Improved Responses with Multitaper Spectral Analysis for Magnetotelluric Time Series Data Processing: Examples from Field Data

Matthew J. COMEAU,Rafael RIGAUD,Johanna PLETT,Michael BECKEN,Alexey KUVSHINOV

DOI: https://doi.org/10.1111/1755-6724.15226

2024-12-01

Acta Geologica Sinica - English Edition

Abstract:Acta Geologica Sinica - English Edition, Volume 98, Issue S1, Page 14-17, November 2024.

geosciences, multidisciplinary

What problem does this paper attempt to address?

Multi-station Superposition for Magnetotelluric Signal

Li Jiang,Yixian Xu

DOI: https://doi.org/10.1007/s11200-012-1129-z

2013-01-01

Studia Geophysica et Geodaetica

Abstract:Extending the observation time to increase the length of time series is the most effective but consuming way to improve the signal-to-noise ratio of magnetotelluric (MT) signal. Multi-station superposition technique at present proposed for magnetotelluric survey aims to attenuate random noises by multi-station synchronously observation at one site. The idea stems from seismic array stacking and is mathematically verified corresponding to a linear random noise model. The multi-station superposition can be done in time and frequency domains. A practical testing measurement was performed by setting three stations on vertexes of an equilateral triangle and a single station on centre of the triangle in desert area of the Tarim basin, western China. The results of the testing data demonstrate the effectiveness of the proposed scheme. The method has great potentials for long-period MT survey in dramatically reducing the observation time and suppressing the static shift caused by near-surface inhomogeneities.
Comparisons of the Magnetotelluric experimental results by Multi‐site remote reference and Multi‐site superposition

yixian xu,li jiang,yaoguo li,xiong li,xiaohong meng

DOI: https://doi.org/10.1190/1.3659040

2012-01-01

Abstract:Summary The multi-site long period Magnetotelluric(MT) data was processed to estimate apparent resistivity by the method of the multi-site electric and magnetic field data respective superposition. And this MT data was also processed by multi-site remote reference. It could be seen that the multisite superposition method could increase the number of time series blocks, and not extend the record time. Therefore, this method could effectively improve the long period MT data quality.
Separation of magnetotelluric signals based on refined composite multiscale dispersion entropy and orthogonal matching pursuit

Xian Zhang,Jin Li,Diquan Li,Yong Li,Bei Liu,Yanfang Hu

DOI: https://doi.org/10.1186/s40623-021-01399-z

2021-03-23

Abstract:Abstract Magnetotelluric (MT) data processing can increase the reliability of measured data. Traditional MT data denoising methods are usually applied to entire MT time-series, which results in the loss of useful MT signals and a decrease of imaging accuracy of electromagnetic inversion. However, targeted MT noise separation can retain part of the signal unaffected by strong noise and enhance the quality of MT responses. Thus, we propose a novel method for MT noise separation that uses the refined composite multiscale dispersion entropy (RCMDE) and the orthogonal matching pursuit (OMP) algorithm. First, the RCMDE is extracted from each segment of the MT data. Then, the RCMDEs for each segment are input to the fuzzy c-mean (FCM) clustering algorithm for automatic identification of the MT signal and noise. Next, the OMP method is utilized to remove the identified noise segments independently. Finally, the reconstructed signal consists of the denoised signal segments and the identified useful signal segments. We conducted simulation experiments and algorithm evaluations on electromagnetic transfer function (EMTF) data, simulated data and measured sites. The results indicate that the RCMDE can improve the stability of multiscale dispersion entropy (MDE) and multiscale entropy (ME) by analyzing the characteristics of the signal samples library, effectively distinguishing MT signals and noise. Compared with the existing technique of denoising entire time series, the proposed method uses the RCMDE as characteristic parameter and uses the OMP algorithm for noise separation, simplifies the multi-feature fusion, and improves the accuracy of signal-noise identification. Moreover, the denoising efficiency is accelerated, and the MT response in the low-frequency band is greatly improved.
Two-dimensional Inversion of CSAMT Data and Three-Dimensional Geological Mapping for Groundwater Exploration in Tongkeng Area, Hunan Province, China

Kouao Laurent Kouadio,Yixian Xu,Chun-ming Liu,Zakaria Boukhalfa

DOI: https://doi.org/10.1016/j.jappgeo.2020.104204

IF: 1.845

2020-01-01

Journal of Applied Geophysics

Abstract:Controlled source audio-magnetotelluric (CSAMT) is an indirect and effective geophysical prospecting method in subsurface prospecting. Although CSAMT investigation tools are equipped with new techniques, it must be noted that the models obtained still do not automatically decipher the reality of groundwater in bedrock with very high resistivity contrasts. Our study proposed a new CSAMT data processing scheme, which combined the 2D modeling and 3D visualization for groundwater exploration in Tongkeng area, Hunan Province, China. To directly highlight exploitable groundwater, we used the open-source and the OCCAM2D inversion software, coupled with the geological information of the area to define the 3D imaging with emphasizing on the network of producing fractures. We deployed three CSAMT profiles with transverse magnetic (TM) mode recorded on 21 frequencies (8192 Hz to 8 Hz). The data were filtered, pre-processed and carefully analyzed from station to station. Analysis of the apparent resistivity and phase maps show the conductive zones (<150 Ωm) and resistive zones (> 500 Ωm) separated by transition zones (150 to 500 Ωm). The 2D models and stacked sections show discontinuities of fractures marked by two major faults and a main fracture in the zone interconnected by minor fractures. A 3D geological map was obtained from the result of the best models of the different lines. The ITER2DAT function was used to export the data from OCCAM2D inversion and then display it to array and depth channels data for each station. Geological and borehole ZK01 data were used to build pseudo stratigraphic drillholes based on the range of very low (<10 Ωm) to high values resistivity structures (>1500 Ωm). The 3D view shows stratigraphic discontinuity that is between carbonaceous formation and the metamorphic granites. The intruded Devonian limestone layer, which is the potential water tank, and the carbonate vein layer are constantly heated by the geothermal gradient of the area.
Geophysical exploration with audiofrequency natural magnetic fields

V. F. Labson,A. Becker,H. F. Morrison,U. Conti

DOI: https://doi.org/10.1190/1.1441940

IF: 3.264

1985-04-01

Geophysics

Abstract:Experience with the AFMAG method has demonstrated that an electromagnetic exploration system using the Earth’s natural audiofrequency magnetic fields as an energy source is capable of mapping subsurface electrical structure in the upper kilometer of the Earth’s crust. We resolved the limitations of this method by adapting the tensor analysis and remote reference noise bias removal techniques from the geomagnetic induction and magnetotelluric methods to computation of the tippers. After a thorough spectral study of the natural magnetic fields, we designed lightweight magnetic field sensors capable of measuring the magnetic field throughout the year. We also built a digital acquisition and processing system with the ability to provide audiofrequency tipper results in the field. This new instrumentation was used in a study of the Mariposa, California site previously mapped with AFMAG. This study once again demonstrates the usefulness of natural magnetic field data in mapping an electrically conductive body. Reoccupation of one of the sites in several different seasons proves the high level of repeatability of these data. As well as being repeatable, the tensor data provide additional information on the geometry of the conductive body. Different electrical conductivity features can be distinguished using a broad band of frequencies.

geochemistry & geophysics
Recognition and separation of magnetotelluric strong noise based on temporal convolutional network and K-SVD dictionary learning

Zhi Yang,Jingtian Tang,Yishu Sun,Jianqi Li,Minsheng Yang,Yuexing Zhang,Xiao Xiao

DOI: https://doi.org/10.1093/jge/gxae096

2024-09-26

Journal of Geophysics and Engineering

Abstract:The magnetotelluric (MT) method has been widely applied in deep energy resource surveys with the advantage of large-depth exploration and sensitivity to electrical differences. However, the observed data of the MT method are exceptionally sensitive to artificial noise. To improve the survey effectiveness of the MT method in a strong electromagnetic (EM) interference environment. We introduce the Temporal Convolutional Network (TCN) into the processing of MT data and propose a recognition and separation method for MT strong noise. First, to obtain a precise signal-to-noise recognition model, we train the TCN network by measuring MT samples that are artificially labeled. Then the trained network is used to separate the signal to be processed into high-quality segments and noise-contaminated segments. Finally, K-Singular Value Decomposition (K-SVD) dictionary learning is applied to perform signal-to-noise separation of the recognized noise-contaminated segments to obtain the noise-free signal segments. The noise-free signal segments are recombined with the recognized high-quality signal segments to obtain a complete high-quality signal. We apply the proposed method to the processing of field data collected in Tongling City, Anhui Province, China. Compared with the results of manual labeling, the recognition accuracy of the TCN network reaches more than 98.2%, which is significantly higher than 93.6% of the Convolutional Neural Network (CNN). The apparent resistivity and phase curves obtained by our method are consistent with the results of the MT remote reference method as a standard method, which eloquently proves that the proposed method has good validity and reliability.

geochemistry & geophysics
Mathematical morphology filtering and noise suppression of magnetotelluric sounding data

TANG Jing-Tian,LI Jin,XIAO Xiao,ZHANG Lin-Cheng,Lü Qing-Tian

DOI: https://doi.org/10.6038/j.issn.0001-5733.2012.05.036

2012-01-01

Abstract:Mathematical morphology filtering is a new non-linear filtering method. The basic principle of morphology filtering was introduced in this paper. Considering that magnetotelluric signals are non-linear, non-stationary, and non-minimum phase and taking into account the properties of structuring elements, we proposed a new method based on mathematical morphology filtering for noise suppression of magnetotelluric sounding data. In order to effectively suppress the noise interference of target signal and correct for statistical dominance phenomenon, we chose reasonable structuring elements and the combination of morphological open-closing and close-opening to construct the combination generalized morphology filtering. The filtering is composed of cascade positive and negative structuring elements, and its purpose is to suppress noise of actual magnetotelluric sounding data. Experimental results indicate that the proposed method is feasible and can effectively eliminate larger scale disturbance and baseline drift of magnetotelluric. In addition, the proposed method can better restore the original features of magnetotelluric, amend the statistical dominance phenomenon produced by standard morphological operators, and has better precision. The method is faster and has potential advantages, which provides a new way for massive magnetotelluric signal and strong interference separation in ore district, moreover, it has broad application prospects.
An Evaluation of Robust Remote Reference and Parametric Magnetotelluric Transfer Function Estimation.

Xinyi Xu,Mark D. Butala

DOI: https://doi.org/10.1109/igarss47720.2021.9553606

2021-01-01

Abstract:The conventional approach to estimate the magnetotelluric (MT) impedance tensor from surface measured magnetic and geomagnetic electrical field time series relies on a frequency domain formulation and measurements from a remote reference site to mitigate correlated, systematic noise. Guided by system identification principles, we propose a parametric, time-domain approach that potentially offers greater statistical efficiency and noise resilience. Based on a study from measured data, we demonstrate that the parametric approach can yield estimates of the MT impedance with as little as one day of data and without the need of a remote reference site.
The Impact of Magnetic Field Temporal Sampling on Modeled Surface Electric Fields

Matthew A. Grawe,Jonathan J. Makela,Mark D. Butala,Farzad Kamalabadi

DOI: https://doi.org/10.1029/2018sw001896

2018-01-01

Space Weather

Abstract:Descriptions of the surface magnetic-to-electric field relationship, using magnetotelluric impedance tensors, have seen refinement in recent years. Correspondingly, models of geomagnetically induced currents flowing in power line conductors using input from more fundamental observables (e.g., the surface magnetic field or solar wind drivers) have become more sophisticated. Magnetometer data used for purposes of surface electric field modeling typically have cadences between 1 s and 1 min. Using 1-D and 3-D magnetotelluric impedance tensors, we quantify the effect of magnetometer cadence on modeled peak surface electric fields during the 22 June 2015, 17 March 2015, and 2 October 2013 geomagnetic storms. It is shown that 1-min magnetometer data sampling leads to median biases in the peak electric field of 10-20% magnitude attenuation and 2-17 degrees in direction (depending on the storm) across the United States using the Fernberg 1-D conductivity models and 11-26% (0.9-8 degrees) using the 3-D impedance tensors derived from the USArray magnetotelluric survey. The largest 10% of attenuations almost entirely occur near low-resistivity subsurface structures in the western and eastern United States, reaching a 50% median attenuation during the 17 March 2015 event. It is concluded that cadence, local geology, and the spectral content of the geomagnetic field all play a significant role in the bias.
Improved controlled source audio‐frequency magnetotelluric method apparent resistivity pseudo‐sections based on the frequency and frequency–spatial gradients of electromagnetic fields

Ming Zhang,Colin G. Farquharson,Changsheng Liu

DOI: https://doi.org/10.1111/1365-2478.13059

2021-01-16

Geophysical Prospecting

Abstract:Although most electromagnetic (EM) data can be inverted to actual resistivity, ways of quickly getting a real‐time interpretation of a data set are still valuable. Such methods are useful when we are testing instrumentation or assessing data quality during a survey, or when we need to get a general understanding of the geological structure during a field survey. Apparent resistivity is a good way to satisfy these desires. However, one of the disadvantages of apparent resistivities is that the traditional apparent resistivity formulations are poor at recognizing boundaries, mainly because abnormal responses get stretched into deeper parts of the image (a shadow effect). In order to improve the recognition ability of boundaries, we propose improved apparent resistivity pseudo sections based on the formulae for the frequency and frequency‐spatial gradients of the fields in the far field region of frequency‐domain CSAMT surveys. The new pseudo sections are found to be better than those produced from a traditional method when applied to a number of 3‐D examples. The performance of this apparent resistivity method is closely related to using an appropriate transmitter‐receiver distance: when a proper value is used, good results can be obtained in which the horizontal locations of vertical boundaries and the positions of top and bottom boundaries can be identified clearly. Finally, the usefulness of the proposed method for practical applications is evaluated with a field‐data example, for which the results of the proposed apparent resistivity imaging method are compared with traditional apparent resistivities, as well as with the results from a 2D inversion of DC resistivity data from the same survey line and with what is known about the geology of the area. This comparison demonstrates the improved capabilities of the new apparent resistivities over traditional approaches, including an improved capability to accurately reveal the bottoms of targets.This article is protected by copyright. All rights reserved

geochemistry & geophysics
Imaging the Architecture of Mineral Systems and the Pathways of Ore‐forming Fluids across Mongolia with Magnetotellurics

Matthew J. COMEAU,Rafael RIGAUD,Erdenechimeg BATMAGNAI,Shoovdor TSERENDUG,Sodnomsambuu DEMBEREL,Michael BECKEN,Alexey KUVSHINOV

DOI: https://doi.org/10.1111/1755-6724.15225

2024-12-01

Acta Geologica Sinica - English Edition

Abstract:Acta Geologica Sinica - English Edition, Volume 98, Issue S1, Page 11-13, November 2024.

geosciences, multidisciplinary
A de-noising method of magnetotelluric signals based on the generalized S-transform

Jianhua Cai

DOI: https://doi.org/10.1016/j.jappgeo.2024.105349

IF: 1.845

2024-04-01

Journal of Applied Geophysics

Abstract:The generalized S-transform has excellent time-frequency resolution capability. It can effectively demonstrate the non-stationary characteristics of signals and the dynamic changes in energy. This provides the conditions for denoising in the time-frequency domain. The magnetotelluric (MT) survey method is often affected by various artificial noises, and these noises are very prominent in certain frequency bands. To address this problem, a method based on the generalized S transform is proposed to de-noise MT data. The generalized S transform is used to improve the time-frequency localization of the different signal components, meanwhile the electromagnetic noise can be conveniently suppressed in the time-frequency domain. Simulated signals and measured MT signals contaminated by common sinusoidal and triangular wave interference are processed. The results were compared with those of the Wavelet threshold method. Results show that the presented method is more conducive to the identification and suppression of electromagnetic noise and shows better de-noising results than the Wavelet threshold method. After de-noising, the useful information of the MT signal affected by strong interference is highlighted, which provides favorable conditions for power spectrum and impedance estimation in the future. Further, the response parameter curve calculated from the de-noised data becomes stable. The proposed method provides a new alternative for de-noising of MT signals, especially those with low signal-to-noise ratios.

geosciences, multidisciplinary,mining & mineral processing
Research on a Multiscale Denoising Method for Low Signal-to-Noise Magnetotelluric Signal

Zhenyu Guo,Xiangbo Gong,Jiangtao Han,Lijia Liu,Yihao Wu,Fanwen Meng,Jianqiang Kang

DOI: https://doi.org/10.1109/tgrs.2022.3229160

IF: 8.2

2022-12-28

IEEE Transactions on Geoscience and Remote Sensing

Abstract:Magnetotelluric (MT) impedance estimation requires a high signal-to-noise ratio (SNR). When low-SNR data are processed, it is difficult to obtain a robust MT response. In this article, based on the spectral characteristics of noise sequences, the influence of the scale and waveform of noise sequences on impedance estimates is studied, and a multiscale denoising method for MT signals is proposed. This method applies the improved complete ensemble empirical mode decomposition with adaptive noise (ICEEMDAN) to decompose the multiscale noise into different components, and then, the influence of noise on the spectrum is evaluated through the spectrum obtained by the short-time Fourier transform (STFT) of each component. This ICEEMDAN- and STFT-based MT (ICMT) denoising method can, thus, filter out the small-scale abrupt noise that has a great impact on the MT response and retain the large-scale smooth noise that has a small impact to suppress noise and reduce the loss of the effective signal at the same time. Various noises are added to a pure MT signal to test the performance of ICMT. It is demonstrated that ICMT has a small loss of effective signals and can obtain MT response results with small recovery errors, even when the SNR of the signal is as low as −20 dB. Finally, ICMT is applied to process the heavy noisy MT data in an ore concentration area. The results suggest that ICMT can effectively suppress noise, and robust impedance estimates can be obtained.

imaging science & photographic technology,remote sensing,engineering, electrical & electronic,geochemistry & geophysics
A Study on Magnetotelluric Characteristics of Magmatic Geothermal Systems

Jianhui Li,Wenbo Zhang,Mingjun Li,Ying Liu

DOI: https://doi.org/10.3390/en15249282

IF: 3.2

2022-12-08

Energies

Abstract:The Magnetotelluric (MT) method is a widely used and effective method of exploring geothermal resources because it can reveal geological information at a great depth and is cost effective. In order to further improve the reliability and rationality of MT data interpretation, MT responses for a typical hydrothermal system and a hot dry rock (HDR) and partial melting system are investigated by a finite-element (FE) forward modeling approach based on unstructured tetrahedral grids that can handle with complex-shaped geothermal systems. These two geothermal models, designed by the 3ds Max software, are comprised of a clay cap, a reservoir, and a heat source, and are discretized into tetrahedral elements by TetGen software. The results show that the apparent resistivities at the broadband of frequencies are mainly affected by the shallow low-resistivity clay cap due to its strong shielding effects, and the induction arrows effectively reflect the boundary of the clay cap. The conductive heat-conducting path and heat source (1 S/m) considered in the models of the HDR and partial melting system could cause significant changes in the apparent resistivities and induction arrows at low frequencies. It suggests that in addition to the apparent resistivities, the induction arrows should be taken into consideration in MT data processing and inversion for better lateral resolution when exploring geothermal resources.

energy & fuels
Reducing Reliance on Observation Duration of Magnetotelluric Impedance Estimation With an Improved Instantaneous Spectrum-Based Method

Zhenyu Guo,Jiangtao Han,Lijia Liu,Yihao Wu,Jiaxin Hou,Xiangbo Gong

DOI: https://doi.org/10.1109/tgrs.2024.3386646

IF: 8.2

2024-04-30

IEEE Transactions on Geoscience and Remote Sensing

Abstract:The natural electromagnetic field observed in magnetotelluric (MT) sounding is nonstationary, making it challenging to obtain reliable frequency spectrum information using the Fourier transform. In practical measurements, long-duration observations of the electromagnetic field signal are often required to obtain accurate low-frequency impedance, resulting in significant technical difficulties and high economic costs. We provide a method for estimating MT impedance using the instantaneous spectrum obtained with variational mode decomposition (VMD). By replacing the Fourier spectrum with the instantaneous spectrum, this approach mitigates the requirement for extended signal observation time when estimating low-frequency impedance. Compared to previous studies on impedance estimation, we analyze the influence of signal period number on spectrum reliability, emphasizing the effectiveness and reliability of instantaneous spectrum in dealing with nonstationary signals. The feasibility of obtaining low-frequency MT impedance from short-duration observations is also discussed. The proposed method employs VMD to extract the instantaneous spectrum and utilizes hat matrix (a projection matrix) and signal noise separation (SNS) techniques to suppress noise interference in the spectrum, thereby enhancing the reliability of the instantaneous spectrum and the resulting impedance estimates. The method is applied to synthetic data with added noise and real data collected in the Qilian region of China, and the results are compared with those obtained by using different methods. The experiments demonstrate that the VMD instantaneous spectrum reliably reflects the spectral characteristics of the signal, exhibiting minimal changes as the signal duration decreases. Therefore, this method can obtain robust low-frequency impedance even with a short MT time series.

engineering, electrical & electronic,imaging science & photographic technology,remote sensing,geochemistry & geophysics
Method for obtaining response functions from noisy magnetotelluric data using frequency-domain independent component analysis

T. Kasaya,H. Ichihara,Shinya Sato,T. Goto

DOI: https://doi.org/10.1190/GEO2018-0792.1

2020-10-04

Abstract:The magnetotelluric (MT) method has been used for visualizing subsurface resistivity structures and more recently for monitoring resistivity changes. However, electromagnetic data often include cultural noise, which can cause errors in the estimation of MT response functions and subsurface resistivity structure analysis. Frequency-domain independent component analysis (FDICA) offers advantages for MT data processing particularly because this method can extract hidden components in the observed data. These components can be decomposed into natural MT signals and cultural noise so that the noise effect in the recovered MT data is reduced. FDICA is applied to MT data acquired at the Kakioka Magnetic Observatory in Japan. The apparent resistivity and phase curves are obtained with small estimated errors between periods of 7 and 12,000 s, although the length of the time-series data is limited. The curves are smoother than those obtained using a conventional method. Various types of synthetic noise are added to the time series at Kakioka to test the noise-reduction performance of FDICA for MT data with high noise contamination. The results demonstrate that FDICA can be used to estimate MT response functions with high accuracy even under conditions in which more than half of the time-series data are contaminated by noise.

Geology,Environmental Science,Engineering,Computer Science
A novel Fourier domain scheme for three‐dimensional magnetotelluric modelling in anisotropic media

Shikun Dai,Qingrui Chen,Kun Li,Jiaxuan Ling,Dongdong Zhao

DOI: https://doi.org/10.1111/1365-2478.13643

2024-11-26

Geophysical Prospecting

Abstract:SUMMARY This study presents a novel algorithm that combines the Lorenz gauge equations with the Fourier domain technique to simulate magnetotelluric responses in three‐dimensional conductivity structures with general anisotropy. The method initially converts the Helmholtz equations governing vector potentials into one‐dimensional differential equations in the wave number domain via the horizontal two‐dimensional Fourier transform. Subsequently, a one‐dimensional finite element method employing quadratic interpolation is applied to obtain three five‐diagonal linear equation systems. Upon solving these equations, the spatial domain fields are obtained via the inverse Fourier transform. This process guarantees the computational efficiency, memory efficiency and high parallelization of the algorithm. Moreover, an anisotropic medium iteration operator guarantees stable convergence of the method. The correctness, competence and applicability of the algorithm are verified using some synthetic models. The results demonstrate that the new method is efficient and performs well in anisotropic undulating terrain and complex structures. Compared to other Fourier domain methods and the latest edge‐based finite element algorithm, the proposed method exhibits superior computing performance. Finally, the impact of the Euler angles on the magnetotelluric responses is analysed.

geochemistry & geophysics
3D CSAMT modelling in anisotropic media using edge-based finite-element method

Guoli He,Tiaojie Xiao,Yun Wang,Guangjie Wang

DOI: https://doi.org/10.1080/08123985.2019.1565914

2019-01-02

Exploration Geophysics

Abstract:Controlled-source audio-frequency magnetotellurics (CSAMT) is an important geophysical technique. Numerous studies have shown that the electrical anisotropy in the Earth cannot be ignored because it would probably lead to misinterpretations of electromagnetic data. It is necessary and meaningful to study CSAMT responses in three-dimensional (3D) electrical anisotropic media; therefore, we have developed an edge-based finite element method for 3D CSAMT forward modelling in generalised anisotropic media. The total electric field in this approach is decomposed into a primary electric field and a secondary electric field, and the Galerkin weighted residuals method is adopted to obtain the variational equation. The accuracy of this algorithm was initially validated by comparing solutions with those obtained in previous work on a 3D arbitrary anisotropic model. We then studied the responses of an oblique source as well as equatorial and axial configurations and the tensor source for anomalies with different Euler’s angles. Several meaningful conclusions can be derived from this work and a synthetic model is developed; the results also confirm the validity of previous conclusions. This study shows that a tensor source is necessary for a CSAMT survey in 3D anisotropic media, and the anisotropic parameters of anomalies have complex and significant influences on CSAMT responses.

geochemistry & geophysics
Denoising of magnetotelluric data using K‐SVD dictionary training

Jin Li,Yiqun Peng,Jingtian Tang,Yong Li

DOI: https://doi.org/10.1111/1365-2478.13058

2021-01-16

Geophysical Prospecting

Abstract:<p>Magnetotelluric (MT) is one of the mainstream exploration geophysical methods, which plays a vital role in studying deep geological structures and finding deep hidden blind ore bodies. The seriousness of human electromagnetic noise causes a large number of abnormal waveforms in the time series of measured MT data, and the data can no longer objectively reflect the underground electrical distribution. In this work, we propose a MT time series data processing method based on K‐SVD dictionary training. First, a training matrix and a to‐be‐processed matrix are built with the pending MT signals. Then, let the K‐SVD dictionary training process the training matrix to obtain an over‐complete dictionary reflecting the characteristics of the pending signal. Lastly, Orthogonal Matching Pursuit (OMP) is combined with an over‐complete dictionary updated in real‐time to sparsely represent the to‐be‐processed matrix and remove human electromagnetic interference in the signal. Experimental results show that the method can update the over‐complete dictionary in real‐time according to the pending MT signals, realize the self‐learning signal‐noise separation of MT signals, and effectively retain low‐frequency information. Compared with Method of Directions (MOD) dictionary learning, Remote Reference (RR) method, and OMP method, the reconstructed data of the proposed method can more accurately reflect the underground electrical structure information.</p><p>This article is protected by copyright. All rights reserved</p>

geochemistry & geophysics
A gradient scaling scheme for the three-dimensional magnetotelluric inversion with galvanic distortion correction

Wenxin Kong,Nian Yu,Xin Li,Zheng Chen,Hongye Zhang,Xuejian Zhang,Huang Chen,Enci Wang,Tianyang Li

DOI: https://doi.org/10.1109/tgrs.2023.3293883

IF: 8.2

2023-01-01

IEEE Transactions on Geoscience and Remote Sensing

Abstract:Galvanic distortion (GD) resulting from near-surface heterogeneity has long been considered a major impediment to the accurate interpretation of magnetotelluric (MT) data. As this GD effect is approximated by a real tensor, it can be solved numerically in the 3-D MT inversion. To achieve this goal in a practical way, we have implemented the inverse solution of both the GD and resistivity parameters in the widely used software package ModEM. To address the gradient domination problem of the distortion parameter over resistivity, a scaling scheme is proposed to balance their separate roles in the total gradient. Two synthetic datasets of the Block2-3D and the oblique conductor (OC) models provided in the ModEM package were distorted and then used to validate the new implementation. Synthetic inversions demonstrate that the artifacts introduced by fitting the GD effect can be removed and the regional structure is better resolved. A field data inversion test was conducted on the MT data from the Red River Fault zone and its adjacent areas on the southern margin of the Tibetan Plateau. Using the distortion-free phase tensor, we show that the new inversion significantly removes the GD artifacts from the shallower structure. It obtained a slightly different crustal structure and a clearer delineation of the upper mantle structure compared to the previous study.

imaging science & photographic technology,remote sensing,engineering, electrical & electronic,geochemistry & geophysics

Improved Responses with Multitaper Spectral Analysis for Magnetotelluric Time Series Data Processing: Examples from Field Data

Multi-station Superposition for Magnetotelluric Signal

Comparisons of the Magnetotelluric experimental results by Multi‐site remote reference and Multi‐site superposition

Separation of magnetotelluric signals based on refined composite multiscale dispersion entropy and orthogonal matching pursuit

Two-dimensional Inversion of CSAMT Data and Three-Dimensional Geological Mapping for Groundwater Exploration in Tongkeng Area, Hunan Province, China

Geophysical exploration with audiofrequency natural magnetic fields

Recognition and separation of magnetotelluric strong noise based on temporal convolutional network and K-SVD dictionary learning

Mathematical morphology filtering and noise suppression of magnetotelluric sounding data

An Evaluation of Robust Remote Reference and Parametric Magnetotelluric Transfer Function Estimation.

The Impact of Magnetic Field Temporal Sampling on Modeled Surface Electric Fields

Improved controlled source audio‐frequency magnetotelluric method apparent resistivity pseudo‐sections based on the frequency and frequency–spatial gradients of electromagnetic fields

Imaging the Architecture of Mineral Systems and the Pathways of Ore‐forming Fluids across Mongolia with Magnetotellurics

A de-noising method of magnetotelluric signals based on the generalized S-transform

Research on a Multiscale Denoising Method for Low Signal-to-Noise Magnetotelluric Signal

A Study on Magnetotelluric Characteristics of Magmatic Geothermal Systems

Reducing Reliance on Observation Duration of Magnetotelluric Impedance Estimation With an Improved Instantaneous Spectrum-Based Method

Method for obtaining response functions from noisy magnetotelluric data using frequency-domain independent component analysis

A novel Fourier domain scheme for three‐dimensional magnetotelluric modelling in anisotropic media

3D CSAMT modelling in anisotropic media using edge-based finite-element method

Denoising of magnetotelluric data using K‐SVD dictionary training

A gradient scaling scheme for the three-dimensional magnetotelluric inversion with galvanic distortion correction