Abstract:Reducing carbon emissions is an urgent problem around the world while facing the energy and environmental crises. Whatever progress has been made in renewable energy research, efforts made to energy-saving technology is always necessary. The energy consumption from fluid power systems of industrial processes is considerable, especially for pneumatic systems. A novel isothermal compression method was proposed to lower the energy consumption of compressors. A porous medium was introduced to compose an isothermal piston. The porous medium was located beneath a conventional piston, and gradually immerged into the liquid during compression. The compression heat was absorbed by the porous medium, and finally conducted with the liquid at the chamber bottom. The heat transfer can be significantly enhanced due to the large surface area of the porous medium. As the liquid has a large heat capacity, the liquid temperature can maintain constant through circulation outside. This create near-isothermal compression, which minimizes energy loss in the form of heat, which cannot be recovered. There will be mass loss of the air due to dissolution and leakage. Therefore, the dissolution and leakage amount of gas are compensated for in this method. Gas is dissolved into liquid with the pressure increasing, which leads to mass loss of the gas. With a pressure ratio of 4:1 and a rotational speed of 100 rpm, the isothermal piston decreased the energy consumption by 45% over the conventional reciprocation piston. This gain was accomplished by increasing the heat transfer during the gas compression by increasing the surface area to volume ratio in the compression chamber. Frictional forces between the porous medium and liquid was presented. Work to overcome the frictional forces is negligible (0.21% of the total compression work) under the current operating condition.

Experimental and thermodynamic investigation on isothermal performance of large-scaled liquid piston

Experiments on Air Compression with an Isothermal Piston for Energy Storage

Energy-saving Technology and Experimental Research of Reciprocating Compressor

Liquid Piston Compression Heat Transfer Prediction via Thermal‐Resistance Network: Simulation, Experimental Validation, and Liquid Carryover Evaluation

Comprehensive thermo-exploration of a near-isothermal compressed air energy storage system with a pre-compressing process and heat pump discharging

Efficiency Analysis of an Arrayed Liquid Piston Isothermal Air Compression System for Compressed Air Energy Storage

A Novel Isothermal Compression Method for Energy Conservation in Fluid Power Systems

Effects of piston speed, compression ratio and cylinder geometry on system performance of a liquid piston

Optimisation of design parameters for a novel two-piston ionic compressor applied in hydrogen storage

Research of Balanced Piston Thermocompressor

Spray cooling technique in liquid piston gas compression and impact of air dissolution on efficiency evaluation at different pressure levels

Interrupted plate porous media design for ionic liquid-type liquid piston hydrogen compressor and analysis of the effect on compression efficiency

Transient flow performance and heat transfer characteristic in the cylinder of hydraulic driving piston hydrogen compressor during compression stroke

Simulation Research on Refrigeration Performance of Piston Compressor with Double Suction Ports

Experimental study on two-stage compression refrigeration/heat pump system with dual-cylinder rolling piston compressor

Liquid piston based on molecular springs for energy storage applications

Theoretical and experimental investigation on the rolling piston compressor with enhance vapor injection for heat pump system{fr}Etude théorique et expérimentale sur le compresseur à piston laminé avec injection de vapeur améliorée pour le système de pompe à chaleur

Effect of Integrating Metal Wire Mesh with Spray Injection for Liquid Piston Gas Compression

Investigation of clearance leakage and piston offset of Joule-Thomson linear compressors at high pressure ratios

Thermo-dynamic and economic analysis of a novel pumped hydro-compressed air energy storage system combined with compressed air energy storage system as a spray system

Experimental Investigation on Off-Design Characteristics of R290 Rolling Piston Compressor