Abstract:Interest in organic electronic materials, and in particular their potential for low-cost fabrication over large areas, led to the development of organic field-effect transistors (OFETs). The potential of OFETs has been demonstrated in a variety of applications, including pixel drivers for displays, bionic skin, wearable electronics and sensitive chemical sensors that can operate in aqueous environments. OFETs use conjugated, semiconducting small molecules and polymers and offer an alternative to inorganic devices for applications in which facile processing on different substrates and tunable electronic properties are required. The flexibility requirement implies either performance stability towards deformation, or conversely, detectable response to the deformation itself. The knowledge of the electromechanical response of organic semiconductors to external stresses is therefore not only interesting from a fundamental point of view, but also necessary for the development of real world applications. To this end, this presentation highlights the importance of the choice of functional materials (organic semiconductors and dielectrics) as well as the relationship structure/properties in transistors based sensors. Organic semiconductors (OSCs) are promising transducer materials when applied in OFETs taking advantage of their electrical properties that highly depend on the morphology of the semiconducting film. The effects of a high-performance p-type organic semiconductor, namely dinaphtho [2,3-b:2,3-f] thieno [3,2–b] thiophene (DNTT) thickness on its piezoresistive sensitivity are presented. A critical thickness corresponding to the appearance of charge carriers percolation paths in the material can tune the gauge factors (GFs) by a factor 10. In addition, single crystal OSC are regarded as promising electroactive materials for strain sensing application. Herein this talk, we will present how strain induces simultaneous mobility changes along all three axes, and that in some cases the response is higher along directions orthogonal to the mechanical deformation. These variations cannot be explained by the modulation of intermolecular distances, but only by a more complex molecular reorganisation, which is particularly enhanced, in terms of response, by p-stacking and herringbone stacking. This microscopic knowledge of the relation between structural and mobility variations is essential for the interpretation of electromechanical measurements for crystalline organic semiconductors, and for the rational design of electronic devices. Alternatively, this talk will highlight how the use of an active gate dielectric layer such as poly(vinylidenefluoride/trifluoroethylene) (P(VDF-TrFE)) piezoelectric polymer can lead to highly efficient electro-mechanical sensitivity. In such case, the sensing mechanism of the electro-mechanical transducer originates from the piezoelectric material itself, which affects the electrical behavior of the transistor as signature of a mechanical event. The second part of this talk will focus on another kind of TFT based sensor, namely the organic electrochemical transistors (OECTs) which have found recently applications in chemical and biological sensing and interfacing and neuromorphic computing. OECT rely on ions that are injected from the electrolyte into polymer-based mixed conductors, thereby changing its doping state and hence its conductivity. While great progress has been achieved, organic mixed conductors frequently experience significant volumetric changes during ion uptake/rejection, i.e., during doping/ de-doping and charging/discharging. Although ion dynamics may be enhanced in expanded networks, these volumetric changes can have undesirable consequences, e.g., negatively affecting hole/electron conduction and severely shortening device lifetime. New materials able to transport ions and electrons/holes and that exhibits low swelling will be presented, expanding the materials-design toolbox for the creation of low-swelling soft mixed conductors with tailored properties and applications in bioelectronics and beyond.

Microfabrication of Organic Electrochemical Transistors for High‐Performance Integrated Bioelectronics

Vertical Organic Electrochemical Transistors for Complementary Circuits

Ac Electrodeposition Of Pedot Films In Protic Ionic Liquids For Long-Term Stable Organic Electrochemical Transistors

Empowering Bioelectronics with Supramolecular Nanoarchitectonics: PEDOT-Based Organic Electrochemical Transistors with Tunable Electronic Properties

Cleanroom‐Free Direct Laser Micropatterning of Polymers for Organic Electrochemical Transistors in Logic Circuits and Glucose Biosensors

In Situ Fabrication of Organic Electrochemical Transistors on a Microfluidic Chip

Fabrication of Organic Electrochemical Transistor Arrays for Biosensing

Vertical organic electrochemical transistor platforms for efficient electropolymerization of thiophene based oligomers

High-Performance Organic Electrochemical Transistors with Nanoscale Channel Length and Their Application to Artificial Synapse.

Molecular design strategies for high‐performance organic electrochemical transistors

Monolithically Integrated High-Density Vertical Organic Electrochemical Transistor Arrays and Complementary Circuits

Amphiphilic Interface-Mediated Ion Doping for High Performance Organic Electrochemical Transistors with Hydrophobic Polymers

Porous Semiconducting Polymers Enable High‐Performance Electrochemical Transistors

Fully 3D-Printed Organic Electrochemical Transistors

(Invited) Organic Thin Films Transistors: From Mechanical to Biochemical Sensors

Ultrathin Indium Tin Oxide Accumulation Mode Electrolyte‐Gated Transistors for Bioelectronics

Processing of organic electrochemical transistors

Organic Mixed Ionic Electronic Conductor Nanochannels for Vertical Electrochemical and Ionic Transistors

High-performance organic electrochemical transistors gated with 3D-printed graphene oxide electrodes

Tuning Organic Electrochemical Transistor Threshold Voltage using Chemically Doped Polymer Gates

High yield manufacturing of fully screen-printed organic electrochemical transistors