Abstract:Abstract Mode distortion induced by stimulated Raman scattering (SRS) has become a new obstacle for the further development of high-power fiber lasers with high beam quality. Here, an approach for effective suppression of the SRS-induced mode distortion in high-power fiber amplifiers has been demonstrated experimentally by adjusting the seed power (output power of seed source) and forward feedback coefficient of the rear port in the seed source. It is shown that the threshold power of the SRS-induced mode distortion can be increased significantly by reducing the seed power or the forward feedback coefficient. Moreover, it has also been found that the threshold power is extremely sensitive to the forward feedback power value from the rear port. The influence of the seed power on the threshold power can be attributed to the fact that the seed power plays an important role in the effective length of the gain fiber in the amplifier. The influence of the forward feedback coefficient on the threshold power can be attributed to the enhanced SRS configuration because the end surface of the rear port together with the fiber in the amplifier constitutes a half-opening cavity. This suppression approach will be very helpful to further develop the high-power fiber amplifiers with high beam quality.

Pattern effect suppression of pulse signals based on pre-signal control method

Effects of the pulse shape on the chirp compensation by using the semiconductor laser amplifiers

Vector-dispersion Compensation and Pulse Pedestal Cancellation in a Femtosecond Nonlinear Amplification Fiber Laser System.

Compensation of Dispersion-Induced Power Fading with Adjustment-Free Operation

Digital Predistortion of 75-110Ghz W-Band Frequency Multiplier for Fiber Wireless Short Range Access Systems

Transient Effect to Small Duty-Cycle Pulse in Cascaded Erbium-Doped Fiber Amplifier System

Influence of Bragg Reflection of Chirped Tilted Fiber Bragg Grating on Raman Suppression in High-Power Tandem Pumping Fiber Amplifiers.

Compared Propagation Characteristics of Superluminal and Slow Light in SOA and EDFA Based on Rectangle Signals

TUNABLE FIBER FABRY-PEROT FILTER FOR OPTICAL CARRIER-SUPPRESSION AND SINGLE-SIDEBAND MODULATION IN RADIO OVER FIBER LINKS

Signal Shaping Based on Phase Pre-Modulation in Fiber Transmission Systems

Fast and Slow Light Property Improvement in Erbium-Doped Amplifier

Tunable Group Velocity Of Light Propagation And Its Application

Reduction Of Patterning Effects In Soa-Based Wavelength Converters By Combining Cross-Gain And Cross-Absorption Modulation

Mitigation of Pattern-Dependent Effect in SOA at O-Band by Using DSP

Suppressing scattering-induced nanosecond pre-pulses in Ti:sapphire multi-pass amplifiers

Stimulated Brillouin Scattering Suppression and Optical Parametric Amplification in Highly Nonlinear Optical Fiber

All-optical pulse power editing technique applied to controllable production of the pulse dynamic patterns in fiber lasers

Pedestal-Free 10-Ghz Pulse Compression Using Comb-Like Dispersion Profiled Fibers and Its Application in 40-Gb/s Otdm Systems

Effective suppression of mode distortion induced by stimulated Raman scattering in high-power fiber amplifiers

Nonlinear spectral compression in high-power narrow-linewidth polarization maintaining fiber amplifiers for SBS suppression

293 W, GHz narrow-linewidth, polarization maintaining nanosecond fiber amplifier with SBS suppression employing simultaneous phase and intensity modulation