Abstract:Thanks to the actuation flexibility of their systems, electric vehicles with individual powertrains, including in-wheel and on-board motors, are a very popular research topic amongst various types of electrified powertrain architectures. The introduction of the individual electric powertrain provides great capacity for improvement of the vehicle's energy efficiency and control performance. However, it also poses tremendous challenges concerning vehicle safety, due to the complex system dynamics and cooperation mechanisms between multiactuators.For an electric vehicle with independently controlled motors, because of design and manufacturing factors, the steady-state error of each motor output torque, and the flexibilities and nonlinear backlash of left and right drivetrains, can be different. This results in asymmetrical output characteristics of electric powertrain systems on the same axle. Therefore, during a normal straight-line deceleration, an unexpected yaw moment would be generated, affecting vehicle's directional stability.In this study, a novel method of directional stability enhancement through robust control of blended braking of an electric vehicle equipped with four individual on-board motors during normal straight-line deceleration are studied. System models, including the vehicle dynamics, tire, electric powertrain, and hydraulic brake models, are developed. Mechanisms of directional instability of the electric vehicle during straight-line braking are analyzed. To further improve the electric vehicle's safety and performance, robust control algorithm of blended braking is developed using nonlinear sliding mode approach. Simulations of the proposed control strategy is carried out under straight-line braking. The results demonstrate that the developed approach is advantageous over the baseline, with respect to both the directional stability and regeneration efficiency, thus validating the feasibility and effectiveness of the controller synthesis.

Collaborative control of trajectory tracking and braking stability of intelligent vehicles with a blowout tire

Active rectifying control of vehicle with tire blowout based on adaptive fuzzy proportional–integral–derivative control

Research on intelligent optimal allocation control strategy for stability and braking of heavy tyre blowout vehicle

Gain-scheduling robust control for a tire-blow-out road vehicle

Tire Blowout Motion Control of Over-actuated Ground Vehicles: A Hierarchical Framework

Stability Control For Tire Blowout Vehicle Based On Brake By Wire System Considering Driver Operation

Integrated control of braking-yaw-roll stability under steering-braking conditions

Study on Integrated Control of Vehicle Yaw and Rollover Stability Using Nonlinear Prediction Model

Shared control strategy based on trajectory following and driver intention optimization

A novel vehicle dynamics stability control algorithm based on the hierarchical strategy with constrain of nonlinear tyre forces

A Three-Dimensional Dynamics Control Framework of Vehicle Lateral Stability and Rollover Prevention via Active Braking With MPC.

Trajectory control for tire burst vehicle using the standalone and roll interconnected active suspensions with safety-comfort control strategy

Integrated longitudinal and lateral control for autonomous vehicles with active load transfer strategy at the handling limits

The tyre blow-out vehicle lateral pulling control using an active suspension system with comfort-lateral trajectory based control scheme.

Coordinated Longitudinal and Lateral Stability Improvement for Electric Vehicles Based on a Real-Time NMPC Strategy

Model predictive control for three-axle trucks during tire blowout on expressway based on equivalent chassis

Coupled Lateral and Longitudinal Control for Trajectory Tracking, Lateral Stability, and Rollover Prevention of High-Speed Automated Vehicles Using Minimum-Time Model Predictive Control

Robust Control of Regenerative and Hydraulic Brakes for Enhancing Directional Stability of an Electric Vehicle During Straight-Line Braking

Dynamic Coordinated Control Strategy of Autonomous Vehicles During Emergency Braking under Split Friction Conditions

Trajectory Tracking Control for Four-Wheel Independently Driven Electric Vehicle Based on Model Predictive Control and Sliding Model Control

Switched model predictive controller for path tracking of autonomous vehicle considering rollover stability