Abstract:The increasing demand for wind power has led to a significant increase in the number and size of wind turbine blades manufactured globally. As the number and physical size of turbines deployed grow, the probability of manufacturing defects being present in composite turbine blades also increases. As capital blade costs and operational and maintenance expenses increase in ever larger turbine systems, the need for inspection of the structural health of large-scale turbine blades during operation critically increases. One method for locating and quantifying manufacturing defects, while also allowing for the in situ measurement of the structural health of blades, is monitoring the full-field deformation and strain of a blade. In a demonstration of this methodology, static tests were performed on a Sandia National Laboratories CX-100 9-m composite turbine blade to extract full-field displacement and strain measurements. Three-dimensional digital image correlation was used. Measurements were taken at previously identified damaged areas near the blade root, along the high- and low-pressure surfaces. The results indicate that the measurement approach can clearly identify failure locations and discontinuities in the blade curvature under load. Postprocessing of the data, using a stitching technique of digital image correlation snapshots taken along the length of the blade, allows observation of the shape and curvature of the entire blade. The experiment demonstrates the feasibility of the approach and reveals that the technique can be readily scaled to accommodate utility-scale blades. As long as a trackable pattern is applied to the surface of the blade, measurements can be made in situ when a blade is on a manufacturing floor, installed in a test fixture, or installed on a rotating turbine. The results demonstrate the potential of the optical measurement technique for use in the wind industry.

Automation Scanning Platform for Windturbine Blade Measurment

A Wind Energy Generation Replication Method with Wind Shear and Tower Shadow Effects

A New System for Automatic Measurement of the Three-Dimensional Form of Turbine Blades

Digital Template System for Measuring Turbine Blade Forging and Its Calibration Method

A High Precision Measurement Method of Large-Size Turbine Blade Based on Structured Light 3D Measurement

Rapid Method to Measure Turbine Blade Based on Laser Sensor

Fringe Projection Profilometry for Three-Dimensional Measurement of Aerospace Blades

An Efficient Automated Measurement Method for Aero-Engine Fan Blade Geometric Parameters

A Novel Rapid Measurement Approach for Blade of Large Water Turbine

Three‐dimensional Deformation Measurement of Aero‐engine High‐speed Rotating Blade Surface Based on Stroboscopic Structure Digital Image Correlation Method

A Machine Vision Method for Identifying Blade Tip Clearance in Wind Turbines

Structural Health Monitoring of Wind Turbine Blade Using Fiber Bragg Grating Sensors and Fiber Optic Rotary Joint

A novel transformer-enhanced and acoustic-based approach for wind turbine blade fault detection with integrated system implementation

3D Multiscale Dynamic Analysis of Offshore Wind Turbine Blade under Fully Coupled Loads

THE STRUCTURAL ANALYSIS METHOD OF WIND TURBINE BLADE BASED ON MECHANICS OF COMPOSITE MATERIALS

A rapid inspection method for large water turbine blade

A Novel Method for Aero Engine Blade Removed-Material Measurement Based on the Robotic 3D Scanning System

Integrated Analysis Method of Thin-Walled Turbine Blade Precise Machining

Overview on the Profile Measurement of Turbine Blade and Its Development

Automatic assembly of aero engine low pressure turbine shaft based on 3D vision measurement

Damage detection and full surface characterization of a wind turbine blade using three-dimensional digital image correlation