electroreduction of CO 2 into CO and other chemicals turns greenhouse gases into fuels and value-added chemicals, holding great promise for a closed carbon cycle and the alleviation of climate changes. However, there are still challenges in the large-scale application of CO 2 electroreduction due to the sluggish kinetics. Herein we develop a self-assembly strategy to synthesize a highly efficient CO 2 reduction electrocatalyst with atomically dispersed Ni-N 4 active centers anchored on polymer-derived mesh-like N-doped carbon nanofibers (Ni-N 4 /NC). The Ni-N 4 /NC exhibits high selectivity for CO 2 reduction reaction with CO Faradaic efficiency (CO FE) above 90% over a wide potential range from −0.6 to −1.0 V vs. RHE. The catalyst reaches a maximum CO FE up to 98.4% at −0.8 V with a TOF of 1.28 × 10 5 h −1 and Tafel slope of 113 mV·dec −1 . The catalyst also exhibits remarkable stability, with little change in current density and CO FE over a 10-hour durability test at −0.8 V vs. RHE. This method provides a new route for the synthesis of highly efficient CO 2 reduction electrocatalyst.
Integration of Cobalt Phthalocyanine, Acetylene Black and Cu2O Nanocubes for Efficient Electroreduction of CO2 to C2H4

Jilin Liu,Kai Yu,Zhiyuan Qiao,Qianlong Zhu,Hong Zhang,Jie Jiang

DOI: https://doi.org/10.1002/cssc.202300601

IF: 8.4

2023-07-26

ChemSusChem

Abstract:Suppressing side reactions and simultaneously enriching key intermediates during CO2 reduction reaction (CO2RR) has been a challenge. Here, we proposed a tandem catalyst (Cu2O NCs‐C‐Copc) consisting of acetylene black, cobalt phthalocyanine (Copc) and Cuprous oxide nanocubes (Cu2O NCs) for efficient CO2 to ethylene (C2H4) conversion. Density‐functional theory (DFT) calculation combined with experimental verification demonstrated that Copc can provide abundant CO to nearby copper sites, while acetylene black successfully reduces the formation energies of key intermediates, leading to enhanced C2H4 selectivity. X‐ray photoelectron spectroscopy (XPS) and potentiostatic tests indicated that the catalytic stability of Cu2O NCs‐C‐Copc was significantly enhanced compared with Cu2O NCs. Finally, the industrial application prospect of the catalyst was evaluated using gas diffusion electrolyzers. The FEC2H4of Cu2O NCs‐C‐Copc can reach to 58.4% at ‐1.1V vs. RHE in 0.1 M KHCO3 and 70.3% at ‐0.76Vvs. RHE in 1.0 M KOH. This study sheds new light on the design and development of highly efficient CO2RR tandem catalytic systems.

chemistry, multidisciplinary,green & sustainable science & technology
Cu–Ni Alloy Nanoparticles Anchored on Nitrogen-Doped Carbon Nanotubes for Efficient CO 2 Electroreduction to CO

Yi Ren,Yujia Bai,Genxiang Wang,Yijian Liu,Chuancheng Mou,Jiayu Chen,Baohuan Wei,Hui Wang,Yuhan Sun

DOI: https://doi.org/10.1021/acs.energyfuels.3c01006

IF: 4.6541

2023-06-09

Energy & Fuels

Abstract:Efficient conversion of CO2 to value-added fuels or chemicals using electricity from renewable sources is an appealing approach to realize carbon neutrality. Under this background, it is crucial to design efficient and low-cost catalysts for CO2 electroreduction. Herein, we fabricated an electrocatalyst with the structure of Cu–Ni alloy nanoparticles grown on nitrogen-doped carbon nanotubes (Cu x Ni/NCNT, x = 2.4, 1, and 0.36) for electrochemical CO2 reduction reaction (CO2RR) via a hydrothermal method followed by pyrolysis. The optimized CuNi/NCNT demonstrates a favorable CO2RR performance with a CO Faradaic efficiency (FECO) of 94.8% and a current density of 26.6 mA cm–2 at −0.9 V versus the reversible hydrogen electrode (vs RHE) in the H-cell, far superior to those of single metal counterparts. Density functional theory (DFT) calculations unravel that the Cu–Ni alloys possess much lower free energy changes for the formation of the key COOH* intermediate than those of the Cu metal, thereby facilitating CO2 reduction into CO. Additionally, the CO2RR performance of CuNi/NCNT was further evaluated in the gas diffusion electrode (GDE) involved in the flow cell to examine the practical application of the prepared catalyst, which can deliver a current density of 124.6 mA cm–2 with a FECO of 92.8% at −1.1 V vs RHE. This work enriches electrocatalysts for highly efficient CO2 electroreduction to CO.

energy & fuels,engineering, chemical
Nitrided copper-iron composite oxides derived from layered double hydroxides for enhanced carbon dioxide electroreduction to methane and formic acid

Dian Song,Jinqing He,Yiping Wang,Xuhui Zhao,Fazhi Zhang,Xiaodong Lei

DOI: https://doi.org/10.59400/esc.v2i2.369

2024-05-08

Abstract:The reduction of carbon dioxide into valuable chemical products is a promising solution to address carbon balance and energy issues. Herein, amorphous nitrided copper-iron oxides are prepared by gas-phase nitriding of CuFe-layered double hydroxide precursors with urea as a nitrogen source. The obtained materials show high activity for CO2 electroreduction to methane and formic acid, achieving a total Faraday efficiency of 74.7% at −0.7 V vs. RHE and exhibiting continuous 10 h durability in the H-cell. The uniformly distributed Cu+ sites act as active sites by losing electrons to activate CO2. During the CO2 electroreduction, CO2 is converted to *COOH via proton-electron coupling; *COOH combines directly with a proton in solution to produce the HCOOH product; and the other part of *COOH undergoes a protonated dehydration process to form the *CHO intermediate, which dehydrates again to form CH4. This study provides a new approach for designing CO2 electroreduction catalysts.
CuNi alloy nanoparticles embedded in N-doped carbon framework for electrocatalytic reduction of CO2 to CO

Tiantian Yang,Wenke Xie,Na Tian,Xuan-He Liu,Xing Zhang

DOI: https://doi.org/10.1016/j.jallcom.2022.164042

IF: 6.2

2022-05-01

Journal of Alloys and Compounds

Abstract:Electrochemical conversion of CO2 into renewable fuel offers a promising approach to address the rising greenhouse gas accumulation in the atmosphere. The exploration of low-cost and efficient electrocatalysts with high selectivity is of great importance for development of electrochemical CO2 reduction (ECO2R). Here, we presented a CuNi alloy catalyst embedded in the N-doped carbon framework (CuNi/NC) derived from a metal-organic framework (Cu/Ni/Zn-MOF). The optimized Cu0.543Ni1/NC achieved high Faraday efficiency of CO (>90%) in the wide potential range of − 0.3 V to − 0.8 V. The maximum efficiency of CO was 99.7% at − 0.6 V. This study provided a strategy to construct non-precious metal electrocatalysts with high CO selectivity in wide potential range.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Atomically dispersed Ni anchored on polymer-derived mesh-like N-doped carbon nanofibers as an efficient CO2 electrocatalytic reduction catalyst

Tai Cao,Rui Lin,Shoujie Liu,Weng-Chon Cheong,Zhi Li,Konglin Wu,Youqi Zhu,Xiaolu Wang,Jian Zhang,Qiheng Li,Xiao Liang,Ninghua Fu,Chen Chen,Dingsheng Wang,Qing Peng,Yadong Li

DOI: https://doi.org/10.1007/s12274-022-4076-1

IF: 9.9

2022-01-15

Nano Research

Abstract:Efficient electroreduction of CO2 into CO and other chemicals turns greenhouse gases into fuels and value-added chemicals, holding great promise for a closed carbon cycle and the alleviation of climate changes. However, there are still challenges in the large-scale application of CO2 electroreduction due to the sluggish kinetics. Herein we develop a self-assembly strategy to synthesize a highly efficient CO2 reduction electrocatalyst with atomically dispersed Ni-N4 active centers anchored on polymer-derived mesh-like N-doped carbon nanofibers (Ni-N4/NC). The Ni-N4/NC exhibits high selectivity for CO2 reduction reaction with CO Faradaic efficiency (CO FE) above 90% over a wide potential range from −0.6 to −1.0 V vs. RHE. The catalyst reaches a maximum CO FE up to 98.4% at −0.8 V with a TOF of 1.28 × 105 h−1 and Tafel slope of 113 mV·dec−1. The catalyst also exhibits remarkable stability, with little change in current density and CO FE over a 10-hour durability test at −0.8 V vs. RHE. This method provides a new route for the synthesis of highly efficient CO2 reduction electrocatalyst.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
High selective electrocatalytic reduction of carbon dioxide to ethylene enabled by regulating the microenvironment over Cu-Ag nanowires

Dehe Fan,Shiji Zhang,Yumeng Li,Hua Bin,Ruopeng Li,Yaqiang Li,Maozhong An,Peixia Yang,Jinqiu Zhang

DOI: https://doi.org/10.1016/j.jcis.2024.02.028

IF: 9.9

2024-05-01

Journal of Colloid and Interface Science

Abstract:Copper-based tandem catalysts are effective candidates for yielding multi-carbon (C2+) products in electrochemical reduction of carbon dioxide (CO2RR). However, these catalysts still face a significant challenge regarding in the low selectivity for the production of a specific product. In this study, we report a high selectivity of 77.8 %±2 % at -1.0 V (vs RHE) for the production of C2H4 by using a Cu88Ag12NW catalyst which is primarily prepared through a combined Cu-Ag co-deposition and wet chemical method, employing an attractive strategy focused on regulating the microenvironment over Cu-Ag nanowires. The experimental and computational studies show that the higher *CO coverage and lower intermediate adsorption energy are important reasons for achieving the high C2H4 selectivity of Cu88Ag12NW catalyst. Comsol simulation results indicate that dense nanowires exhibit a nano-limiting effect on OH- ions, thereby leading to an increase in local pH and promoting coupling reactions. The catalyst demonstrates no noticeable decrease in current density or selectivity even after 12 h of continuous operation. The Cu-Ag nanowire composite exhibits remarkable catalytic activity, superior faradaic efficiency, excellent stability, and easy synthesis, which highlights its significant potential for electro-reducing carbon dioxide into valuable products.

chemistry, physical
Electro-derived Cu-Cu2O nanocluster from LDH for stable and selective C2 hydrocarbons production from CO2 electrochemical reduction

Naveed Altaf,Shuyu Liang,Liang Huang,Qiang Wang

DOI: https://doi.org/10.1016/j.jechem.2019.12.013

IF: 13.1

2020-09-01

Journal of Energy Chemistry

Abstract:Recently, CO2 conversion by electrochemical tool into value-added chemicals has been considered as one of the most promising strategies to offer sustainable development in energy and environment. In this contribution, we investigated electro-derived composites from Cu-based layered double hydroxide (LDH) for CO2 electrochemical reduction. The Cu-Cu2O based nanocomposite (HPR-LDH) were derived by using electro-strategy from LDH having the stability up to 20 h and selectivity toward C2H4 with faraday efficiency up to 36% by significantly suppressing CH4 and H2 with respect to bulk Cu foil. A highly negative reduction potential derived catalyst (HPR-LDH) maintained long-term stability for the selective production of ethylene over methane, and a small amount of Cu2O was still observed on the catalyst surface after CO2 reduction reaction (CO2RR). Moreover, such unique strategy for electro-derived composite from LDH having small nanoparticles stacked each other grown on layered structure, would provide new insight to improve durability of OCu combination catalysts for CC coupling products during electrochemical CO2 conversion by suppressing HER. The XRD, SEM, ESR, and XPS analyses confirmed that the long-term ethylene selectivity of HPR-LDH is due to the presence of subsurface oxygen. The designed composite catalyst significantly enhances the stability and selectivity, and also decreases the over potential for CO2 electro-reduction. We predict that the new designed LDH 2D-derived composites may attract new insight for transition metal and may open up a new direction for known structural properties of selective catalyst synthesis regarding effective CO2 reduction reaction.

chemistry, physical,engineering, chemical, applied,energy & fuels
Efficient electrochemical reduction of carbon dioxide into ethylene boosted by copper vacancies on stepped cuprous oxide

Xiaona Ren,Xiangwen Zhang,Xingzhong Cao,Qingfa Wang

DOI: https://doi.org/10.1016/j.jcou.2020.01.018

IF: 7.7

2020-05-01

Journal of CO2 Utilization

Abstract:Electrochemical carbon dioxide (CO2) reduction powered by renewable energy source is a promising strategy for the sustainable carbon cycle, while the selectivity toward C2+ products is still a great challenge. Herein, a novel stepped cuprous oxide catalyst with abundant Cu vacancies (Cuv-Cu2O catalyst) is developed to enhance the selectivity and efficiency of CO2 conversion toward C2 products. This catalyst exhibits high C2H4 partial current density and production rate at a low overpotential benefiting from the stepped surface and the modified electronic structure by Cu vacancies. Furthermore, density functional theory calculations demonstrate that the Cu vacancy-enriched Cu2O surface ensures strong adsorption to *COH but weak affinities to *CO and *CH2 intermediates, which promotes CO2 electroreduction to C2H4 products. The enhanced selectivity of C2H4, accompanied with the Cu vacancies and Cu+ species, can remain stable during the long-term test. This study will provide guidance on designing efficient electrocatalysts for CO2 reduction towards hydrocarbon products.

engineering, chemical,chemistry, multidisciplinary

Claspin, a Chk1-regulatory protein, monitors DNA replication on chromatin independently of RPA, ATR, and Rad17.

A Cu2o-Derived Polymeric Carbon Nitride Heterostructured Catalyst For The Electrochemical Reduction Of Carbon Dioxide To Ethylene

Efficiently Electroreducing CO2 to Ethylene on Heterostructured CeO2/CuO

Unveiling the Synergistic Effect between Graphitic Carbon Nitride and Cu 2 O toward CO 2 Electroreduction to C 2 H 4

Electrocatalytic Reduction of CO2 to Ethylene by Molecular Cu-Complex Immobilized on Graphitized Mesoporous Carbon

N-doped Cu2O with the tunable Cu0 and Cu+ sites for selective CO2 electrochemical reduction to ethylene

Boosting CO2 electrocatalytic reduction to ethylene via hydrogen-assisted C-C coupling on Cu2O catalysts modified with Pd nanoparticles

Copper-tetracyanoquinodimethane-derived copper electrocatalysts for highly selective carbon dioxide reduction to ethylene

Low‐coordination Nanocrystalline Copper‐based Catalysts through Theory‐guided Electrochemical Restructuring for Selective CO2 Reduction to Ethylene

Copper‐Based Catalysts for Electrochemical Reduction of Carbon Dioxide to Ethylene

Enhanced CO 2 Electroreduction to ethylene on Cu nanocube coated with nitrogen-doped carbon shell in-situ electro-derived from metal-organic framework

Sr 2+ -Doped CuO Nanoribbons with the Hydrophobic Surface Enabling CO 2 Electroreduction to Ethane

Atomically Dispersed Ni Anchored on Polymer-Derived Mesh-Like N-doped Carbon Nanofibers As an Efficient CO 2 Electrocatalytic Reduction Catalyst

Integration of Cobalt Phthalocyanine, Acetylene Black and Cu2O Nanocubes for Efficient Electroreduction of CO2 to C2H4

Cu–Ni Alloy Nanoparticles Anchored on Nitrogen-Doped Carbon Nanotubes for Efficient CO 2 Electroreduction to CO

Nitrided copper-iron composite oxides derived from layered double hydroxides for enhanced carbon dioxide electroreduction to methane and formic acid

CuNi alloy nanoparticles embedded in N-doped carbon framework for electrocatalytic reduction of CO2 to CO

Atomically dispersed Ni anchored on polymer-derived mesh-like N-doped carbon nanofibers as an efficient CO2 electrocatalytic reduction catalyst

High selective electrocatalytic reduction of carbon dioxide to ethylene enabled by regulating the microenvironment over Cu-Ag nanowires

Electro-derived Cu-Cu2O nanocluster from LDH for stable and selective C2 hydrocarbons production from CO2 electrochemical reduction

Efficient electrochemical reduction of carbon dioxide into ethylene boosted by copper vacancies on stepped cuprous oxide