CT-dichtemessungen zur graduierung subkutaner fibrösen nach photonen-neutronen-therapie maligner speicheldrüsentumoren

H. Eich,P. Eich,M. Stuschke,R. Müller,H. Sack

DOI: https://doi.org/10.1007/BF02742346

1999-03-01

Abstract:

What problem does this paper attempt to address?

A new discrete variable structure control algorithm based on sliding mode prediction

Lingfei Xiao,Hongye Su,Xiaoyu Zhang,Jian Chu

DOI: https://doi.org/10.1109/ACC.2005.1470728

2005-01-01

Abstract:In this paper, a new discrete variable structure control design approach based on sliding mode prediction algorithm for a class of discrete-time systems is presented. By employing a special model to predict future sliding mode value and an ideal reaching law as reference sliding mode trajectory, and at the same time, combining feedback correction and rolling optimization method which are extensively applied on predictive control strategy, a discrete-time variable structure control law is constructed. Simulation results illustrate that the closed-loop system has desired performance, such as strong robustness, fast convergence and chattering elimination. © 2005 AACC.
Variable Structure Control with Sliding Mode Prediction for Discrete-Time Nonlinear Systems

Lingfei Xiao,Hongye Su,Xiaoyu Zhang,Jian Chu

DOI: https://doi.org/10.1007/s11768-006-5251-8

2006-01-01

Abstract:In this paper, a novel discrete variable structure control strategy based on sliding mode prediction for a class of nonlinear systems is presented. By introducing a sliding mode prediction model, the trajectory of the sliding mode follows the expected track of the proposed reaching law exactly. Simultaneously, the corresponding variable structure control law which realized receding horizon optimization and feedback correction is obtained. Simulation results illustrate that the closed-loop system has desired performance, such as strong robustness, fast convergence and chattering elimination
Adaptive Sliding Mode-Like Fuzzy Logic Control for High Order Nonlinear Systems

XY Zhang,HY Su,J Chu

DOI: https://doi.org/10.1109/isic.2003.1254736

2003-01-01

Abstract:A sliding mode-like fuzzy logic control (SMFC) algorithm for a class of high order nonlinear systems is presented. The fuzzy logic controller obtained is equivalent to a sliding mode controller. New adaptive laws for the parameters of the fuzzy logic system (FLS) are adopted in order to self-tune the so-called dead zone parameters. The robustness and the resistance ability to the external perturbations of systems are improved and the chattering of the sliding mode control (SMC) is eliminated. The simulation results of a numerical example show that the control algorithm is efficient and feasible.
A new adaptive sliding mode control of uncertain nonlinear systems

Zhitao Liu,Hongye Su,Shuwen Pan

DOI: https://doi.org/10.1002/asjc.657

IF: 2.4

2014-01-01

Asian Journal of Control

Abstract:In this paper, a new adaptive sliding mode control is proposed to control nonlinear systems with parametric uncertainties and matched and unmatched external disturbances. The proposed method first combines immersion and invariance (I&I) adaptive scheme with sliding mode control (SMC), which preserves the advantages of the two methods. The proposed method is different from the approach of combining the backstepping adaptive scheme and sliding mode control in the parameter estimation law, which allows for prescribed dynamics to be assigned to the estimation error and is easier to tune. Finally, the method is applied to control a class of power systems, and simulation results show the advantages of the proposed method.
Sliding Mode Prediction Based Control Algorithm for Discrete-Time Non-Linear Uncertain Coupled Systems.

L. Xiao,H. Su,J. Chu

DOI: https://doi.org/10.1080/00207170701447122

IF: 2.102

2007-01-01

International Journal of Control

Abstract:By introducing predictive control strategy into the design of sliding mode control (SMC), a novel SMC algorithm for a class of discrete-time non-linear uncertain coupled systems is presented in this paper. To enlighten by the recursive sliding mode approach, a special sliding mode prediction model (SMPM) is created at first. Then taking model mismatch into consideration, the error between the output of SMPM and the practical sliding mode value is used to make feedback correction for SMPM. Applying receding horizon optimization, the desired sliding mode control law which is a non-switching type, is obtained subsequently. The reachability of sliding mode is achieved by making predictive value of sliding mode track the expected sliding mode reference value. Due to feedback correction and receding horizon optimization, the influence of uncertainties can be compensated in time, strong robustness to matched or unmatched uncertainties is possessed. Theoretical analysis proves the closed-loop system is robustly stable, without requiring the known boundaries of uncertainties. Simulation results of a numerical example and a rotational inverted pendulum illustrate the validity of the proposed algorithm.
A Model Reference Adaptive Sliding Mode Control for the Position Control of Permanent Magnet Synchronous Motor.

Junfeng Jiang,Xiaojun Zhou,Wei Zhao,Wei Li

DOI: https://doi.org/10.1177/0959651820941954

2020-01-01

Abstract:A model reference adaptive sliding mode control for the position control of the permanent magnet synchronous motor is developed in this article. First of all, a fast sliding surface is designed to achieve faster convergence than the ordinary sliding mode control. Then, the adaptive laws are developed to make the control parameters, especially the switching gain, updated online. Therefore, the chattering can be reduced effectively and the disturbance can be rejected well. Finally, a reference model which produces an exponential decay curve is applied for the position error to follow. Thus, not only fast error convergence can be guaranteed, but also the dynamic process of the system response can be controlled easily by modifying the decay rate of the reference model. The proposed model reference adaptive sliding mode control scheme combines the advantages of the sliding mode control and the model reference adaptive control. Simulation and experimental results reveal that faster and more accurate performance with smoother control signal and better robustness is obtained compared with other methods. Also, the model reference adaptive sliding mode control method can maintain good performance when the system inertia or the position reference varies in a wide range.
Sliding Mode Based Controller for Magnetostrictive Actuator

XinXin Li,Wen Wang,Zichen Chen

DOI: https://doi.org/10.1109/robio.2006.340110

2007-01-01

Abstract:Magnetostrictive actuator, for its merits of relatively low voltage and high force, has been increasingly applied in many applications, such as vibration control, aviation, positioner, etc. At low drive level, magnetostrictive actuator presents linear relation between strain or displacement and input voltage or input current, while non-linear appears when applied moderate or high drive level. To achieve accurate control for high drive level, non-linear, including saturation and hysteresis, must be compensated. Sliding mode control, a robust control scheme, can handle these non-linear. As magnetostrictive actuator modelled in Jiles-Atherton model, the relation of magnetic field H and bulk magnetization M, hysteresis, is divided into anhysteresis and deviation from anhysteresis. Saturation can be compensated by inversion of anhysteresis (free-hysteresis) and then, hysteresis, represented as the deviation from anhysteresis, is compensated with sliding mode control. In section I, introduction of magnetostrictive actuator characters and compensation methods for its non-linear is presented. Then, Jiles-Atherton model based on domain wall theory is introduced in section II. Next, the design procedures of sliding-mode controller are given. Control law for GMA position tracking is derived as well. Simulation and its results are shown in Section IV. And the conclusion is made at Section V.
Model‐free Adaptive Integral Sliding Mode Constrained Control with Modified Prescribed Performance

Xiuwei Huang,Zhiyan Dong,Feng Zhang,Lihua Zhang

DOI: https://doi.org/10.1049/cth2.12440

IF: 2.67

2023-01-01

IET Control Theory and Applications

Abstract:In this work, a novel model-free adaptive integral sliding model constrained control strategy with modified prescribed performance is proposed for nonlinear nonaffine systems via full-form dynamic linearization (FFDL). Firstly, a generalized nonlinear nonaffine system with external disturbance is transformed into an affine system via the FFDL method, which contains a linearly parametric term affine to the control input and preceding output data, and an unknown nonlinear time-varying term. Then, an adaptive estimation method and a discrete-time extended state observer (DESO) are used to estimate the pseudo gradient (PG) vector and lumped uncertainties, respectively. Furthermore, an integral sliding mode control scheme containing a modified prescribed performance function and an anti-windup compensator is designed to keep the output tracking error in the prescribed bound without causing any asymmetric offset error in the steady-state and to suppress the influence of input saturation. Simulation results demonstrate the superiority of the proposed control scheme.
Prescribed performance based data-driven adaptive sliding mode control for discrete-time nonlinear systems

Dong Liu,Yi-Jie Yang,Li-Ying Hao

DOI: https://doi.org/10.1016/j.jfranklin.2024.01.021

IF: 4.246

2024-01-15

Journal of the Franklin Institute

Abstract:This research explores the control problem of discrete-time nonlinear systems with prescribed performance utilizing the data-driven method. Firstly, the equivalent data model of the system is constructed employing the full-form dynamic linearization technique. Secondly, a novel error transformation function is proposed to transform the constrained tracking error into the unconstrained equivalent error. Subsequently, the new sliding function is established to achieve the original tracking error converges to the predetermined asymmetric domain. In contrast to existing methods, the proposed approach has a more straightforward controller structure. Additionally, the introduction of pade approximation simplifies the theoretical analysis. Finally, the superiority of the proposed scheme is validated through simulation results on the single-link manipulator system.

automation & control systems,engineering, electrical & electronic, multidisciplinary,mathematics, interdisciplinary applications
Model-Free Adaptive Sensing and Control for a Piezoelectrically Actuated System

Hung-Yi Chen,Jin-Wei Liang

DOI: https://doi.org/10.3390/s101210545

IF: 3.9

2010-01-01

Sensors

Abstract:Since the piezoelectrically actuated system has nonlinear and time-varying behavior, it is difficult to establish an accurate dynamic model for a model-based sensing and control design. Here, a model-free adaptive sliding controller is proposed to improve the small travel and hysteresis defects of piezoelectrically actuated systems. This sensing and control strategy employs the functional approximation technique (FAT) to establish the unknown function for eliminating the model-based requirement of the sliding-mode control. The piezoelectrically actuated system’s nonlinear functions can be approximated by using the combination of a finite number of weighted Fourier series basis functions. The unknown weighted vector can be estimated by an updating rule. The important advantage of this approach is to achieve the sliding-mode controller design without the system dynamic model requirement. The update laws for the coefficients of the Fourier series functions are derived from a Lyapunov function to guarantee the control system stability. This proposed controller is implemented on a piezoelectrically actuated X-Y table. The dynamic experimental result of this proposed FAT controller is compared with that of a traditional model-based sliding-mode controller to show the performance improvement for the motion tracking performance.
Prescribed performance based model-free adaptive sliding mode constrained control for a class of nonlinear systems

Weiming Zhang,Dezhi Xu,Bin Jiang,Tinglong Pan

DOI: https://doi.org/10.1016/j.ins.2020.06.061

IF: 8.1

2021-01-01

Information Sciences

Abstract:<p>To tackle the trajectory tracking problem and achieve high control accuracy in many actual nonlinear systems with unknown dynamics, a novel prescribed performance based model-free adaptive sliding mode constrained control (SMCC) strategy is studied which relies on the input/output data of plant rather than the specific model information via a pseudo partial derivative (PPD) parameter. Firstly, two approaches are introduced for PPD estimation, i.e., an observer-based adaptive algorithm, and an algorithm based on the stochastic configuration network approximating the controlled plant model, upon which the realtime control including PPD construction are carried out. Then, the prescribed performance is introduced in the model-free adaptive SMCC scheme as a prescribed range for the output tracking error. Meanwhile, an anti-windup compensation signal is employed to suppress the actuator saturation that commonly exists in many actual nonlinear systems. In addition, the stability analysis of the control system is presented to verify the rationality of the prescribed performance. Finally, simulations are carried out for both a linear induction motor and a battery energy storage system to demonstrate the effectiveness of the proposed control strategy.</p>

computer science, information systems
Adaptive Nonsingular Fast Terminal Sliding Mode Control for Shape Memory Alloy Actuated System

Xiaoguang Li,Wenzhuo Zhi,Enming Shi,Xiaoliang Fan,Ming Zhao,Bi Zhang

DOI: https://doi.org/10.3390/act13090367

IF: 2.6

2024-09-20

Actuators

Abstract:Due to its high power-to-weight ratio, low weight, and silent operation, shape memory alloy (SMA) is widely used as a muscle-like soft actuator in intelligent bionic robot systems. However, hysteresis nonlinearity and multi-valued mapping behavior can severely impact trajectory tracking accuracy. This paper proposes an adaptive nonsingular fast terminal sliding mode control (ANFTSMC) scheme aimed at enhancing position tracking performance in SMA-actuated systems by addressing hysteresis nonlinearity, uncertain dynamics, and external disturbances. Firstly, a simplified third-order actuator model is developed and a variable gain extended state observer (VGESO) is employed to estimate unmodeled dynamics and external disturbances within finite time. Secondly, a novel nonsingular fast terminal sliding mode control (NFTSMC) law is designed to overcome singularity issues, reduce chattering, and guarantee finite-time convergence of the system states. Finally, the ANFTSMC scheme, integrating NFTSMC with VGESO, is proposed to achieve precise position tracking for the prosthetic hand. The convergence of the closed-loop control system is validated using Lyapunov's stability theory. Experimental results demonstrate that the external pulse disturbance error of ANFTSMC is 8.19°, compared to 19.21° for the comparative method. Furthermore, the maximum absolute error for ANFTSMC is 0.63°, whereas the comparative method shows a maximum absolute error of 1.03°. These results underscore the superior performance of the proposed ANFTSMC algorithm.

engineering, mechanical,instruments & instrumentation
Optimization-based Adaptive Neural Sliding Mode Control for Nonlinear Systems with Fast and Accurate Response under State and Input Constraints

Jinna Fu,Fanghao Huang,Zheng Chen

DOI: https://doi.org/10.1016/j.jfranklin.2022.07.010

IF: 4.246

2022-01-01

Journal of the Franklin Institute

Abstract:The high-performance control requires the system to be stable, fast and accurate simultaneously. However, various systems (e.g., motors, industrial robots) generally face technical challenges such as nonlinearities, uncertainties, external disturbances and physical constraints, which make it difficult to reach the hardware potential of the systems to track the desired trajectories when satisfying the high-performance control requirements. Therefore, take a two-order nonlinear system for example, an optimization-based adaptive neural sliding mode control based on a two-loop control structure is proposed in this paper, where the outer and inner loops are designed separately to achieve different control requirements. Namely, the outer loop is designed as a model predictive control (MPC)-based optimization problem, which can optimize the desired trajectories to meet the state and input constraints, and maximize the converging speed of transient response as fast as possible, and the inner loop is designed with a recurrent neural network (RNN)-based adaptive neural sliding mode controller, which can guarantee the tracking of the replanned desired trajectories from outer loop as accurate as possible. The stability of the system is guaranteed by Lyapunov theorem, the optimal tracking performance is achieved under nonlinearities, uncertainties, external disturbances and physical constraints, and comparative simulation with a motor system is carried out to verify the effectiveness and superiority of the proposed approach.
Prescribed Performance Model-Free Adaptive Integral Sliding Mode Control for Discrete-Time Nonlinear Systems

Dong Liu,Guang-Hong Yang

DOI: https://doi.org/10.1109/TNNLS.2018.2881205

Abstract:This paper studies the data-driven prescribed performance control (PPC) problem for a class of discrete-time nonlinear systems in the presence of tracking error constraints. By using the equivalent dynamic linearization technique and constructing a novel transformed error strategy, an adaptive integral sliding mode controller is designed such that the tracking error converges to a predefined neighborhood. Meanwhile, the presented control scheme can effectively ensure that the convergence rate is less than a predefined value and maximum overshoot is not smaller than a preselected constant. In addition, better tracking performance can be achieved by regulating the design parameters appropriately, which is more preferable in the practical application. Contrary to the existing PPC results, the new proposed control law does not use either the plant structure or any knowledge of system dynamics. The efficiency of the proposed control approach is shown with two simulated examples.
Adaptive Fuzzy Sliding-Mode Control for the Ti6al4v Laser Alloying Process

Hung-Yi Chen,Shiuh-Jer Huang

DOI: https://doi.org/10.1007/s00170-003-1742-7

2004-01-01

Abstract:It is well known that surface alloying quality may vary significantly with respect to process parameter variation. Thus a feedback control system is required to monitor the operating parameters for yielding a good quality control. Since this multi-input and multi-output (MIMO) system has nonlinear coupling and time-varying dynamic characteristics, it is very difficult to establish an accurate process model for designing a model-based controller. Hence an adaptive fuzzy sliding-mode controller (AFSMC) which combines an adaptive rule with fuzzy and sliding-mode control is employed in this study. It has an on-line learning ability for responding to a system's nonlinear and time-varying behaviours. Two adaptive fuzzy sliding-mode controllers are designed for tuning the laser power and the traverse velocity simultaneously to tackle the absorptivitiy and geometrical variations of the work pieces. The simulation results show that good surface lapping performance is achieved by using this intelligent control strategy.
Adaptive radial basis function sliding-mode controller for the molten steel level control of strip casting processes

Hung-Yi Chen,Shiuh-Jer Huang

DOI: https://doi.org/10.1109/ICIEA.2010.5515513

2010-01-01

Abstract:Since the twin-roll strip casting process has the properties of nonlinear uncertainty and time-varying characteristics, it is difficult to establish an accurate process model for designing a model-based controller to monitor the strip quality. In this paper, a model-free adaptive radial basis function sliding-mode controller is developed to overcome this problem. The proposed control strategy is based on a neural network structure combined with sliding-mode control scheme. An adaptive rule is employed to on-line adjust the weights of radial basis functions by using the reaching condition of a specified sliding surface. It has on-line learning ability for responding to the system's nonlinear and time-varying behaviors. Since this model-free controller has simple control structure and small number of control parameters, it is easy to implement. Simulation results based on semi-experimental system dynamic model and parameters are executed to show the control performance of the proposed intelligent controller.
Discrete‐time extended state observer‐based model‐free adaptive constrained sliding mode control with modified prescribed performance via CFDL and PFDL

Xiuwei Huang,Zhiyan Dong,Feng Zhang,Lihua Zhang

DOI: https://doi.org/10.1002/asjc.3206

IF: 2.4

2023-08-19

Asian Journal of Control

Abstract:To tackle the trajectory tracking problem and achieve high control accuracy in many actual nonlinear systems with unknown dynamics and input saturation, a novel discrete‐time extended state observer‐based model‐free adaptive constrained sliding mode control with modified prescribed performance is investigated via compact‐form dynamic linearization (CFDL) and partial‐form dynamic linearization (PFDL). Firstly, the original non‐affine system is turned into an affine one comprising an unknown nonlinear term and a linearly parametric term affine to the input via both PFDL and CFDL. Then, a discrete‐time extended state observer (DESO) is used to estimate the lumped disturbance containing the unknown nonlinear time‐varying term and the term relevant to the estimation error of pseudo partial derivative (PPD) parameter. Furthermore, a modified prescribed performance function is introduced in the model‐free adaptive sliding mode control scheme to keep the output tracking error in the prescribed bound without causing any asymmetric offset error in the steady‐state. Meanwhile, to suppress the influence of input saturation on the control system, an anti‐windup compensator is used. Finally, rigorous theoretical analyses show the robust convergence of the tracking error via the proposed CFDL and PFDL‐based methods under external disturbances. Simulations verify the superiority of the modified prescribed performance function, DESO, and anti‐windup compensator in the proposed method. Also, the effects of the PFDL‐based method and the CFDL‐based one are compared during the simulation.

automation & control systems
Adaptive Sliding-Mode Control with Self-Tuning Fuzzy Compensation for a Piezoelectric-Actuated X-Y-Z Table

Jin-Wei Liang,Hung-Yi Chen,Chia-Zung Wu

DOI: https://doi.org/10.4028/www.scientific.net/amm.130-134.1898

2010-01-01

Abstract:This paper aims to develop and implement intelligent control for a X-Y-Z three-dimensional table using linear ultrasonic motors as the actuators. Functional approximation technique (FAT) is integrated with the sliding-mode control design to capture the unknown system dynamics and release the requirement of mathematical modeling. In order to deal with the approximation error and the uncertainties of the system, an adaptive fuzzy sliding-mode controller (AFSMC) is used as a compensation of the FAT-based sliding-mode control. Lyapunov stability theory is applied to assure the closed-loop stability and design the updating laws for weighting coefficients of Fourier series and fuzzy tuning parameters. Experimental results indicate that FAT-based sliding-mode control augmented with AFSMC compensation (FA+AFSMC) performs better than the solely FAT-based sliding-mode control.
Piezo-Actuated Micro-Drilling Process Control by Using an Adaptive Sliding Controller with Fuzzy Compensation

Hung Yi Chen

DOI: https://doi.org/10.4028/www.scientific.net/amm.284-287.1899

2013-01-01

Applied Mechanics and Materials

Abstract:A model-free adaptive sliding controller with fuzzy compensation is proposed for a piezo-actuated micro-drilling process control in this paper. Due to the system’s nonlinear and time-varying characteristics, this control strategy employs the functional approximation technique to establish the unknown function for releasing the model-based requirement of the sliding mode control. In addition, a fuzzy scheme with online learning ability is augmented to compensate for the finite approximation error and facilitate the controller design. The important advantages of this approach are to achieve the sliding mode controller design without the system dynamic model requirement and release the trial-and-error work of selecting approximation function. The Lyapunov direct method is applied to find adaptive laws for updating coefficients in the approximating series and tuning parameter in the fuzzy compensator to guarantee the control system stability.
Radial Basis Function Sliding-Mode Control For The Laser Alloying Process

hungyi chen,shiuhjer huang

DOI: https://doi.org/10.1007/978-1-84628-988-0_71

2007-01-01

Abstract:Since the Laser alloying process system has nonlinear coupling and time varying dynamic characteristics, it is very difficult to establish an accurate process model for designing model-based controller. Hence, an adaptive radial basis function sliding-mode control is proposed by combining the advantages of adaptive neural network and sliding-mode control strategies. It has on-line learning ability to deal with the system's nonlinear and time-varying uncertainties by adjusting the control parameters. Two adaptive radial basis function sliding-mode controllers are designed for tuning the Laser power and the traverse velocity simultaneously to tackle the absorptivtiy and geometrical variations of the work pieces. The simulation results show that the good surface lapping performance is achieved by using this intelligent control strategy.

CT-dichtemessungen zur graduierung subkutaner fibrösen nach photonen-neutronen-therapie maligner speicheldrüsentumoren

A new discrete variable structure control algorithm based on sliding mode prediction

Variable Structure Control with Sliding Mode Prediction for Discrete-Time Nonlinear Systems

Adaptive Sliding Mode-Like Fuzzy Logic Control for High Order Nonlinear Systems

A new adaptive sliding mode control of uncertain nonlinear systems

Sliding Mode Prediction Based Control Algorithm for Discrete-Time Non-Linear Uncertain Coupled Systems.

A Model Reference Adaptive Sliding Mode Control for the Position Control of Permanent Magnet Synchronous Motor.

Sliding Mode Based Controller for Magnetostrictive Actuator

Model‐free Adaptive Integral Sliding Mode Constrained Control with Modified Prescribed Performance

Prescribed performance based data-driven adaptive sliding mode control for discrete-time nonlinear systems

Model-Free Adaptive Sensing and Control for a Piezoelectrically Actuated System

Prescribed performance based model-free adaptive sliding mode constrained control for a class of nonlinear systems

Adaptive Nonsingular Fast Terminal Sliding Mode Control for Shape Memory Alloy Actuated System

Optimization-based Adaptive Neural Sliding Mode Control for Nonlinear Systems with Fast and Accurate Response under State and Input Constraints

Prescribed Performance Model-Free Adaptive Integral Sliding Mode Control for Discrete-Time Nonlinear Systems

Adaptive Fuzzy Sliding-Mode Control for the Ti6al4v Laser Alloying Process

Adaptive radial basis function sliding-mode controller for the molten steel level control of strip casting processes

Discrete‐time extended state observer‐based model‐free adaptive constrained sliding mode control with modified prescribed performance via CFDL and PFDL

Adaptive Sliding-Mode Control with Self-Tuning Fuzzy Compensation for a Piezoelectric-Actuated X-Y-Z Table

Piezo-Actuated Micro-Drilling Process Control by Using an Adaptive Sliding Controller with Fuzzy Compensation

Radial Basis Function Sliding-Mode Control For The Laser Alloying Process